Hire the best freelance GPS Surveying Survey expert designers for your company

I am a Civil 3D and CAD specialist with over 22 years of experience in topographic mapping, digital terrain modeling, and civil infrastructure documentation. My career spans full-cycle geodetic suppor... Read more

I am a Civil 3D and CAD specialist with over 22 years of experience in topographic mapping, digital terrain modeling, and civil infrastructure documentation. My career spans full-cycle geodetic support — from field surveys and construction control to final CAD deliverables. My core expertise includes: Topographic mapping and digital terrain modeling (DTM/TIN) in Civil 3D Earthwork volume calculations and grading design Longitudinal profiles, cross-sections, and infrastructure documentation Survey data processing from total stations (Leica TS02, TS06) and GPS/RTK equipment *3D modeling and design in AutoCAD and Fusion 360* I have extensive experience in construction quality control and compliance verification (SP, SNiP, GOST standards), as well as developing geodetic work plans (PPGR) and deformation monitoring programs for buildings and foundations. In addition to Civil 3D, I work with AutoCAD (2D/3D) and Fusion 360 for 3D modeling, including 3D printing of topographic models and landscape design projects. I combine field survey expertise with advanced office-based skills, allowing me to deliver accurate, construction-ready deliverables. I am comfortable working remotely and maintaining clear communication with engineering teams. I am looking for remote freelance opportunities where I can support infrastructure and construction projects with reliable Civil 3D and surveying services.

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data... Read more

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data processing, and technical drawing preparation. Skilled in AutoCAD, QGIS, Civil 3D, and parametric 3D modeling workflows for engineering and mapping projects. Worked as a Surveyor II and GIS Analyst at Apex Survey Services, contributing to land administration and geospatial projects. Capable of producing accurate 2D drawings, site plans, coordinate plotting, contour maps, and professional CAD documentation. Focused on detail, accuracy, and delivering clean, high-quality work on time.

Civil/survey engineer with hands-on experience in canal, drainage, and road infrastructure projects across Andhra Pradesh and Telangana, India. I specialize in converting field survey data and hand-dr... Read more

Civil/survey engineer with hands-on experience in canal, drainage, and road infrastructure projects across Andhra Pradesh and Telangana, India. I specialize in converting field survey data and hand-drawn sketches into precise, true-scale AutoCAD drawings — road and canal longitudinal sections, cross-sections, key/junction plans, and chainage-based layouts — along with the quantity take-offs and BOQ workbooks in Excel that go alongside them. My work covers the full pipeline: reading raw field data and rough site sketches, producing properly presented DXF/AutoCAD drawings with accurate chainages, dimension tables, and scale bars, and building the earthwork/quantity calculations clients need for estimation and tendering. I work carefully and iteratively — matching drawings exactly to the source data and refining details until every measurement checks out. Comfortable with AutoCAD, Civil 3D-style chainage/cross-section work, and Excel-based quantity surveying. Available for L-section, cross-section, canal/road drafting, and quantity take-off work, from raw sketches or survey data through to a finished, client-ready drawing.

I’m a Survey CAD Technician with 13+ years of experience in surveying, CAD drafting, and survey data processing. I specialize in AutoCAD and Civil 3D, with experience in Carlson, point cloud drafting... Read more

I’m a Survey CAD Technician with 13+ years of experience in surveying, CAD drafting, and survey data processing. I specialize in AutoCAD and Civil 3D, with experience in Carlson, point cloud drafting, and survey data processing. I have worked on US, Australian, and local survey projects, including boundary, topographic, as-built, and point cloud drafting. I’m detail-oriented, reliable, and adaptable, and I can work independently or as part of a team. I’m always willing to learn new workflows and software to meet project requirements. If you need a reliable Survey CAD Technician for your project, I’d be happy to help.

12 Years experience in land surveying planning and mapping, I Will Draw Survey Plans & subdivisions a survey Plans (GPS/GIS Data/Arc GIS/QGIS /Total Station/Field Notes) Site Plans True copy's Contour... Read more

12 Years experience in land surveying planning and mapping, I Will Draw Survey Plans & subdivisions a survey Plans (GPS/GIS Data/Arc GIS/QGIS /Total Station/Field Notes) Site Plans True copy's Contour plans with or without spot heights Site Plans, Property Plans using Google Maps Extent Calculating According to the GPS/GNSS/SDR/CSV/Fieldnotes/old plans/PDF or any data you provide

I am a senior land surveyor with more than 25 years of experience in construction and infrastructure projects across the UAE and Egypt. I have worked on villa developments, commercial buildings, gove... Read more

I am a senior land surveyor with more than 25 years of experience in construction and infrastructure projects across the UAE and Egypt. I have worked on villa developments, commercial buildings, government facilities, water treatment projects, malls, parks, mosques, and large construction sites. My experience includes: * Construction surveying * Site layout and setting out * Topographic surveying * As-built drawings * Survey calculations * AutoCAD drafting * Survey data interpretation * Coordination with engineers and contractors I have experience using Leica, Topcon, Sokkia, Nikon, and Trimble GPS surveying equipment. I focus on accuracy, clear communication, and delivering reliable work on time. Available for remote support services including: * AutoCAD drafting * Survey data processing * Quantity calculations * Site documentation * PDF to CAD conversion * Construction coordination support * Technical reports * As-built drawings

NAME: MD AMRAN HOSSAIN (SHOAIB) Mobile: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Digital Survey Drafting  DRAFTSMAN:  CADASTRAL SURVEY – GEOLOGIACL SURVEY  LAND SURVEY DRAFTING ASSISTANT SURVEY ENGINEER SI... Read more

NAME: MD AMRAN HOSSAIN (SHOAIB) Mobile: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Digital Survey Drafting  DRAFTSMAN:  CADASTRAL SURVEY – GEOLOGIACL SURVEY  LAND SURVEY DRAFTING ASSISTANT SURVEY ENGINEER SITE VISIT AS JUNIOR SURVEY ENGINEER Present Working Status: Global Surveying Systems- GSS (GRADE-A) P.O Box: 55535 Doha, State of Qatar Since March 2018 Working as SENIOR DRAFTSMAN. WORKING EXPERINCE WITH – MNISTRY OF QATAR SURVEY DEPARTMENT. Strong computer skills; proving ability to use Standard and Customized technology packages, such as Operational Knowledge of MS Word, MS Excel, Email, Leica Geo office, Lis Cad, Leica construction manager Golden Surfer, AutoCAD (Digital Survey Drafting) Photoshop. 1. Re-Demarcation Survey 2. Demarcation Survey 3. Sub-Division / NEW PLAN PROPOSAL 4. Consolidation Survey 5. Road level Survey 6. Gate level Survey 7. Topographic Survey 8. Contour Map making 9. Construction Data Alignment Survey 10. Level cut fill counting 11. Architecture Drawing (limited) 12. Various other experienced Land survey work 13. Stakeout Work Survey 14. Mapping for new Plot Area Survey 15. Column Footings marking Survey 16. Site Coordinated Alignment 17. Helping arrange drawing 18. Helping surveyor 19. Making MME Report Construction Survey As-built Survey Topographical Survey Utility Survey Cadastral survey TOPOGRAPHIC SURVEYS STATIC SURVEY CONTOUR SURVEY ROUTES / ROAD SURVEYS & DESIGN GRID SURVEYING SETTING OUT GPS CONTROL SURVEY CONSTRUCTION STAKING PIPELINE SURVEYS POWERLINE SURVEYS SITE DEVELOPMENT SITE INVESTIGATION SURVEYS AS BUILT SURVEY CAD SERVICE

I have 5 years of project management experience, 20+ years in the civil engineering, surveying, GIS and construction fields. I have an Associates' degree in Surveying w/GIS option from Kansas State Un... Read more

I have 5 years of project management experience, 20+ years in the civil engineering, surveying, GIS and construction fields. I have an Associates' degree in Surveying w/GIS option from Kansas State University. I have been working with all brands and accuracy levels of GPS since the early 90s. In the 10 years working for the City of Salina, Ks. Engineering department as Utility Coordinator, I developed a program to survey and geo-reference all of the City's utilities, street conditions (OCI), and signage. This was done using GPS/GIS.; primarily ArcInfo/view, and Acad Map and various GPS equipment and other software. Data was researched, compiled and finally populated, from many different sources. I have a great amount of experience acquiring, converting, and compiling data that always seems to come in multiple formats, and accuracy levels. I have several years of experience completing surveys and building existing surface models from them.

I am a Surveying and Road Design Engineer with over 13 years of practical experience in topographic surveying, road design, Civil 3D, and GIS. I help engineering consultants, contractors, surveyors,... Read more

I am a Surveying and Road Design Engineer with over 13 years of practical experience in topographic surveying, road design, Civil 3D, and GIS. I help engineering consultants, contractors, surveyors, and researchers convert raw survey and spatial data into accurate, well-organized engineering deliverables. My services include: • Civil 3D surface creation from survey points • Road alignments and vertical profiles • Corridor modeling and cross-section production • Cut and fill earthwork quantity calculations • Topographic plans and contour maps • ArcGIS Pro mapping and spatial analysis • Watershed, terrain, and suitability analysis • GPS, CAD, KML, SHP, CSV, and geodatabase processing • Georeferencing and map digitization Software and equipment: Autodesk Civil 3D, AutoCAD, ArcGIS Pro, Total Station, GNSS/RTK, and Auto Level. Deliverables may include DWG, PDF, LandXML, SHP, KML, GeoPackage, Excel reports, and high-resolution map layouts. Please send your project requirements, coordinate system, input data, and required deliverables before starting.

A.S. in Drafting and Design AutoCAD Certified B.S. Architectural Engineering in progress Years of hands-on experience in Construction, Engineering Design, and Project Coordination. Effective visual a... Read more

A.S. in Drafting and Design AutoCAD Certified B.S. Architectural Engineering in progress Years of hands-on experience in Construction, Engineering Design, and Project Coordination. Effective visual and verbal communication skills. Skilled in consolidating and managing design data. Advanced Skills: -AutoCAD -Revit -Civil 3D -MIcrosoft Office -GPS Surveying Professional Capability: -Architectural Design -Electrical Plans -HVAC Plans -Survey Site Plans -3D Models -3D Renderings -Product Design -Project Planning & Management

I am an experienced Land Surveyor and GIS & UAV Mapping Specialist with extensive field experience in land surveying, topographic mapping, drone mapping, CAD drafting, and geospatial data processing.... Read more

I am an experienced Land Surveyor and GIS & UAV Mapping Specialist with extensive field experience in land surveying, topographic mapping, drone mapping, CAD drafting, and geospatial data processing. My experience includes land measurement, topographic surveys, drone/UAV photogrammetry, orthomosaic generation, DEM/DSM processing, contour mapping, GIS digitizing, coordinate-based mapping, and CAD drafting. I work with AutoCAD, ArcGIS, Global Mapper, Google Earth, and Microsoft Office, and I have practical experience working with Total Station, GNSS/GPS, and DJI drone platforms. My services include: • Land & Topographic Mapping • UAV / Drone Mapping • Orthomosaic, DEM & DSM Processing • Contour & Elevation Mapping • GIS Digitizing & Spatial Data Processing • AutoCAD Survey Drafting • Coordinate & Boundary Mapping • Survey Data Processing and Visualization • CAD/GIS Data Conversion and Cleanup I have worked on field survey and mapping projects involving large project areas and multidisciplinary teams. I understand the importance of accurate data, clear deliverables, organized files, and professional communication. I am available for remote GIS, CAD, mapping, and survey-data processing projects, as well as project-based collaboration. My goal is to provide accurate, practical, and professional geospatial deliverables that meet the client's requirements and project specifications.

Imtiazi line work as Survey & Architect provides professional land surveying and architectural design services with 15+ years of experience. Our services include topographic surveys, property surveys... Read more

Imtiazi line work as Survey & Architect provides professional land surveying and architectural design services with 15+ years of experience. Our services include topographic surveys, property surveys, land demarcation, land division, land record verification, land management, architectural design, working drawings, 2D plans, 3D elevations, and interior design. We focus on accuracy, quality, and client satisfaction, delivering reliable solutions for residential, commercial, and development projects.

I graduated Technical University of Constructions Bucharest - Faculty of Geodesy and Cadastre and I'm looking for a home based collaboration. I have over 15 years work experience in topographical su... Read more

I graduated Technical University of Constructions Bucharest - Faculty of Geodesy and Cadastre and I'm looking for a home based collaboration. I have over 15 years work experience in topographical survey and levelling, project management: - Experience with working in a lot off Software such as AutoCAD, Civil 3D, Autodesk Revit, SketchUp, Cad&Pillar; -Designing and making plans for buildings, parcels of property, roads, railways and bridges, rehabilitation whites of rivers, irrigation and drainage networks; - Designing buildings projects using Autodesk Revit BIM software for structural design, MEP engineering, and construction; - Highly experienced in Total Station, Levels and GPS and their associated software (Trimble 5503 Servo Total Station Laser; Geodimetere 510N Total Station, Theo 010a, 020b Theo, Koni Level 007, Trimble S6 Total Station, GPS Trimble R3). Starting June 2003 I worked as Land Surveyor for RomProiect International, a Roumanian company which has developed numerous projects as construction of AFI Palace Bucharest Mega Mall, owned by AFI Europe, part of Africa Israel Group. Starting November 2008, the Canadian company, SNC Lavalin, took over the Romanian company Romproiect. After 4 years working for SNC Lavalin as Senior Land Surveyor, I grabbed the opportunity to be part of the team working on the new Bucharest Metro Line with 7 new stations. 4 years I worked as a Senior Land Surveyor for A.T.C. - Actual Tera Construct, Beneficiary SOLDATA GROUP where I coordinated the work of the surveying team for this project, including building surveys. In present I work as Project Manager at Metrorex, Coordinating the surveying department of Bucharest Subway . Also I have a contract for designing forest roads using Civil 3D software with a roumanian design company, ProForest.

Professional Civil Engineer, BIM Lead, and Infrastructure Specialist with 10+ years of proven delivery across tier-1 oil & gas EPC facilities, heavy civil infrastructure, structural bridges, municipal... Read more

Professional Civil Engineer, BIM Lead, and Infrastructure Specialist with 10+ years of proven delivery across tier-1 oil & gas EPC facilities, heavy civil infrastructure, structural bridges, municipal road networks, and multidisciplinary commercial/residential architecture. Proven Track Record on Major Capital Projects: • Project Manager Assistant — G.E.T Technical Services on the Tilenga Upstream Oil & Gas Development Project (TotalEnergies EP Uganda, Buliisa / Albertine Graben). • Site Manager & QA/QC Manager on the $19M CNOOC Kingfisher EPC Project (China State Construction Engineering Corp - CSCEC). • Supervision on the $430M Entebbe International Airport Modernization with Dar Al-Handasah. • Site management on national bridge programs (Awoo Bridge $2.7M & Nalakasi Bridge $2.7M) under the Uganda National Roads Authority (UNRA). • Engineering surveying & CAD modeling on the $26M Nansana–Busunju highway with China WuYi. Core Technical Services & Capabilities: 1. MEP Modeling & Engineering Analysis: • Complete Mechanical, Electrical, and Plumbing (MEP) BIM coordination in Autodesk Revit MEP & Navisworks Manage. • HVAC mechanical design: air distribution duct sizing (Equal Friction and Static Regain methods), air terminals, and mechanical plant room equipment layout. • Electrical distribution modeling: primary switchboards, branch panels, cable tray routing, conduits, and circuit schedules. • Public health & plumbing: gravity drainage with sloped piping (1%–2% fall), soil/waste stacks, domestic cold & hot water distribution, and fire suppression sprinkler systems. • 3D clash detection, interference checking, and coordination reports across MEP, architectural, and structural trades. 2. Architectural & Structural BIM & FEA: • Autodesk Revit (Architecture & Structure) modeling from conceptual design up to LOD 350 construction documentation. • Detailed construction drawings, building sections, elevations, and permit packages. • Automated Bar Bending Schedules (BBS) and reinforced concrete detailing. • Structural modeling and FEA checks (Autodesk Robot Structural Analysis, ProtaStructure, and MIDAS Civil/midasGen per Eurocode 2 and BS 8110). 3. Civil Infrastructure & Earthworks: • Autodesk Civil 3D terrain modeling (TIN surfaces, LiDAR point clouds, GPS survey points). • Horizontal & vertical road alignments, superelevation transitions, custom assemblies, and 3D corridors. • Earthwork volumetric cut/fill calculation (Average End Area & Prismoidal methods) and Mass Haul Diagrams. • Gravity stormwater drainage networks and pressurized piping systems. 4. Construction QA/QC & Digital Geomatics: • Full compliance with ISO 9001 (Quality), ISO 14001 (Environment), ISO 45001 (Occupational H&S), and ISO 19650 (BIM Information Management). • Inspection & Test Plans (ITPs), material laboratory testing audits (concrete, soils, asphalt, steel), and high-precision geodetic setting out. I combine real-world site construction supervision with cutting-edge digital BIM workflows. Every drawing and 3D model is produced for practical constructability, exact tolerances, and zero clash errors. Ready to assist with your architectural plans, MEP coordination, structural calculations, civil earthworks, or 3D CAD models. Click "Invite to Project" or send a direct message to discuss your scope!

A HIGHLY ADAPTABLE ENGINEER with a total of 14 years experience on Multiple Design Projects 3D/2D Conceptual Design of Mechanical Systems. - Pro/Engineer - Inventor

A HIGHLY ADAPTABLE ENGINEER with a total of 14 years experience on Multiple Design Projects 3D/2D Conceptual Design of Mechanical Systems. - Pro/Engineer - Inventor

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manuf... Read more

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manufacturable product that meets their specific goal. Based on your needs, you may choose from any number of the following services: - Concept Development - 3D Modeling & Rendering - Mechanical Analysis - Drawings & Documentation - Fabrication Sourcing - Consulting Certifications: Bachelor of Science in Mechanical Engineering - Valparaiso University, 2011 Certified SolidWorks Professional

I am structural engineer mainly focus on timber structures. I provide ; Timber Frame Shop Drawing Services ✔ For Architects, Engineers, Contractors, Fabricators & Manufacturers ​✔ Floor Plan , Blue... Read more

I am structural engineer mainly focus on timber structures. I provide ; Timber Frame Shop Drawing Services ✔ For Architects, Engineers, Contractors, Fabricators & Manufacturers ​✔ Floor Plan , Blueprints & CAD Drafting Drawings ​✔ Drawings Completed in 1 -3 business days ✔ CNC Woodworking files (BVN -BVX-BTL ) Hundegger and more machines ✔ Structural calculations

Bachelor of Mechanical Engineering who has interest and competence in the field of mechanical design, numerical simulation, heat transfer, and energy conversion. Experienced in using engineering softw... Read more

Bachelor of Mechanical Engineering who has interest and competence in the field of mechanical design, numerical simulation, heat transfer, and energy conversion. Experienced in using engineering software such as ANSYS Fluent, ANSYS Mechanical, Autodesk Inventor, and Fusion 360 for analysis, simulation, and product design development. Has skills in 3D modeling, CFD (Computational Fluid Dynamics) analysis, and technical report preparation based on scientific methods.

I am an accomplished Mechanical Engineering graduate from the Indian Institute of Technology Madras. With top rankings in national exams and a CGPA of 8.32, I have been consistently excelled academica... Read more

I am an accomplished Mechanical Engineering graduate from the Indian Institute of Technology Madras. With top rankings in national exams and a CGPA of 8.32, I have been consistently excelled academically. I am skilled in CAD designing, programming languages, and documentation tools. As a member of the IIT Madras robotics club, I contributed to the development of a versatile robotic arm called CricBot. I also served as a mentor and led projects such as CoilGun. My passion extends beyond academics, with achievements in sports and martial arts.

With years of experience as a drafter and designer, I have gained expertise in Civil, Mechanical, Architectural, and Electrical drafting projects. My proficiency in AutoCAD and Inventor has enabled me... Read more

With years of experience as a drafter and designer, I have gained expertise in Civil, Mechanical, Architectural, and Electrical drafting projects. My proficiency in AutoCAD and Inventor has enabled me to produce accurate and detailed technical drawings, resulting in positive feedback from clients and colleagues. As a freelancer, I have worked on various projects, honed my skills, and garnered a broad skill set. As a passionate and highly skilled drafter and designer, I founded 3×16 Drafting And Design to provide quality drafting services to clients needing accurate technical drawings. With my extensive experience in various drafting projects and proficiency in AutoCAD and other CAD softwares, I am committed to exceeding client expectations and fostering growth in my drafting skills.

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technic... Read more

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technical University of Munich in Germany, -QUT in Brisbane in Australia. I am a driven, creative and organised executive engineer. I have been a company director since 2011, and this shows up in the way I cut to the chase, build strategies and plans, track progress, report and interact with people. I only do high-quality research and modeling. My moto is: first time right. I delegate simpler work and do all the really challenging work and peer reviews myself. I have reached the stage in my career where projects in any industry are similar. If it flows, I can design it. For example, the set-up of the CFD with waves for the marine industry is identical to the set-up of an electromagnetic radiation model. The waves need to be dampened at the boundaries of the models so that the model is not riddled with non-physical reflected waves. Setting up a mesh (pixelisation of the geometry on which the equations are calculated) for a marine foil has exactly the quality criteria as a mesh of a heat exchanger. In all R&D projects, spending between a few days to a few weeks in the most complex cases, enables me to become an expert in the field. My favorite type of project is R&D. I love going deep, learning new things, planing and figuring out how something’s going to work and how to optimise it. I have used Computational Fluid Dynamics (CFD) professionally since 2006. After a thorough CFD software comparison, I selected Siemens STAR-CCM+ and I have used it exclusively ever since. Star-CCM+ is a high productivity CFD software, equivalent to ANSYS Fluent. For more information: resolvedanalytics.com/theflux/comparing-cfd-software-part-4-comprehensive-cfd-software-packages My first job (9 years) was in building physics, for a premium building services consultancy. I set up the CFD modelling capability from scratch, and I became the CFD expert in the Australian Standards 1668.2 committee. I performed CFD modelling for: ventilation (natural and mechanical), fire, active facades conjugate heat transfer, pollutant dispersion and wind. My performance-based designs saved carpark owners and contractors 100,000's of $. I spent most of 5 years researching active facades that store energy and redirect sunlight deep in the building. I modelled heat transfer, phase change and radiation in the CFD software. In 2015, my mother was diagnosed with cancer, and I moved back to France temporarily with my family to look after my parents. I decided to start a "portable" consulting and supercomputing business and called it trampoCFD. Trampo for trampoline: my secret weapon to keep a creative mind is an Olympic trampoline break multiple times a day. I applied my CFD knowledge to improve process performance in many different industries: pneumatic conveyors, mining classifier, injectors, factory, vertical farm and carpark HVAC, irrigation, ohmic heating, coffee machine, marine and wind power generation to name a few. My skills include: -dilution/dispersion, -mixing, -Multi-phase and phase change (Free surface flow, evaporation/condensation, melting/solidification) -Electromagnetics (Joule's effect, Ionic wind, electromagnet) -DEM (grain, sand) -Conjugate heat transfer -Automation -Optimization -Moving bodies -CAD: Solidworks and NX -FEA: Electromagnetic static or dynamic simulations In 2019, Siemens approved me as a software reseller, which means Siemens recognised my ability to provide technical support to CFD engineers on Star-CCM+. This enables me to continue helping my clients once they develop an in-house CFD capability. In 2020, I became the lead CFD engineer of a group of 4 engineers and 2 developers who take on the most complex CFD and multiphysics consulting projects . I hope the above summary gives you a clear idea of my capability. I would love to discuss your project. Please get in touch! Best Regards, Guillaume Jolly ▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒: guillaume_jolly_pro ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (iphone: ▒▒▒▒▒▒▒▒ & ▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒)

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initi... Read more

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initial concepts through design and prototyping, and into manufacture coupled with a strong knowledge of Design For Manufacture (DFM) or Design For Assembly (DFA). 3D & 2D Design Work Any kind of 3D Modelling and 2D engineering design work and CAD Design is being done in HCB everyday, precisely and within time targets. Our knowledge of various materials and production techniques allow us present different alternatives to clients. Composites HCB is capable of giving consultancy services on almost all sub-fields of composite design and production processes. Our main experiences are on hand lamination, vacuum bagging, vacuum infusion, L-RTM, RTM processes with Thermoset resins and injection with Thermoplastic resins. Tooling Design ➢ Big scale light-tool (SMP, MDF, etc.) plug & mould design and manufacturing consultancy for composites and sheet plastics production ➢ CNC milling process optimisation (cost, timing, quality) ➢ Transportation / Assembly Jigs & Fixtures design Mechanisms Design HCB Consulting understands state of the art manufacturing technologies from traditional lathe and milling cutter to modern 5 axis CNC work centres and erosion machines. We deliver robust bespoke mechanism designs that can be manufactured and work for long years without any problems

Hi! I am an architect and 3d visualizer with over 7 years experience in 3d modeling and rendering. I have worked for several European architecture firms, currently working within an architecture stud... Read more

Hi! I am an architect and 3d visualizer with over 7 years experience in 3d modeling and rendering. I have worked for several European architecture firms, currently working within an architecture studio. My skills have been proved on various architecture contests always willing to challenge my abilities trough interesting and high demanding projects. I am proficient with: - 3DStudioMax - Archicad/Autocad - Sketchup - Adobe Photoshop/AfterEffects.

I am a mechanical design engineer. I am an expert in 2D drawing and 3D modeling. I have expertise in using Autocad and Solidworks software. - 3D models, - Concept design, - Product design, - Industria... Read more

I am a mechanical design engineer. I am an expert in 2D drawing and 3D modeling. I have expertise in using Autocad and Solidworks software. - 3D models, - Concept design, - Product design, - Industrial Design, - Mechanical design, - Rendering, - Mookup and Prototyping (3D Printing or Machining), - Machining and Manufacturing, - etc

To contribute to the well-established company’s success where my professional and educational experience could be utilized, benefit the organization, and enhance my career path. SKILLS • Knowledgeab... Read more

To contribute to the well-established company’s success where my professional and educational experience could be utilized, benefit the organization, and enhance my career path. SKILLS • Knowledgeable in AutoCAD • Knowledgeable in Sketch up plug-in for rendering 3Dmodels • Knowledgeable in D5, Enscape, and Lumion • Proficient in reading and understanding architectural, structural, mechanical, and electrical plans and diagrams. • Literate in Microsoft Word, Microsoft Power Point and Microsoft Excel. • Can Manage a Filing System A detail-oriented Draftsman with over 10 years of experience in 2D and 3D design across the Philippines and Qatar, with a strong specialization in landscape detailing, drafting, and rendering. Proficient in preparing shop drawings, BOQs, as-built documentation, and technical proposals for landscaping projects. Known for excellent coordination with crossfunctional teams, high-quality drafting output, and site-based precision. With over 6 years of focused experience in landscape drafting and design, I have developed strong expertise in preparing shop drawings, 3D models, and as-built documentation for large-scale landscaping projects. At Boom General Contractors and Metroscape in Doha, I led and supported the production of detailed landscape plans, coordinated with multidisciplinary teams, and managed site-based measurements for accurate project execution. My background combines technical precision with leadership in team workflows, ensuring high-quality outputs that meet client and project requirements.

I’m an architect specialized in both interior and exterior 3D design. I use 3ds Max and Corona Renderer to create high-quality, realistic visuals. Let’s turn your ideas into stunning images — on time,... Read more

I’m an architect specialized in both interior and exterior 3D design. I use 3ds Max and Corona Renderer to create high-quality, realistic visuals. Let’s turn your ideas into stunning images — on time, and with care.

I am a design engineer. I have a master's degree in design and manufacturing. I like to do initiative and unique work. I am a specialist in 2D Design, 3D Design, 3D models, etc regarding engineering d... Read more

I am a design engineer. I have a master's degree in design and manufacturing. I like to do initiative and unique work. I am a specialist in 2D Design, 3D Design, 3D models, etc regarding engineering design. Excluding engineering, I have knowledge about logo Design, graphics Design, digital marketing, video editing, office skill also. I have 1.5 years of academic experience in the reputed university of India. I have Industrial experience also. I worked on different projects which are related to design.😊 I believe in customer satisfaction, quality work and I’ll complete the given task on time.