Remote
Work location
Test a SOLIDWORKS add-in Anyone
About the job
Hi, I'm Jeff. I'm building Vector, an add-in for SOLIDWORKS that helps with CAD tasks in your normal workflow.
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
Thi... read more
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
Thi... read more
Hi, I'm Jeff. I'm building Vector, an add-in for SOLIDWORKS that helps with CAD tasks in your normal workflow.
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
This is a one-time session to complete within the next two weeks at a mutually agreed time. Once hired, you'll be paid for the agreed session even if setup or Vector fails or your feedback is negative. If something blocks the test, send the error or describe what happened. No public review or promotional post is required.
Vector is free to keep using indefinitely; continued use and further testing are optional.
Thanks!
Jeff read less
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
This is a one-time session to complete within the next two weeks at a mutually agreed time. Once hired, you'll be paid for the agreed session even if setup or Vector fails or your feedback is negative. If something blocks the test, send the error or describe what happened. No public review or promotional post is required.
Vector is free to keep using indefinitely; continued use and further testing are optional.
Thanks!
Jeff read less
Hi, I'm Jeff. I'm building Vector, an add-in for SOLIDWORKS that helps with CAD tasks in your normal workflow.
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feed... read more
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feed... read more
Hi, I'm Jeff. I'm building Vector, an add-in for SOLIDWORKS that helps with CAD tasks in your normal workflow.
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
This is a one-time session to complete within the next two weeks at a mutually agreed time. Once hired, you'll be paid for the agreed session even if setup or Vector fails or your feedback is negative. If something blocks the test, send the error or describe what happened. No public review or promotional post is required.
Vector is free to keep using indefinitely; continued use and further testing are optional.
Thanks!
Jeff read less
I'm looking for people who already use SOLIDWORKS to try it for a paid 10-minute test. I'd like honest feedback on a small CAD task: what helps, what is confusing and where it gets stuck.
Pay: $10 USD per tester for one 10-minute session, including setup, a screenshot and brief feedback. The test is asynchronous; no call or recording is needed.
During the 10 minutes:
1. Install Vector on your Windows computer. We'll provide access at no cost. You should already have SOLIDWORKS installed.
2. Use any non-confidential SOLIDWORKS part or assembly of your own and try whatever part of your normal workflow is useful, such as changing a dimension, editing a feature or troubleshooting a modeling error. We won't provide a model or prescribed task.
3. Send a screenshot showing Vector running alongside SOLIDWORKS and a few brief notes on what you tried, what was useful and anything confusing or broken.
After hiring, we'll share the download and tester Discord links. Join the other testers there, report bugs and feedback in #feedback, and suggest features in #feature-requests. Send your screenshot, short notes and Discord username through Cad Crowd too. Payment stays on Cad Crowd.
To apply, just tell us in one sentence what you use SOLIDWORKS for and confirm you have it installed on Windows. No portfolio, detailed proposal or test work is needed to apply.
This is a one-time session to complete within the next two weeks at a mutually agreed time. Once hired, you'll be paid for the agreed session even if setup or Vector fails or your feedback is negative. If something blocks the test, send the error or describe what happened. No public review or promotional post is required.
Vector is free to keep using indefinitely; continued use and further testing are optional.
Thanks!
Jeff read less
Things to know
Any
Skill Level
$10
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Modeling
3D Modeling
Parametric Modeling
Solidworks Mechanical Design
Solidworks design
+2 more
Job categories
CAD Design File Validation
SolidWorks Design Services
SolidWorks Engineering Services
About the client
Payment ready
United States (01:57 pm)
Posted
Active
Job activity
2 Applicants
0 interviews in progress
More open jobs from this client (1)
Test an Autodesk Fusion add-in
Remote - Posted
Hi, I'm Jeff. I'm building Vector, an add-in for Autodesk Fusion that helps with tasks like constraining sketches, organizing the feature tree and fixing modeling errors.
I...
CAD Design File Validation
Mechanical Design Services
3D Design Services
View job
Similar jobs
Luminaire Mechanical Engineer / Technical Drafter (Independent Contractor or Full-Time)
Remote - Posted
We are looking for a highly skilled mechanical drafter/fixture engineer to serve as the bridge between conceptual design and our fabrication floor. We, Phoenix Day, are a cus...
Mechanical Drafting
Mechanical Design Services
SolidWorks Design Services
Lighting Fixtures Design
Manufacturing Drawings
View job
Manhole cover in Solidworks
Remote - Posted
Design of Watertight, Aluminium Manhole Cover with opening mechanism
The design must include:
aluminium checker plate cover;
structural support frame;
sealing;
must b...
3D Modeling
SolidWorks Design Services
3D Design Services
View job
Test an Autodesk Fusion add-in
Remote - Posted
Hi, I'm Jeff. I'm building Vector, an add-in for Autodesk Fusion that helps with tasks like constraining sketches, organizing the feature tree and fixing modeling errors.
I...
CAD Design File Validation
Mechanical Design Services
3D Design Services
View job
Solid Works
Remote - Posted
Position: SolidWorks Designer / Interior Design Engineer
Key Responsibilities:
Create detailed 3D models and 2D manufacturing drawings using SolidWorks.
Design interior...
SolidWorks Design Services
3D Design Services
3D Modeling
View job
Underwater Enclosure for Scanning Echo Sounder
India - Posted
Underwater Ultrasonic Mechanical Scanning Device
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKI...
Mechanical Design Services
CAD Drawing Services
SolidWorks Design Services
View job
Designer needed for ongoing projects
Remote - Posted
We have a range of products that require ongoing design updates and changes. It's mainly sheetmetal orientated and we use Solidworks and PDM
SolidWorks Design Services
Design & Drafting
Industrial Design Services
General Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
210,657
global members
33,396
projects delivered to clients
Trusted by
