Remote
Work location
car bodykit 3d modeling Ended
About the job
Hello.
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side)
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side)
Hello.
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side)
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side)
Hello.
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650... read more
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650... read more
Hello.
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side) read less
Need work in 3d modeling for for my project.
I want to make a bodykit for my vw golf 5, in an attempt to print it on a 3d printer.
The input data are (files that I provide):
- 3d scan of my car
- 3d scan of the front grille (the one next to the hood)
- scan of the honeycomb grille for the rear bumper
- scan of the honeycomb grille for the front bumper
- 3d scan of the Vw W12 650 concept model
I need a 3d model of a bodykit that can be 3d printed and then attached to the current body of the car, by adding or cutting out the areas in the bumper that need to be removed
The resulting 3d model must resemble 95% of the concept presented by vw under the name vw golf w12 650.PS: the only change compared to the original concept is that the width of the car is increased by only 4cm (2cm on each side) read less
Things to know
Intermediate
Skill Level
$1,000
Fixed-rate (USD)
Part-time
Job type
1-3 months
Job duration
Areas of expertise
3D Modeling
3D Part Design
Job categories
3D Modeling
Automotive Design
About the client
Payment not ready
Romania (05:15 am)
Posted
Active
Job activity
33 Applicants
0 interviews in progress
Similar jobs
PDF To Autocad
Remote - Posted
Convert multiple H675 electrical PDF drawings into clean, fully editable DWG files compatible with AutoCAD Electrical 2027.
The PDFs have different sheet sizes and scales....
2D CAD Design Services
3D Design Services
3D Modeling
View job
Geometric Spherical Assembly, impact resistant, fully detachable
Remote - Posted
Looking for an experienced CAD designer to create a 3D-printable model that is an impact-resistant decorative toy/art piece. The project involves precise geometric modeling, i...
Mechanical Design Services
3D Modeling
3D Design Services
View job
CAD design
Remote - Posted
Hello,
We are looking for an experienced CAD designer to assist a robotics team with the CAD design and development of their robot chassis for the upcoming season.
The...
3D Design Services
CAD Design File Validation
3D Modeling
View job
Seeking Professional for Custom Cabinetry Making
Remote - Posted
Seeking programmer proficient in Vectric software for CNC machine. Looking to build Vectric codes to create custom cabinets using CNC machine. Will pay hourly or by the job, a...
Industrial Design Services
Furniture Design and Engineering Services
Furniture Design
Shop Drawing Services
3D Modeling
View job
Handheld Syringe Plunger Assist Device – Mechanical Design & Prototype
Remote - Posted
Hi, I’m developing a compact handheld device to push and pull a 20 mL syringe plunger during medication preparation. My current concept uses a motor with dual synchronized lea...
Medical Devices Design
Industrial Design Services
Prototype Design Services
3D Modeling
Mechanical Design Services
View job
White Cockatoo and Frogs Didgeridoo stl files for CNC sculpting
Remote - Posted
I need these didges modelled as previous. Could you model them full size and with the origin level with the bottom and centered on the 102mm square hole? See attached files fo...
3D Modeling
3D Design Services
Engineering Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
205,299
global members
33,352
projects delivered to clients
Trusted by
