Remote
Work location
Mechanical designer needed for industrial washdown weighing scale (full fabrication package) Ended
About the job
We are a scale manufacturing startup building an industrial washdown weighing scale for fruit/vegetable packing houses, and we need a mechanical designer to produce a complete, manufacturing-ready design.
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including... read more
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including... read more
We are a scale manufacturing startup building an industrial washdown weighing scale for fruit/vegetable packing houses, and we need a mechanical designer to produce a complete, manufacturing-ready design.
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including off-the-shelf components (load cell, glands, fasteners, display)
- 2–3 photorealistic renders
- Reasonable revision rounds until fabrication-ready
IDEAL DESIGNER
Experience with stainless sheet-metal design, food-industry/hygienic equipment, and IP-rated enclosures.
BUDGET
Open — please quote with your proposal, portfolio of similar work, and estimated timeline. read less
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including off-the-shelf components (load cell, glands, fasteners, display)
- 2–3 photorealistic renders
- Reasonable revision rounds until fabrication-ready
IDEAL DESIGNER
Experience with stainless sheet-metal design, food-industry/hygienic equipment, and IP-rated enclosures.
BUDGET
Open — please quote with your proposal, portfolio of similar work, and estimated timeline. read less
We are a scale manufacturing startup building an industrial washdown weighing scale for fruit/vegetable packing houses, and we need a mechanical designer to produce a complete, manufacturing-ready design.
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design mu... read more
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design mu... read more
We are a scale manufacturing startup building an industrial washdown weighing scale for fruit/vegetable packing houses, and we need a mechanical designer to produce a complete, manufacturing-ready design.
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including off-the-shelf components (load cell, glands, fasteners, display)
- 2–3 photorealistic renders
- Reasonable revision rounds until fabrication-ready
IDEAL DESIGNER
Experience with stainless sheet-metal design, food-industry/hygienic equipment, and IP-rated enclosures.
BUDGET
Open — please quote with your proposal, portfolio of similar work, and estimated timeline. read less
REFERENCE / INSPIRATION
TopControl IWS2000 (https://www.topcontrol.it/en/product/weighing-scale-iws2000/) — see attached screenshot. Use it for form factor and ergonomics only — the design must be your original work, not a copy.
SCOPE OF WORK
1. Terminal enclosure — stainless steel (304/316), sealed to IP69K washdown standard, housing a touch display (~7–10"), controller board, and an LED traffic-light indicator strip (red/yellow/green). Hygienic design: sloped/rounded surfaces, no water traps, welded seams where possible.
2. Weighing platform assembly — stainless steel platter in two sizes (300×400 mm and 200×300 mm), mounted on a single-point load cell (off-the-shelf, e.g. 15/30 kg), with sealed load cell housing and overload protection.
3. Stand/column — stainless tube stand connecting platform base and terminal, in 2–3 height variants (bench and floor), with cable routing internal to the column and IP-rated cable glands.
4. Design for fabrication in a standard sheet-metal workshop (laser cut + bend + TIG weld); prefer off-the-shelf hardware.
DELIVERABLES
- Full 3D CAD — native SolidWorks (or agreed equivalent) + STEP
- 2D manufacturing drawings with tolerances (PDF + DWG)
- Sheet-metal flat patterns (DXF) ready for laser cutting
- Complete BOM including off-the-shelf components (load cell, glands, fasteners, display)
- 2–3 photorealistic renders
- Reasonable revision rounds until fabrication-ready
IDEAL DESIGNER
Experience with stainless sheet-metal design, food-industry/hygienic equipment, and IP-rated enclosures.
BUDGET
Open — please quote with your proposal, portfolio of similar work, and estimated timeline. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
1-3 months
Job duration
Areas of expertise
3D CAD Modeling
IP Rated Enclosure Design
Product Design
Sheet Metal Design
SolidWorks
+2 more
Job categories
Mechanical Design Services
Sheet Metal Design
Fabrication Drawings Services
About the client
Payment not ready
Egypt (12:58 am)
Posted
Active
Job activity
44 Applicants
0 interviews in progress
1 unanswered invites
Similar jobs
Industrial or Mechanical Designer needed for Haunted House Advent Calendar Design and Prototype
Remote - Posted
Hi there!
I'm looking for an experienced mechanical or product designer to help transform a series of concept images into a fully developed, manufacturable 3D design for a...
Mechanical Design Services
Industrial Design Services
3D Architectural Modeling
Prototype Design Services
Product Engineering Services
View job
Lightsport aircraft
Remote - Posted
PROJECT TITLE:
CAD Engineering Specialist Required: 600kg Microlight Adaptation of Ercoupe 415-C/D Blueprints
PROJECT OVERVIEW:
I am scratch-building a modern 3-axis microl...
CAD Conversion Services
Aerospace Engineering
Mechanical Design Services
Design Engineering Services
View job
Designer for manufacturing unit
Remote - Posted
Design for pump agigator and pretreatment skid need 2d and 3d design in solid work and autocad
Mechanical Design Services
Product Engineering Services
3D Design Services
View job
Production engineering services for facade projects
Remote - Posted
• Prepare production drawings and technical documentation.
• Develop technical specifications for the purchasing team.
• Create and manage parametric 3D models using Autodes...
Fabrication Drawings Services
3D Design Services
3D Modeling
View job
Mechanical Design Engineer (CAD + DFM) — Shenzhen on-site, ASAP
Shenzhen, China - Posted
We’re Voyage (voyage.inc), building a non-invasive silent-speech wearable in Shenzhen. Looking for a mechanical / structural design engineer who can own enclosure CAD, DFM wit...
3D CAD Translation Services
CAD Drafting Services
Mechanical CAD Design
Mechanical Design Services
Mechanical Engineering
View job
Mechanical Product Designer - Outdoor Display Enclosure redesign
Remote - Posted
Our outdoor enclosure is (about 2.9 m x 1.1 m). We already have a complete design (STEP, PDF and DXF, about 29 parts) and now need it re-engineered for cost-effective producti...
Industrial Design Services
Mechanical Design Services
Product Engineering Services
3D Modeling
Electronic Enclosures Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
216,266
global members
33,565
projects delivered to clients
Trusted by
