Remote
Work location
Drawing Required for Lightning Protection Installation on Communication Tower Ended
About the job
I’m looking for a drawing to support the installation of a lightning protection device (CMCE) on a 100’ communication tower. I may also be interested in a 3D rendering, depending on pricing.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started.
I’m looking for a drawing to support the installation of a lightning protection device (CMCE) on a 100’ communication tower. I may also be interested in a 3D rendering, depending on pricing.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started.
I’m looking for a drawing to support the installation of a lightning protection device (CMCE) on a 100’ communication tower. I may also be interested in a 3D rendering, depending on pricing.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• Afte... read more
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• Afte... read more
I’m looking for a drawing to support the installation of a lightning protection device (CMCE) on a 100’ communication tower. I may also be interested in a 3D rendering, depending on pricing.
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started. read less
Scope of Work:
• My customer currently has an antenna mounted at the top of the tower. We’ll be removing it and relocating it slightly down the tower using a stand-off bracket (I’ll send the link).
• After relocation, the top of the antenna should be flush with the top of the tower.
• On top of the tower is a 10’ metal pole with a 1.5” inner diameter.
• The CMCE lightning protection unit will be installed at the very top, sliding into the pole and secured using a small screw through the stem of the device.
What I’ll Provide:
• Links to drawings/specs for the tower and antenna
• Link to the stand-off bracket
• Photos of the CMCE unit- link to website
ALL I REALLY NEED IS THE TOP PART OF THE COMMUNICATION TOWER WHERE THE LIGHTNING PROTECTION UNIT WILL BE. ALREADY HAVE A WIND LOAD STUDY DONE. MOSTLY JUST A VISUAL REPRESENTATION OF THE INSTALLATION.
I’m looking for a clean, to-scale 2D drawing, and possibly a 3D rendering depending on the scope and your pricing.
Let me know if this is something you can help with and what you’d need from me to get started. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D CAD Drawings
CAD Design and Drafting
CAD Technical Drafting
Conceptual Design
Structural Design
Structural Drafting
+3 more
Job categories
CAD Drafting Services
Structural Engineering
Construction Drawings
2D CAD Design Services
AutoCAD Drawing Services
+2 more
About the client
Payment ready
United States (06:32 pm)
Posted
Active
Job activity
16 Applicants
0 interviews in progress
14 unanswered invites
Similar jobs
Part time 2D CAD drafting
Hanoi, Vietnam - Posted
Make edits on existing CAD files based on comments on PDF plots. Landscape and streetscape dwg. About one day or less a week. Project span 1 year. Fluent in English technical...
2D CAD Drafting Services
CAD Drafting Services
General CAD Drafting
View job
Caster Design CAD Files
Remote - Posted
Designer to draw and provide complete CAD STEP files and individual STEP files of each component for caster based on my sketch provided. Also 2D flat drawings and reference t...
2D CAD Design Services
3D Design Services
Mechanical Design Services
View job
AutoLISP Add-in for AutoCAD/ LT 2026
Remote - Posted
would like to receive a price quote to develop an AutoLISP add-in for AutoCAD
AutoCAD LT 2026
The tool should automate the creation of closures/contours with coordinate l...
2D to 3D Modeling
AutoCAD Drafting & Design
AutoCAD Drawing Services
View job
Quick Engineering Review and Stamp-- NH, USA
Remote - Posted
I need stamped framing drawings for a job in New Hampshire. Budget is $750-1200. License must apply in NH.
-This is a one time project and the drawings are needed ASAP for bu...
Architectural Drafting Services
Structural Engineering
View job
edit basic 200m2 residential flat .dwg with furniture sizes
Remote - Posted
Prince please redo the plans as per this ipladed file. be sure to think through as all the sizes of furniture etc are on previous plans so add as much detail as possible
CAD Drawing Services
AutoCAD Drawing Services
View job
Autocad P&ID and Process layouts Fuel Depots. 2d, 3d
Remote - Posted
We are seeking an experienced AutoCAD draughtsman (freelance, remote) to develop Process and Instrumentation Diagrams (P&IDs) and related CAD deliverables for a fuel installat...
2D to 3D Modeling
Mechanical Design Services
2D CAD Design Services
2D CAD Drafting Services
Contract Drafting Services
View job
