Remote
Work location
P&ID devoloping Ended
About the job
Dear Gents,
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculatio... read more
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculatio... read more
Dear Gents,
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculation that meet feed rates.
7. Power balance & distribution architecture
8. Panel and Junction Box integration
9. Cable selection table & calculation
10. SIL calculation if applicable
11. Programming dev.
12. Safety & Interlock table
13. Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must to be used
1. Smart 3D -2016 Hotfix81
2. Smart Sketch-2016
3. MS SQL Server- 2014 Standard edition
4. Microsoft Office- 2013SP1 32
So, kindly if you have the capability to provide such services, please let me know and please note that this subject is so urgent.
Please note that, the main P&ID will be provided as guidelines but, equipment selection and datasheet shall be selected based on the current parameters. read less
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculation that meet feed rates.
7. Power balance & distribution architecture
8. Panel and Junction Box integration
9. Cable selection table & calculation
10. SIL calculation if applicable
11. Programming dev.
12. Safety & Interlock table
13. Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must to be used
1. Smart 3D -2016 Hotfix81
2. Smart Sketch-2016
3. MS SQL Server- 2014 Standard edition
4. Microsoft Office- 2013SP1 32
So, kindly if you have the capability to provide such services, please let me know and please note that this subject is so urgent.
Please note that, the main P&ID will be provided as guidelines but, equipment selection and datasheet shall be selected based on the current parameters. read less
Dear Gents,
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection... read more
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection... read more
Dear Gents,
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculation that meet feed rates.
7. Power balance & distribution architecture
8. Panel and Junction Box integration
9. Cable selection table & calculation
10. SIL calculation if applicable
11. Programming dev.
12. Safety & Interlock table
13. Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must to be used
1. Smart 3D -2016 Hotfix81
2. Smart Sketch-2016
3. MS SQL Server- 2014 Standard edition
4. Microsoft Office- 2013SP1 32
So, kindly if you have the capability to provide such services, please let me know and please note that this subject is so urgent.
Please note that, the main P&ID will be provided as guidelines but, equipment selection and datasheet shall be selected based on the current parameters. read less
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
1. Process Description,
2. Equipment selection
3. Equipment datasheets
4. Equipment install location with full descriptions.
5. P&ID Review,
6. HAZOP participation
7. Equipment List & Design,
8. Design of the Fluidized Bed Reactor,
9. equipment integration in the module,
10. Fluids list(utilities)
11. Line size definition and list,
12. Drops and losses calculation,
13. Approval / Deviation List of conformity of norms & specification (SES) holistically
14. ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
15. - S3D & 3D modulization of the modular package,
16. - Detail engineering of the equipment,
17. - Structure design and calculation,
18. - Piping support design and calculation,
19. - Interface list en detail with other packages,
20. - Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
1. Functional analysis
2. Instrumentation datasheet and Input/Output list
3. Automation architecture
4. Design of power panel
5. Design of Automation Panel
6. Design of VFD with speed calculation that meet feed rates.
7. Power balance & distribution architecture
8. Panel and Junction Box integration
9. Cable selection table & calculation
10. SIL calculation if applicable
11. Programming dev.
12. Safety & Interlock table
13. Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must to be used
1. Smart 3D -2016 Hotfix81
2. Smart Sketch-2016
3. MS SQL Server- 2014 Standard edition
4. Microsoft Office- 2013SP1 32
So, kindly if you have the capability to provide such services, please let me know and please note that this subject is so urgent.
Please note that, the main P&ID will be provided as guidelines but, equipment selection and datasheet shall be selected based on the current parameters. read less
Things to know
Expert
Skill Level
$10 - $50/hr
Hourly (USD)
Part-time
Job type
1-3 months
Job duration
Areas of expertise
Instrumentation
Piping Support Design
Programming
Structure Design
+1 more
Job categories
Electrical Drafting
Assembly Drawing Services
CAD Drawing Services
Electrical Instrumentation Services
CAD Drafting Services
+2 more
Languages
English
Full professional proficiency
About the client
Payment not ready
Saudi Arabia (01:17 am)
Posted
Active
Job activity
9 Applicants
0 interviews in progress
Similar jobs
Low Voltage AutoCAD Drafter - Data, AV & Security (Fast Turnaround)
Remote - Posted
We are looking for an experienced AutoCAD drafter to assist with producing professional low-voltage construction drawings for commercial and institutional projects, including...
Architectural Planning and Design
Architectural Site Plans
Electrical Drafting
Drafting and Design Services
General CAD Drafting
View job
Site measure & CAD drawings
Hong Kong - Posted
This is a one time project to measure a site and draw up a full set of plans and elevations in 2D autocad for a commercial space in HK. The needed floors are for the ground fl...
Architectural Drafting Services
CAD Drafting Services
Architectural Drawing Services
View job
Cad Drawings for my new project
Remote - Posted
I am looking for a freelance industrial product designer/CAD designer for a small consumer product project.
I have a reference image of a slim, cylindrical Meswak pod and n...
CAD Drawing Services
AutoCAD Drafting & Design
2D CAD Drafting Services
View job
Mechanical Design Engineer (CAD + DFM) — Shenzhen on-site, ASAP
Shenzhen, China - Posted
We’re Voyage (voyage.inc), building a non-invasive silent-speech wearable in Shenzhen. Looking for a mechanical / structural design engineer who can own enclosure CAD, DFM wit...
3D CAD Translation Services
CAD Drafting Services
Mechanical CAD Design
Mechanical Design Services
Mechanical Engineering
View job
Structural Engineer for AutoCAD, ETABS and SAFE
Remote - Posted
I am looking for a qualified civil and structural engineer to assist with structural engineering drawings and analysis using AutoCAD, ETABS, and SAFE. The work may include 2D...
Structural Design Services
CAD Drafting Services
Structural Engineering
Civil Engineering
View job
Step files into industrial sheet drawing
Remote - Posted
I have IP65 boxes and enclosures 3D design i want to customize a dwg sheet and want industrial level 2D drawings
Mechanical Drafting
CAD Drafting Services
Manufacturing Drawings
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
217,422
global members
33,594
projects delivered to clients
Trusted by
