Remote
Work location
PC Case Mod Design Inspired by Monkey D. Luffy – Gear 5 Nika Ended
About the job
Project Brief: PC Case Mod Design Inspired by Monkey D. Luffy – Gear 5 Nika
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, wor... read more
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, wor... read more
Project Brief: PC Case Mod Design Inspired by Monkey D. Luffy – Gear 5 Nika
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, works as an additional compartment (PSU or storage), detachable bottom panel for ventilation/maintenance, straw-texture vents, optional lighting.
Hair and face: must be sculpted accurately as per reference images, maintaining Gear 5 features.
Hands: one hand positioned near the face (side angle), the other in a natural pose.
Smoke/cloud effects around shoulders and head: integrated into the design and used as ventilation channels.
Execution Requirements
Strong experience in organic sculpting and product/engineering design.
Ability to merge artistic aesthetics with functional hardware integration.
Prior PC Case Modding or similar hardware projects (preferred).
High precision in measurements to ensure hardware fit.
Design must be prepared for 3D printing (STL/OBJ files) and split into modular sections for assembly.
Must provide an Assembly Guide / Exploded View.
Final Deliverables
STL/OBJ files ready for 3D printing.
STEP file (optional).
Modular design split into sections ≤ 300 mm.
Exploded View and full Assembly Guide.
Work Process
Provide an initial sketch of the proposed Luffy Gear 5 Nika character design before execution.
Approval of the general shape (head, hair, face, hands, chest, straw hat).
Begin organic sculpting and engineering design.
Integrate internal component measurements into the bust.
Modular division for 3D printing.
Final delivery of files and documentation.
What Applicants Must Provide
Examples of previous similar work (especially organic character sculpts).
A clear timeline with phases and number of revisions per phase.
Best regards,
Murtada
(I use a translator, so my replies may be delayed – thank you for your understanding) read less
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, works as an additional compartment (PSU or storage), detachable bottom panel for ventilation/maintenance, straw-texture vents, optional lighting.
Hair and face: must be sculpted accurately as per reference images, maintaining Gear 5 features.
Hands: one hand positioned near the face (side angle), the other in a natural pose.
Smoke/cloud effects around shoulders and head: integrated into the design and used as ventilation channels.
Execution Requirements
Strong experience in organic sculpting and product/engineering design.
Ability to merge artistic aesthetics with functional hardware integration.
Prior PC Case Modding or similar hardware projects (preferred).
High precision in measurements to ensure hardware fit.
Design must be prepared for 3D printing (STL/OBJ files) and split into modular sections for assembly.
Must provide an Assembly Guide / Exploded View.
Final Deliverables
STL/OBJ files ready for 3D printing.
STEP file (optional).
Modular design split into sections ≤ 300 mm.
Exploded View and full Assembly Guide.
Work Process
Provide an initial sketch of the proposed Luffy Gear 5 Nika character design before execution.
Approval of the general shape (head, hair, face, hands, chest, straw hat).
Begin organic sculpting and engineering design.
Integrate internal component measurements into the bust.
Modular division for 3D printing.
Final delivery of files and documentation.
What Applicants Must Provide
Examples of previous similar work (especially organic character sculpts).
A clear timeline with phases and number of revisions per phase.
Best regards,
Murtada
(I use a translator, so my replies may be delayed – thank you for your understanding) read less
Project Brief: PC Case Mod Design Inspired by Monkey D. Luffy – Gear 5 Nika
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components.... read more
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components.... read more
Project Brief: PC Case Mod Design Inspired by Monkey D. Luffy – Gear 5 Nika
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, works as an additional compartment (PSU or storage), detachable bottom panel for ventilation/maintenance, straw-texture vents, optional lighting.
Hair and face: must be sculpted accurately as per reference images, maintaining Gear 5 features.
Hands: one hand positioned near the face (side angle), the other in a natural pose.
Smoke/cloud effects around shoulders and head: integrated into the design and used as ventilation channels.
Execution Requirements
Strong experience in organic sculpting and product/engineering design.
Ability to merge artistic aesthetics with functional hardware integration.
Prior PC Case Modding or similar hardware projects (preferred).
High precision in measurements to ensure hardware fit.
Design must be prepared for 3D printing (STL/OBJ files) and split into modular sections for assembly.
Must provide an Assembly Guide / Exploded View.
Final Deliverables
STL/OBJ files ready for 3D printing.
STEP file (optional).
Modular design split into sections ≤ 300 mm.
Exploded View and full Assembly Guide.
Work Process
Provide an initial sketch of the proposed Luffy Gear 5 Nika character design before execution.
Approval of the general shape (head, hair, face, hands, chest, straw hat).
Begin organic sculpting and engineering design.
Integrate internal component measurements into the bust.
Modular division for 3D printing.
Final delivery of files and documentation.
What Applicants Must Provide
Examples of previous similar work (especially organic character sculpts).
A clear timeline with phases and number of revisions per phase.
Best regards,
Murtada
(I use a translator, so my replies may be delayed – thank you for your understanding) read less
I am looking for a professional 3D designer/modeler to execute a special project: designing a PC Case Mod in the form of the upper half of Monkey D. Luffy – Gear 5 Nika from the anime One Piece.
The requirement is only the external bust/case design, with precise internal measurements to fit real hardware components. I do not need 3D models of the internal parts (motherboard, GPU, etc.). The design must ensure accurate dimensions for compatibility.
Components to Fit (Internal Dimensions Only)
Motherboard (ATX): 305 × 244 mm
Graphics Card (GPU): 302 × 130 × 56 mm
Power Supply (PSU): 160 × 150 × 86 mm
AIO 360 Radiator with fans: 397 × 120 × 52 mm
CPU Block: Ø80 × 55 mm
Maximum Overall Case Dimensions
Height: ≤ 690 mm
Depth: ≤ 300 mm
Width: ≤ 450 mm
Clearance behind motherboard tray: ≥ 20 mm (for cable management)
Cooling Layout
360 Radiator mounted at the back or side (Exhaust).
Two shoulder fans (120–140 mm, preferably side or back to avoid distorting the front view).
One slim 120 mm head fan (Exhaust).
Air ducts/baffles to optimize airflow and avoid heat recirculation.
Artistic/Design Details
General style: cel-shaded anime look with bold colors and clear details.
Chest “X” mark: transparent acrylic/plexiglass window, slightly curved like a scar, supported with an inner frame, optional RGB lighting.
Straw Hat: placed behind the neck, works as an additional compartment (PSU or storage), detachable bottom panel for ventilation/maintenance, straw-texture vents, optional lighting.
Hair and face: must be sculpted accurately as per reference images, maintaining Gear 5 features.
Hands: one hand positioned near the face (side angle), the other in a natural pose.
Smoke/cloud effects around shoulders and head: integrated into the design and used as ventilation channels.
Execution Requirements
Strong experience in organic sculpting and product/engineering design.
Ability to merge artistic aesthetics with functional hardware integration.
Prior PC Case Modding or similar hardware projects (preferred).
High precision in measurements to ensure hardware fit.
Design must be prepared for 3D printing (STL/OBJ files) and split into modular sections for assembly.
Must provide an Assembly Guide / Exploded View.
Final Deliverables
STL/OBJ files ready for 3D printing.
STEP file (optional).
Modular design split into sections ≤ 300 mm.
Exploded View and full Assembly Guide.
Work Process
Provide an initial sketch of the proposed Luffy Gear 5 Nika character design before execution.
Approval of the general shape (head, hair, face, hands, chest, straw hat).
Begin organic sculpting and engineering design.
Integrate internal component measurements into the bust.
Modular division for 3D printing.
Final delivery of files and documentation.
What Applicants Must Provide
Examples of previous similar work (especially organic character sculpts).
A clear timeline with phases and number of revisions per phase.
Best regards,
Murtada
(I use a translator, so my replies may be delayed – thank you for your understanding) read less
Things to know
Any
Skill Level
$50
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Design
3D Mechanical Design
3D Modeling
3D Solidworks
3d blender
Blender
Fusion 360
OBJ, FBX, STL, STEP
ZBrush
+6 more
Job categories
3D Modeling
3D Character Animation
3D Character Modeling Services
Pet Product Design
3D Presentation Design
+2 more
About the client
Payment ready
Iraq (02:33 am)
Posted
Active
Job activity
8 Applicants
5 interviews in progress
11 unanswered invites
Similar jobs
Carveco / ArtCAM Designer to create STL files for 3-D CNC carving
Remote - Posted
We are seeking an experienced ArtCAM designer to convert concept images into high-quality, CNC-ready STL files for 3D carving and routing. The role involves interpreting refer...
Blender 3D Modeling Services
3D Modeling
3D CAD Translation Services
View job
3D RELIEF MODEL
Remote - Posted
Create a 3D relief model of this image in STL or OBJ format. I will be using it in Fusion 360 to generate toolpaths for CNC Carving. Include depth scaling and surface smoothin...
3D Architectural Visualization Services
3D Modeling
3D Art Design Services
3D Visualization Services
3D Architectural Modeling
View job
CAD Specialist: Remodel 6 Noel Chair Variations from 3ds Max to Clean STEP Files
Remote - Posted
CAD Specialist: Remodel 6 Noel Chair Variations from 3ds Max to Clean STEP Files
I. Project Overview:
We are seeking an experienced CAD professional in Vietnam (preferab...
3D CAD Translation Services
AutoCAD Drawing Services
CAD Drawing Standardization
3D Modeling
View job
Mechanical CAD Designer Needed (3D Printed Prototype)
Remote - Posted
Hi, I'm James. I need a small CAD project completed. It’s a very straightforward job for anyone experienced in mechanical CAD. I’ve uploaded a document below that clearly show...
3D Design Services
Mechanical CAD Design
3D Modeling
3D Printing Design
View job
Silicone pouch project
Remote - Posted
Evaluate a larger product and better understand its functional behavior, existing silicone pouch needs to be integrated with an air pump capable of operating for up to 30 minu...
3D Architectural Modeling
3D Presentation Design
3D Printing Design
3D Product Modeling
View job
3D CAD Modeling for Cold-Weather Mask V0 Prototype (Shell + Wing Cavities + Caps)
Remote - Posted
I need manufacturable CAD (STEP + STL) of a mask concept. All dimensions and function provided below
3D Modeling
3D CAD Translation Services
3D Product Modeling
Prototype Design Engineering
3D Printing Design
View job
