Hire the best Procore experts for your company

Interiors | Architecture | Architectural Modeling Graduate student at Illinois Institute of Technology, College of Architecture with over four years of professional experience throughout the entire p... Read more

Interiors | Architecture | Architectural Modeling Graduate student at Illinois Institute of Technology, College of Architecture with over four years of professional experience throughout the entire project lifecycle. Capable in all firm standard software.

I’m Tobi, a Master’s student in Architecture complementing my academic journey with real-world experience in design documentation and architectural drafting. My path into collaboration on projects b... Read more

I’m Tobi, a Master’s student in Architecture complementing my academic journey with real-world experience in design documentation and architectural drafting. My path into collaboration on projects began during my undergraduate years starting with small freelance drafting tasks that gradually grew into assisting on full architectural and structural documentation for U.S. based contracting firms, project managers, and licensed professionals. It was a process of steady learning: studying building codes, observing construction workflows, watching field documentation videos, and refining my drafting approach through countless iterations and feedback loops, I had learned to adapt across diverse project standards and expectations. My approach bridges design thinking with the precision required in technical documentation, guided by clarity and a respect for both local practice and global standards, while remaining grounded in the shared discipline and professional ethics that connect designers everywhere. Core Skills: Revit | AutoCAD | Bluebeam | Architectural Drafting | Construction Documentation | Permit Drawing Sets | Coordination | Detail Development | BIM Workflow

I am an architect who works professionally and effectively in teams. I am motivated by solving challenges and am proactive, using my knowledge and experience to make decisions for coordinating urban a... Read more

I am an architect who works professionally and effectively in teams. I am motivated by solving challenges and am proactive, using my knowledge and experience to make decisions for coordinating urban and architectural projects, ensuring high levels of response. I have experience leading design teams and managing executive projects. I enjoy collaborating with others and am passionate about conceptual design and architectural visualization.

BIM Consultant and ISO 19650 Expert Level 3 Information Manager with active experience in Revit Architecture, AutoCAD, and construction cost estimating. I deliver architectural floor plans, 3D BIM mod... Read more

BIM Consultant and ISO 19650 Expert Level 3 Information Manager with active experience in Revit Architecture, AutoCAD, and construction cost estimating. I deliver architectural floor plans, 3D BIM models, elevation drawings, and Bills of Quantities for residential and commercial projects. Currently serving as Assistant Clerk of Works at the Ministry of Labour, Government of Guyana, and operating Bishop Enterprises Ltd., a BIM consulting and digital drafting firm. My credentials include Plannerly Certified Information Manager (Levels 1, 2, and 3 Expert), Autodesk Certified Professional in Revit Architecture, Procore Certified Engineer and Architect, and a Construction Cost Estimating certification from Columbia University via Coursera. I work to ISO 19650 standards and deliver precise, well-documented outputs on time. Available for remote BIM modelling, 2D CAD drafting, BOQ preparation, and information management consulting at $25-40/hr. All deliverables are production-ready and client-ready on first submission.

As a licensed and professional architect, I possess comprehensive architectural knowledge in planning, designing, and drafting basic and complex structures and visualizing them through BIM. In additio... Read more

As a licensed and professional architect, I possess comprehensive architectural knowledge in planning, designing, and drafting basic and complex structures and visualizing them through BIM. In addition, I am knowledgeable in the following programs: Autodesk Revit, Navisworks, AutoCAD, SketchUp, Lumion, Enscape, Adobe Photoshop, Premiere, Microsoft Office, Envision, Procore, Asana, Trello, and ClickUp. Here is the link to my architectural portfolio: https://jasperrizon.wixsite.com/rizon-architectural

Pool and outdoor living designer with experience in CAD drafting, 3D renderings, and permit-ready plans. Background in construction estimating and project management, with a track record of delivering... Read more

Pool and outdoor living designer with experience in CAD drafting, 3D renderings, and permit-ready plans. Background in construction estimating and project management, with a track record of delivering accurate, buildable designs from concept to approval.

Electrical & Fire Protection Designer with 15+ years of experience in NFPA‑compliant fire alarm systems, electrical installation, panel assembly, and AutoCAD drafting. Currently transitioning into BIM... Read more

Electrical & Fire Protection Designer with 15+ years of experience in NFPA‑compliant fire alarm systems, electrical installation, panel assembly, and AutoCAD drafting. Currently transitioning into BIM MEP modeling and applying extensive field experience to produce accurate, constructible Revit models aligned with real‑world installation practices.

Well-rounded architect with 6+ years of diversified experience in residential, commercial, mixed-use, civic, and MEPFS design. Skilled in architectural design, drafting, 3D visualization, estimates,... Read more

Well-rounded architect with 6+ years of diversified experience in residential, commercial, mixed-use, civic, and MEPFS design. Skilled in architectural design, drafting, 3D visualization, estimates, and project management. Experienced in all project stages—from design to implementation. Proven ability to lead teams, collaborate, and manage multiple projects both onsite and remotely while ensuring compliance with functionality, budgets, and timelines.

I'm a professional CAD drafter whom has experience in the construction field. I have got my hands in the construction field as working as a laborer. Experienced in 3D and 2D drafting.

I'm a professional CAD drafter whom has experience in the construction field. I have got my hands in the construction field as working as a laborer. Experienced in 3D and 2D drafting.

Architect and construction professional with 13+ years of international experience in commercial millwork, project coordination, and building supervision. Proficient in managing shop drawings, submitt... Read more

Architect and construction professional with 13+ years of international experience in commercial millwork, project coordination, and building supervision. Proficient in managing shop drawings, submittals, RFIs, and change orders from kickoff to final installation. Skilled in AutoCAD, Bluebeam, Procore, and Microvellum

* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plum... Read more

* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plumbing Design * Leadership and Mentorship * Mechanical Engineering. * Staff Training & Development. *NAVISWORKS for 3D coordination. * EVOLVE. * Autodesk ACC * FIM: MAINSAVER, ARCHIBUS, MCLAREN. * PROCORE.

I am passionate about building 2D & 3D designs with the use of CAD softwares such as AutoCAD, Revit, Solid works. I enjoy trying to utilise my knowledge of civil engineering as my background study t... Read more

I am passionate about building 2D & 3D designs with the use of CAD softwares such as AutoCAD, Revit, Solid works. I enjoy trying to utilise my knowledge of civil engineering as my background study to build 2D and 3D designs of all sorts. I am working with a fabrication company here where I have spearheaded projects ranging from commercial to residential, with the use of Revit, AutoCAD and other bim resources such as viewpoint, aconex, procore.

As a recent graduate with a Bachelor's degree in Architecture from Keene State College, my transition into the education sector at Blue Hills Regional Vocational Technical has been marked by a commitm... Read more

As a recent graduate with a Bachelor's degree in Architecture from Keene State College, my transition into the education sector at Blue Hills Regional Vocational Technical has been marked by a commitment to nurturing the next generation of design professionals. Our team's dedication to excellence is reflected in the provision of personalized instruction and the successful management of dynamic classroom settings. With a solid foundation in architecture and certified skills in Procore project management, my prior role as Assistant Project Manager at Youngblood Builders capitalized on my CAD proficiency and problem-solving acumen. There, in collaboration with a diverse team, we facilitated small-scale renovation projects that demonstrate our collective commitment to quality and efficiency.

I'm a Registered Architect (RA) with a Bachelor of Architecture degree from NYIT, recognized with the AIA Medal for Academic Excellence. I offer architectural consultation and drafting services, spec... Read more

I'm a Registered Architect (RA) with a Bachelor of Architecture degree from NYIT, recognized with the AIA Medal for Academic Excellence. I offer architectural consultation and drafting services, specializing in leading projects from conception through Construction Documents (CDs) and Construction Administration (CA). My experience spans single and multi-family residential, small and large-scale commercial/retail fit-outs and historical projects. Drafting Expertise: Highly proficient in Revit (BIM), AutoCAD Architecture, and Rhino 3D. Project Management: Skilled in managing projects with major stakeholders, including developers. I am experienced in project scheduling, team leadership, and Construction Administration (CA) using tools like Procore and BlueBeam. Quality Control: My drawings have been adopted as the standard for quality within a previous firm. I look forward to leveraging my technical proficiency and project leadership skills for your next project.

Civil 3D drafter and design engineer with 2+ years of hands-on experience across 200+ residential, commercial, and infrastructure projects in South Florida. I specialize in site design, grading and dr... Read more

Civil 3D drafter and design engineer with 2+ years of hands-on experience across 200+ residential, commercial, and infrastructure projects in South Florida. I specialize in site design, grading and drainage, and water/sewer/stormwater utility layouts, taking projects from conceptual design through full permitting and into active construction. I've advanced 100+ residential lots through regulatory approval, produced grading, drainage, and roadway alignment plans, and built shapefiles for ArcGIS to support spatial data and infrastructure mapping. I also have experience drafting specialty projects, including full construction plans for athletic field grading and drainage design. I hold a BS in Engineering Technology (Minor: Electrical Engineering) and an MBA, and I'm currently preparing for the FE Civil Exam. Proficient in AutoCAD Civil 3D, Bluebeam, Procore, and ArcGIS, I bring both technical precision and reliable project delivery to every job.

Technical aptitude with strong Quantitative skills. Proficient in CAD and Simulation softwares. Ability to draft and review estimates. Great communication skills and ability to work in a team. Detail-... Read more

Technical aptitude with strong Quantitative skills. Proficient in CAD and Simulation softwares. Ability to draft and review estimates. Great communication skills and ability to work in a team. Detail-oriented to ensure compliance.

I've worked with >100 individual inventors & startups developing totally novel ideas into products. These are some successful startups I've been involved with directly as a designer / project manager:... Read more

I've worked with >100 individual inventors & startups developing totally novel ideas into products. These are some successful startups I've been involved with directly as a designer / project manager: | Neato - Tool management system | | Waveblade - Sports massage tool | | Phonesoap - UV phone sanitizer | | Virtuix Omni - Simulator for VR games | | Roll Recovery - Sports accessories | | Krevare - Home & hygiene products |

I help turn ambitious ideas into exceptional, real-world products. My focus is simple: take your idea from concept to awesome design, specialised engineering, production-level prototyping, DFM/DFA, a... Read more

I help turn ambitious ideas into exceptional, real-world products. My focus is simple: take your idea from concept to awesome design, specialised engineering, production-level prototyping, DFM/DFA, and manufacturing, smoothly and efficiently. With 15+ years of experience across industrial design, product development, automotive design, mechanical engineering, prototyping, and manufacturing, I bring together creative thinking and practical engineering to develop products that are not only visually impressive, but also functional, reliable, manufacturable, and commercially viable. I lead a multidisciplinary design studio based in Bombay, India, with a team of 8 designers and engineers. Our combined expertise allows us to manage the complete product journey under one roof, from early concept exploration and industrial design to detailed CAD, engineering, physical prototypes, testing, manufacturing documentation, and production support. We believe great products are created when design and engineering work together from day one. From Idea to Manufacturing Our process is structured to reduce delays, avoid costly redesigns, and move quickly from imagination to reality: Concept Strategy → Industrial Design → Ergonomics → Specialised Engineering → Detailed CAD → Simulation → Production-Level Prototype → Testing → DFM/DFA → Manufacturing We consider materials, mechanisms, user interaction, tolerances, assembly, serviceability, tooling, cost, and manufacturing feasibility throughout the process, rather than treating them as problems to solve at the end. Multidisciplinary Experience Our work covers a wide range of industries and product categories, including: - Industrial and consumer products - Automotive, EV, motorcycle, and mobility design - Drones, UAVs, VTOL, and specialty vehicles - Mechanical systems, mechanisms, and automation - Medical equipment and healthcare products - Wearables, smart devices, and electronics - Furniture, interiors, and commercial spaces - Injection-moulded plastics, silicone, sheet metal, CNC, and 3D printing - Product visualisation, photorealistic rendering, and animation Selected Projects I designed and engineered an electric motorcycle for Tork Motors, working across concept development, vehicle design, packaging, engineering, and production considerations. For Probot, I designed a palletising robot arm that was very well received by the client. This project combined industrial design, mechanical movement, functional packaging, and engineering into a practical automation product. I have worked on sports cars, luxury vehicles, EVs, motorcycles, and automotive components, including an electric sports car project for the UAE. My automotive experience includes exterior and interior design, Class-A surfacing, mechanical packaging, component development, and manufacturing feasibility. I have also worked on racing FPV drones, VTOL concepts, and defence-related UAV projects, requiring lightweight structures, component integration, mechanisms, and practical engineering solutions. In the healthcare sector, I designed a mobile clinic bus for Medanta Hospitals, integrating multiple clinical functions, medical equipment, HVAC, lighting, electrical systems, storage, patient movement, and weight distribution into an 11-metre vehicle. The project later led to another rural mammography van development. My product development experience also includes medical devices, fitness wearables, smart products, consumer goods, furniture, premium lifestyle products, electronic enclosures, and complex mixed-material assemblies. Why Work With Us? You are not just hiring a designer. You are partnering with a multidisciplinary team that understands how to move a product from an early idea to something that can be built, tested, improved, and manufactured. We combine: - Creative industrial design - Strong mechanical engineering - Automotive and product development experience - Rapid prototyping and physical validation - Manufacturing-focused CAD and documentation - DFM/DFA and cost-conscious decision-making - Clear communication and efficient project execution Whether you are developing an automotive product, industrial machine, drone, consumer device, medical product, furniture piece, or something completely new, we can help you take it forward with confidence. Your idea deserves more than a beautiful concept. It deserves a clear path to becoming a successful product. That is what we specialise in: great design, specialised engineering, real prototypes, and a smooth journey to manufacturing.

I am mechanical engineer having 10 years experience in CAD/CAM, product development and working with design outsourced projects with local and international clients.

I am mechanical engineer having 10 years experience in CAD/CAM, product development and working with design outsourced projects with local and international clients.

Dive into easy-to-follow CAD modeling tutorials for automotive parts using Siemens NX. Perfect for beginners and professionals looking to master 3D design. Follow us on Instagram and subscribe on you... Read more

Dive into easy-to-follow CAD modeling tutorials for automotive parts using Siemens NX. Perfect for beginners and professionals looking to master 3D design. Follow us on Instagram and subscribe on you tube for more information, detailed video and latest update!

3D Visualization Artist I'm Juan Ledezma. I'm a Venezuelan 3D Generalist based in Hamburg, Germany. I have been working in the creative area since 2012, and in the last years I have been worki... Read more

3D Visualization Artist I'm Juan Ledezma. I'm a Venezuelan 3D Generalist based in Hamburg, Germany. I have been working in the creative area since 2012, and in the last years I have been working with 3D Architecture Visualization. I have a relatively broad set of skills within the realm of 3D and Motion Design including: -Environment Development -Conceptual Art -Texture, shader and material creation -Lighting and rendering using V-Ray and Octane -Several years of experience with Cinema 4D -Medium knowledge of SideFX's Houdini -Strong Knowledge of composition and post production techniques with After Affects -Vast experience with Adobe Photoshop for both 3D texture and Post Production needs. -Creation of 2D Graphics (Vectors and Bitmaps) for 3D Environments. -Interpretation of object references and transformed them into On-model objects -Created mockups of projects as preliminary visual examples of the final product -Reading and Interpretation of Architectural Plans. I can provide you with 3D visualization services or with any other task where my skills and expertise might be required. Feel free to contact me for any inquiry. I speak English, Spanish and German.

• Designing functional mechanical products for the real world • Proof of Concept, Prototyping, Minimum Viable Product design • Feasibility study, usability testing, delivering minimum value with optim... Read more

• Designing functional mechanical products for the real world • Proof of Concept, Prototyping, Minimum Viable Product design • Feasibility study, usability testing, delivering minimum value with optimal time to market Mechanical Design Engineer with ten years of experience developing and optimizing mechanical components and systems. Proven ability to rapidly transform concepts into market-ready products, meeting functional and aesthetic requirements. Expertise in R&D and product design for Startups in Healthcare, Sports, Education and other industries. A collaborative cross-functional team player with a proven track record of successful cooperation, committed to continuously improving my technical and project management skills. My services • Ideation and Concept design • Visualization and Rendering • 3D Modeling and CAD • Mechanical design and Strength analysis • Design for Manufacturing and Drafting • Design for Prototyping and 3d printing • Reverse Engineering My clients are ScaffFloat, EquipFIT, LearnwithMochi, GoodDog.ai, Pendex Company, Volmo Medical, Strawbit and more.

senior mechanical engineering professional with 17 years of experience in design development, new product development, project management in SPM, Material handling, Vacuum technology & food processing... Read more

senior mechanical engineering professional with 17 years of experience in design development, new product development, project management in SPM, Material handling, Vacuum technology & food processing industries.

I am an Aerospace Engineering student at NUST with a strong interest in design and problem-solving. My skills include CAD modeling, 3D design, and drafting using Fusion 360, and CATIA V5. I have exper... Read more

I am an Aerospace Engineering student at NUST with a strong interest in design and problem-solving. My skills include CAD modeling, 3D design, and drafting using Fusion 360, and CATIA V5. I have experience working on mechanical parts, assemblies, and product designs that are accurate, practical, and ready for manufacturing or 3D printing. I aim to combine creativity with engineering knowledge to deliver reliable and high-quality results. Clear communication, attention to detail, and meeting deadlines are values I prioritize in every project.