Remote
Work location
Engineering Support Needed for Telecom/Water Tower Ended
About the job
Structural Engineering Request - Telecommunications Water Tower Concealment Structure
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel struc... read more
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel struc... read more
Structural Engineering Request - Telecommunications Water Tower Concealment Structure
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel structure, so we would like to work closely with the engineer to make sure the final design is practical to manufacture, galvanize, transport, and assemble in the field.
The attached drawings are reference drawings only. We are not expecting the existing member sizes, connections, or dimensions to be treated as engineered values. We would like the general appearance and layout to be used as a starting point, with the structure properly engineered from there.
If this type of project is within your area of expertise, could you please provide us with a rough engineering cost range, estimated timeline, and a brief description of what would be included in your scope? Please also let us know what additional information you would need from us in order to prepare a formal proposal.
Thank you, and I look forward to hearing from you.
Best,
Ryan Keogan GodSpeed Engineering read less
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel structure, so we would like to work closely with the engineer to make sure the final design is practical to manufacture, galvanize, transport, and assemble in the field.
The attached drawings are reference drawings only. We are not expecting the existing member sizes, connections, or dimensions to be treated as engineered values. We would like the general appearance and layout to be used as a starting point, with the structure properly engineered from there.
If this type of project is within your area of expertise, could you please provide us with a rough engineering cost range, estimated timeline, and a brief description of what would be included in your scope? Please also let us know what additional information you would need from us in order to prepare a formal proposal.
Thank you, and I look forward to hearing from you.
Best,
Ryan Keogan GodSpeed Engineering read less
Structural Engineering Request - Telecommunications Water Tower Concealment Structure
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water t... read more
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water t... read more
Structural Engineering Request - Telecommunications Water Tower Concealment Structure
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel structure, so we would like to work closely with the engineer to make sure the final design is practical to manufacture, galvanize, transport, and assemble in the field.
The attached drawings are reference drawings only. We are not expecting the existing member sizes, connections, or dimensions to be treated as engineered values. We would like the general appearance and layout to be used as a starting point, with the structure properly engineered from there.
If this type of project is within your area of expertise, could you please provide us with a rough engineering cost range, estimated timeline, and a brief description of what would be included in your scope? Please also let us know what additional information you would need from us in order to prepare a formal proposal.
Thank you, and I look forward to hearing from you.
Best,
Ryan Keogan GodSpeed Engineering read less
My name is Ryan Keogan with GodSpeed Engineering. I’m reaching out regarding a telecommunications concealment structure we are looking to engineer and fabricate.
I’ve attached a couple of rough reference drawings showing the general concept and geometry. Although the structure is designed to look like a water tower, it is not an actual water storage tank. The structure is strictly for telecommunications equipment and antenna concealment.
The concept consists of a galvanized structural steel support tower, including the tower legs, bracing, platforms/landings, and a large steel center tube/column running vertically through the structure. The upper enclosure surrounding the antennas would primarily utilize fiberglass/FRP components so the telecommunications equipment can operate through the concealment material.
We are looking for a structural engineer who can help take these rough drawings and develop a complete engineered design that can ultimately be fabricated and installed.
At this stage, we would first like to get a rough estimate of the engineering cost based on the attached concept drawings. We understand additional information may be required before a firm proposal can be provided, but an estimated range would help us with project planning and budgeting.
The anticipated engineering scope would include:
GodSpeed Engineering would be involved in the fabrication of the steel structure, so we would like to work closely with the engineer to make sure the final design is practical to manufacture, galvanize, transport, and assemble in the field.
The attached drawings are reference drawings only. We are not expecting the existing member sizes, connections, or dimensions to be treated as engineered values. We would like the general appearance and layout to be used as a starting point, with the structure properly engineered from there.
If this type of project is within your area of expertise, could you please provide us with a rough engineering cost range, estimated timeline, and a brief description of what would be included in your scope? Please also let us know what additional information you would need from us in order to prepare a formal proposal.
Thank you, and I look forward to hearing from you.
Best,
Ryan Keogan GodSpeed Engineering read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Structural Modelling
Autodesk Advance Steel
Autodesk Advance Steel
Bill of Materials (BOM)
Construction Drawings
Engineering Analysis
Fabrication Drawings
Industrial Structure Design
Structural Engineering
Structural Engineering Design
+7 more
Job categories
Structural Engineering
3D Design Services
3D Modeling
About the client
Payment not ready
United States (02:37 am)
Posted
Active
Job activity
28 Applicants
0 interviews in progress
1 unanswered invites
Similar jobs
Site Survey
Remote - Posted
Need to convert survey report to autocad version. We have attached site survey report in Zip file.
Architectural Planning and Design
Design & Drafting
3D Design Services
View job
Admetec Orchid Camera Support — Final Redesign
Remote - Posted
he goal of this project is to finalize the camera support for my Admetec Orchid loupe light, based on the functional prototype developed in the previous project.
The new de...
3D Printing Design
3D Design Services
3D Modeling
View job
Data Processor
United States - Posted
Most of our work is power industry related but we do some commercial and civil work. Looking to add a full time member to our team who is interested in a high growth opportuni...
Point Cloud Modeling Services
3D Design Services
3D Modeling
View job
Tile Project Design for Artist
Remote - Posted
Hi there,
We are in search of a designer who can help us develop a custom piece based on the references provided, while incorporating our branding into the overall design....
2D CAD Design Services
3D CAD Translation Services
3D Design Services
View job
VIP3D / Pool Studio Designer Needed for Ongoing Florida Pool Projects
Remote - Posted
South Shore Pools & Luxury Outdoors is a Florida swimming pool construction company looking for an experienced Structure Studios VIP3D / Pool Studio designer for ongoing resid...
Swimming Pool Design
3D Rendering Services
3D Design Services
3D Architectural Rendering Services
View job
Custom Memorial Ring – Production-Ready Jewelry CAD with 3D Relief
Remote - Posted
I am looking for an experienced jewelry CAD designer / 3D sculptor to create a production-ready 3D model of a custom memorial ring.
The ring will be 3D printed in castable...
3D Modeling
3D Sculpting Design
Jewelry Design
Jewelry Design
3D Jewelry Rendering
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
213,900
global members
33,462
projects delivered to clients
Trusted by
