Remote
Work location
150 ml cosmetic tube – 3D CAD design from reference photo, STEP delivery Anyone
About the job
I am looking for an experienced CAD designer to create a cosmetic packaging shape based on the attached reference photo. No existing CAD file will be provided.
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capac... read more
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capac... read more
I am looking for an experienced CAD designer to create a cosmetic packaging shape based on the attached reference photo. No existing CAD file will be provided.
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capacity was estimated.
Review and revisions:
Please submit an initial proposal showing the overall shape, dimensions and groove arrangement for review before finalizing the model.
I would like to be able to request modifications to the shape, proportions and grooves before final approval. Please include revision rounds in your quotation and clearly state how many are included.
Further projects:
We have other packaging design projects planned and are looking for a designer we can work with on an ongoing basis.
Please provide your fixed-price quotation, estimated turnaround time and examples of relevant packaging or surface modeling work. read less
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capacity was estimated.
Review and revisions:
Please submit an initial proposal showing the overall shape, dimensions and groove arrangement for review before finalizing the model.
I would like to be able to request modifications to the shape, proportions and grooves before final approval. Please include revision rounds in your quotation and clearly state how many are included.
Further projects:
We have other packaging design projects planned and are looking for a designer we can work with on an ongoing basis.
Please provide your fixed-price quotation, estimated turnaround time and examples of relevant packaging or surface modeling work. read less
I am looking for an experienced CAD designer to create a cosmetic packaging shape based on the attached reference photo. No existing CAD file will be provided.
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proporti... read more
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proporti... read more
I am looking for an experienced CAD designer to create a cosmetic packaging shape based on the attached reference photo. No existing CAD file will be provided.
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capacity was estimated.
Review and revisions:
Please submit an initial proposal showing the overall shape, dimensions and groove arrangement for review before finalizing the model.
I would like to be able to request modifications to the shape, proportions and grooves before final approval. Please include revision rounds in your quotation and clearly state how many are included.
Further projects:
We have other packaging design projects planned and are looking for a designer we can work with on an ongoing basis.
Please provide your fixed-price quotation, estimated turnaround time and examples of relevant packaging or surface modeling work. read less
The goal is to reproduce the reference design as closely as possible, adapting its dimensions for a target capacity of 150 ml rather than the 200 ml shown in the photo.
Design requirements:
• Match the overall silhouette and proportions of the reference, with more pronounced grooves.
• Provide a solid volume representing the external shape. A hollow shell is not required.
• Size the body for an approximate internal capacity of 150 ml, allowing for a nominal wall thickness of 0.3 mm.
• The body must transition to a circular cross-section with an outside diameter of 35.5 mm at the junction with the cap.
• I will design the detailed neck and cap geometry myself; these are outside your scope.
• All grooves must start near the cap on a common small-diameter circle, with identical starting geometry and equal spacing around the full circumference.
• The grooves must progressively fan upward and outward as the body widens.
• Maintain perfect front/back and left/right symmetry, without twisting.
• Ensure smooth surface transitions throughout the design.
• Branding, text and label artwork are not required.
Deliverables:
• Final model in STEP format, as a clean, watertight CAD solid.
• Front, side and perspective previews for review.
• Overall dimensions and an explanation of how the approximate 150 ml capacity was estimated.
Review and revisions:
Please submit an initial proposal showing the overall shape, dimensions and groove arrangement for review before finalizing the model.
I would like to be able to request modifications to the shape, proportions and grooves before final approval. Please include revision rounds in your quotation and clearly state how many are included.
Further projects:
We have other packaging design projects planned and are looking for a designer we can work with on an ongoing basis.
Please provide your fixed-price quotation, estimated turnaround time and examples of relevant packaging or surface modeling work. read less
Things to know
Expert
Skill Level
$350
Fixed-rate (USD)
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Modeling
3D Modeling
3D Product Design
Industrial Design
Reverse Engineering
+2 more
Job categories
3D Design Services
3D Product Modeling
Cosmetic Packaging Design
About the client
Payment not ready
France (08:40 pm)
Posted
Active
Job activity
11 Applicants
0 interviews in progress
Similar jobs
3D-CAD Planer-in / 3D CAD Draftsperson.
Remote - Posted
Profil:
. Technischer CAD-Zeichne mit 2-3 Jahre Erfahrung
. Sehr gute SolidWorks-Kenntnisse
. Erfahrung 3D-Zeichnungen
. Erfahrung im Bereich Maschinenbau, Anlagenbau, L...
3D Modeling
3D Design Services
Engineering Design
View job
RMU Design with VCB
Remote - Posted
We need RMU with one 630A VCB and two Load break switches/Isolators. Design stanadards are as attached. We need 100% Guaranteed design to pass the CPRI testing on enclosure an...
Electrical Engineering
Fabrication Drawings Services
3D Design Services
View job
Freelancer Architectural Cad Operator
India - Posted
I am looking for sincere, committed Freelancer Architectural Cad Operator ONLY from India.
Architects, Interior Designers, Engineers Need Not reply PLEASE.
Architectural Drawing Services
3D Design Services
3D Modeling
View job
Flygt Submersble Pump Modular Pontoon Design
Remote - Posted
I'm looking for someone who can design a modular pontoon for a flygt submersible pump BS 2201.I have the GA drawings for the pump and concepts of how the pontoon is to be. At...
Mechanical Engineering
3D Design Services
3D Modeling
View job
Need someone to CAD a 3D model of my toy design
Remote - Posted
I’m looking for a 3D/CAD product designer to help turn my concept for a customizable collectible figure into a functional, 3D-printable prototype.
The figure will be approx...
3D Modeling
Toys & Games Design
3D Product Modeling
View job
Mechanical Drawings and Footprints for Connectors
Remote - Posted
We're looking for someone to generate 3D/2D mechanical drawings for 35 of our connector parts from existing SolidWorks models, along with PCB footprints, for use in our produc...
Mechanical Drawing Services
3D Design Services
3D Modeling
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
210,296
global members
33,383
projects delivered to clients
Trusted by
