Remote
Work location
3D CAD Model for Molded Rubber Outsole (Work Boot – Fixed Price) Ended
About the job
We are developing a new ergonomic work boot with a custom rubber outsole and require a mold-ready 3D CAD model based on our technical drawings.
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling... read more
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling... read more
We are developing a new ergonomic work boot with a custom rubber outsole and require a mold-ready 3D CAD model based on our technical drawings.
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling, size scaling, and additional product lines. read less
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling, size scaling, and additional product lines. read less
We are developing a new ergonomic work boot with a custom rubber outsole and require a mold-ready 3D CAD model based on our technical drawings.
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:... read more
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:... read more
We are developing a new ergonomic work boot with a custom rubber outsole and require a mold-ready 3D CAD model based on our technical drawings.
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling, size scaling, and additional product lines. read less
This job is for the outsole only—no upper or full shoe design required.
You will receive 2D technical drawings after signing a non-disclosure agreement (NDA). The model will be used for rubber injection or compression molding.
⸻
Scope of Work:
• Build a 3D model in STEP and STL formats ready for manufacturing
• Key design features:
• 4mm base thickness
• 5mm lug height across outsole base
• Variable sidewall lug height
• Sidewall wrap and stitch groove/inlay channel
• Apply appropriate draft angles, wall thickness, and mold tooling considerations
⸻
Deliverables:
• Mold-ready STEP and STL files
• Clean, structured CAD files for feedback/review
• Files optimized for mold tooling or 3D mold simulation
⸻
Requirements:
• Experience with footwear outsoles or rubber part design
• Skilled in SolidWorks, Fusion 360, or Rhino
• Familiar with draft angle, split lines, and moldable geometry
• Ability to work from orthographic drawings
⸻
Confidentiality:
An NDA is required before any files are released. The project contains proprietary geometry and IP.
⸻
Budget & Timeline:
• Fixed price: AUD $700–$1,000
• Delivery preferred within 5 days after NDA signing and file transfer
⸻
Ongoing Opportunity:
If successful, this job may lead to further design work for upper modeling, size scaling, and additional product lines. read less
Things to know
Expert
Skill Level
$1,000
Fixed-rate (USD)
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D CAD Modeling
3D Drafting & Design
3D Mechanical Design
3D Mold Design
3D Product Design
3D Technical Drawings
Footwear Design & CAD Drawings
Fusion 360
Injection Mold Design
Rhino 3D
STEP/STP 3D Modeling
STL Modeling
SolidWorks 3DEXPERIENCE
+11 more
Job categories
3D Product Rendering and Design
Engineering Design
3D Modeling
CAD Design File Validation
Industrial Design Services
+2 more
About the client
Payment not ready
Australia (10:52 am)
Posted
Active
Job activity
41 Applicants
0 interviews in progress
Similar jobs
Remote Mozaik Cabinet Drafter Translator
Remote - Posted
• Convert approved designs into production-ready cabinet drawings
• Prepare Mozaik files for CNC manufacturing
• Generate cutlists, labels, and nesting sheets
• Review d...
2D CAD Drafting Services
2D CAD Design Services
3D Modeling
View job
Injection Molding CAD Designer Needed — Convert 3D Mesh to STEP Files (DFM)Injection Molding CAD Designer Needed — Convert 3D Mesh to STEP Files (DFM)
Remote - Posted
Injection Molding CAD Designer — Convert 3D Mesh to STEP Files (DFM Required)
Project Overview
I'm developing a retro-style beverage dispenser product and need an experience...
3D Modeling
Injection Molding Design
DFM Services
Design for Manufacturability (DFM Services)
View job
Water distribution design in EPANET
Remote - Posted
A day work for developing EPANET Design for collected coordinates and elevation
1. Full map of all data
2. Zonal map of data
There are 8-9 coordinates collected.
Civil Engineering
3D Modeling
3D Design Services
View job
Telescopic Under-Saddle Bicycle Fender — Mechanical Design for FDM Printing
Remote - Posted
I need a freelance mechanical designer to create a retractable, telescopic rear fender that mounts under a road/gravel bike saddle. The reference style is the "Beatail" fender...
3D Printing Design
3D Modeling
3D Product Modeling
View job
NEXT GEN TACTICAL CINEMATIC UAV DESIGNS
Remote - Posted
Hello
We are building a next generation UAV ecosystem under AEGIS and are looking for a serious aerospace or mechanical systems engineer capable of designing production rea...
Aerospace Engineering
Industrial Design Services
Concept Design
Product Engineering Services
Drone Design
View job
3d modeling
Vadodara, India - Posted
want to build a new 3d design in reference to the existing design model which i have
3D Design Services
3D Models of Machine Parts
3D Modeling
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
191,914
global members
32,689
projects delivered to clients
Trusted by
