Hire the best DesignBuilder experts for your company

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

I am a mechanical energy engineer, I studied at the Lebanese University and then followed a Masters' degree in renewable energy at the Saint Joseph University. I currently work at PDP Energy, an engin... Read more

I am a mechanical energy engineer, I studied at the Lebanese University and then followed a Masters' degree in renewable energy at the Saint Joseph University. I currently work at PDP Energy, an engineering consultancy in the field of power generation, renewable energy and energy auditing and I am following a Master’s in Computational Engineering. I have three years of experience in power plant design from PFD and flow calculation, P&IDs to 3D piping and pipe stress analysis. Also, I design steel structures for solar farms and simulate wind calculations. Furthermore, I am assisting to an energy audit project that joins over 40 large companies in Lebanon to help them reduce there energy consumption and there carbon footprint through an ASHRAE level-2 audit. The topics that I am most concerned in are: Energy, Engineering, Thermodynamics, Heat Transfer, Fluid Dynamics, Theology, Climate Change and many others. My hunger for knowledge drives my plans and actions. My integrity forces me to do things the right way or rather not do them at all. That's why, you can trust me. I'm an engineer.

With over 4 years of experience in Building Energy Modeling and Building Performance Analysis, Raheel has worked on a variety of international projects supporting certification and regulatory complian... Read more

With over 4 years of experience in Building Energy Modeling and Building Performance Analysis, Raheel has worked on a variety of international projects supporting certification and regulatory compliance. His experience includes Energy Modeling for LEED, ESTIDAMA and MOSTADAM using IESVE. He has also contributed for regulatory compliance framework in UK Australia and India. Initially he has experience of working on various projects using DesignBuilder in past. Raheel also performs daylight simulations and HVAC room load calculations using more advanced tool like Designbuilder and IESVE. Thermal comfort analysis for the residential and non-residential buildings in UK and other regions

Architectural designing, urban planning, calculation for heating/ cooling balance. AutoCAD, ArchiCAD, Sketchup, Twinmotion, 3ds max, Revit, Design Builder.

Architectural designing, urban planning, calculation for heating/ cooling balance. AutoCAD, ArchiCAD, Sketchup, Twinmotion, 3ds max, Revit, Design Builder.

BIM Architect with 3+ years experience, known for a collaborative approach and a strong foundation in architectural principles, delivering designs with coordinated architectural documentation and GFC... Read more

BIM Architect with 3+ years experience, known for a collaborative approach and a strong foundation in architectural principles, delivering designs with coordinated architectural documentation and GFC sets using Revit, Autodesk Construction Cloud and related tools. I bring proven capability in MEP/Structural coordination, formwork/MIVAN workflows, and site execution oversight, blending design innovation with practical functionality. Detail-oriented and deadline-driven, I ensure high-quality, timely submissions while continuously pushing creative boundaries to add lasting value to every project.

Architectural Designer, BIM Specialist, and 3D Visualization Specialist with 10+ years of experience in architectural design, interior design, BIM modeling, construction documentation, and architectur... Read more

Architectural Designer, BIM Specialist, and 3D Visualization Specialist with 10+ years of experience in architectural design, interior design, BIM modeling, construction documentation, and architectural visualization. Experienced in residential, commercial, hospitality, healthcare, and international projects including US-based architectural projects. Skilled in transforming concepts into functional, aesthetic, and technically accurate designs through advanced digital workflows. Strong expertise in Autodesk Revit, AutoCAD, 3D modeling, rendering, BIM coordination, and construction documentation. Experienced in delivering complete architectural solutions from concept development to presentation and technical documentation.

I have over 7 years of experience in the Heating, Ventilation and Air Conditioning industry. I am registered with the Engineering Council of South Africa. I specialize in commercial buildings and... Read more

I have over 7 years of experience in the Heating, Ventilation and Air Conditioning industry. I am registered with the Engineering Council of South Africa. I specialize in commercial buildings and the majority of my designs are chilled / hot water (4-pipe) systems. I have designed and overseen the installation of Thermal Energy Storage (TES) systems with the largest having a total building thermal load of 3MW (850 Tons). Other systems I have design experience in include VAV, VRF, Package Units and Evaporative cooling. The largest building's HVAC system I designed to date was a total of 35000m2 (377000ft2) GLA.

Mechanical Design Engineer with more than 2 years of experience in CAD Modelling, earned 2 Solidworks certificates.

Mechanical Design Engineer with more than 2 years of experience in CAD Modelling, earned 2 Solidworks certificates.

As a dedicated freelancer specializing in construction 3D plans, I offer comprehensive and precise design services using DesignBuilder. Leveraging the advanced capabilities of this software, I create... Read more

As a dedicated freelancer specializing in construction 3D plans, I offer comprehensive and precise design services using DesignBuilder. Leveraging the advanced capabilities of this software, I create detailed architectural and engineering plans that meet your specific requirements. Whether you need layouts for residential, commercial, or industrial projects, I ensure accuracy, efficiency, and compliance with industry standards. My goal is to transform your vision into meticulously crafted plans that serve as a solid foundation for your construction projects.

🔹 About Swifterz – Your Global BIM Partner We specialize in comprehensive BIM services across all disciplines, phases, and levels of development. Our expertise includes: 2D to 10D BIM Modeling (LOD 1... Read more

🔹 About Swifterz – Your Global BIM Partner We specialize in comprehensive BIM services across all disciplines, phases, and levels of development. Our expertise includes: 2D to 10D BIM Modeling (LOD 100 to 500) Clash Detection (Navisworks, Revit, Solibri) 4D Scheduling (Synchro, Primavera, MS Project) 5D Estimation & BOQs (CostX, BIM 360) 6D Sustainability (Insight 360, DesignBuilder) 7D Facility Management & COBie exports Digital Twins & Smart FM (IoT/Ai Integration) Aerial/Drone Survey AR/VR & MR Render and Walkthrough Drafting & Detailing Reality Capture & LiDAR 3D Scanning GIS GPR/Underground Mapping/Concrete Scanning BIM to Field Field to BIM

Hi there! I'm a qualified Mechanical Engineering Technologist (BTech Mechanical Engineering) with hands-on experience in Wet Services & HVAC Draughting, and Energy Efficiency Compliance. 💻 What I Of... Read more

Hi there! I'm a qualified Mechanical Engineering Technologist (BTech Mechanical Engineering) with hands-on experience in Wet Services & HVAC Draughting, and Energy Efficiency Compliance. 💻 What I Offer (Freelance Services): 🔹 Draughting using AutoCAD or Revit MEP – specialising in wet services layouts for residential, commercial, and industrial projects. 🔹 SANS 10400 XA Compliance  ✔️ Deemed-to-Satisfy Calculations (Fenestration)  ✔️ Rational Design using DesignBuilder (Energy Modeling & Reporting) 📌 I work professionally, meet deadlines, and communicate clearly. 📍Based in South Africa | 🌐 Remote Work Available 💬 Let's collaborate! Whether you're a consultant, architect, or contractor, I’m here to support your project needs.

My name is Mrinmoy Das I am a Mechanical Engineer with specialization in Automobile Engineering. My interest is in Machines, the passion to work with machine leads me to get involved in different aut... Read more

My name is Mrinmoy Das I am a Mechanical Engineer with specialization in Automobile Engineering. My interest is in Machines, the passion to work with machine leads me to get involved in different automobile projects such as Supra SAEINDIA, Formula Bharat, RCDC- India and Go Kart. The projects gives me the opportunity to get hands-on experience about the designing , analyzing, optimizing, manufacturing process as well as working with team and time management.

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing... Read more

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing company and in a reputable engineering consultancy doing work for many of their international clients and always subjected to high quality standards. I'm offering my expertise and skills to help you develop your projects from concept to reality. Client satisfaction is my priority.

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 201... Read more

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 2014. After graduation, I am working as a mechanical and architectural design engineer.

my name is Vikanshu Dhawan. I am a mechanical engineer and I have a good experience in SolidWorks as you can see in my portfolio and AutoCAD. I can design any 3d model that you want me to design . I... Read more

my name is Vikanshu Dhawan. I am a mechanical engineer and I have a good experience in SolidWorks as you can see in my portfolio and AutoCAD. I can design any 3d model that you want me to design . I have designed a multitude of plastic and metal components including specialised mobile phones, special purpose machinery, large closures for the oil and gas industry, cosmetic casings and spent many years in the plastic injection mould field much much more. I began my career as a Toolmaker and realised very early on that my future lay in design. I was always very interested in design, especially mechanical design, and became even more enthusiastic with the introduction 3D. This changed the thinking on how designs evolved and I have embraced this technology. (I was a real pioneer and slowly persuaded others that this was the future. I was responsible for introducing CAD to many companies). Throughout my career, I have sought out new ideas and technology and implement them in my workplace. It is my passion. Before becoming a freelancer I worked on many prestigious projects. I have overseen staff, been part of the team - all the usual things; budgets, training etc. However, since becoming freelance, a whole new world of has opened up to me. I have been involved in an overwhelming variety of projects - from a simple tool to a lifesaving device. I work very much with the client on the project design. Some are for crowd funding projects and the enthusiasm of the client soon rubs off on me. My passion is still strong.

Good day to you! My name is Pascal and I am a 3D artist and Unity developer, with a specialization in AR using ARCore, ARkit, Vuforia, and Spark AR. I mostly work in the Unity 3D engine, with wh... Read more

Good day to you! My name is Pascal and I am a 3D artist and Unity developer, with a specialization in AR using ARCore, ARkit, Vuforia, and Spark AR. I mostly work in the Unity 3D engine, with which I developed an augmented reality app and worked on many projects as an artist in game development, product and architectural visualization, real-time and photorealistic rendering, interior design, and more! Blender, Maya, Substance Painter, Zbrush, and Photoshop are all part of my toolbox to create compelling 3D models and renders for your projects. I own a 3D and AR visualization company here in Canada, and I will be more than happy to help you reach your goals! I have strong communication skills both in English and in French. My goal is for you to be 100% satisfied with my services! Talk to you soon!

I have Drafting & Design last 2007 I do work Like Reverse Engineering, 3D modeling, Sketching & Drafting,2D Drawing, Assembly, Sheet metaling, Mold Wizard, Surfacing, Inspection Sheet,3D Scaning, Desi... Read more

I have Drafting & Design last 2007 I do work Like Reverse Engineering, 3D modeling, Sketching & Drafting,2D Drawing, Assembly, Sheet metaling, Mold Wizard, Surfacing, Inspection Sheet,3D Scaning, Design for CNC Router & CNC Leaser Cutting Machine, Prepare Drawing of Structure, Design for Wooden Patten, Aluminum Patten, Thermocal Patten etc.

Education: Graduation in Architecture Skills: AUTO CAD, Google Sketchup, Lumion Experiences: More than 7 years Project Scale: Both Interior and Exterior from 100 - 15000 sq.m Built Up Area

Education: Graduation in Architecture Skills: AUTO CAD, Google Sketchup, Lumion Experiences: More than 7 years Project Scale: Both Interior and Exterior from 100 - 15000 sq.m Built Up Area

I am a Mechanical Design Engineer with 3 years of experience working as a 3D Designer / CAD Modeler in the automotive sector. I am highly proficient in CATIA V5 and SolidWorks, with strong hands-on ex... Read more

I am a Mechanical Design Engineer with 3 years of experience working as a 3D Designer / CAD Modeler in the automotive sector. I am highly proficient in CATIA V5 and SolidWorks, with strong hands-on experience in complex mechanical and plastic part design. Currently, I work as Assistant Vehicle Performance Manager (Adjoint RPV) at Stellantis 🚗, where I am responsible for leading and monitoring Integration and Validation Plans (PIV) for three major projects: O2X (series life), O2K & Make Chassis, and O2 MCA. In this role, I have managed and coordinated more than 170 test resources, ensuring proper planning, allocation, compliance, and validation in line with project milestones. I actively contribute to vehicle ramp-up phases and to maintaining high vehicle quality in an industrial, high-stakes environment. On a daily basis, I design and modify complex plastic parts, from negotiating Class A and Class B surfaces and performing draft analyses, to developing associated Body-in-White (BIW) structures. I am also skilled in Shape Design, Sheet Metal Design, and Reverse Engineering, and I rely on a strong understanding of manufacturing processes such as plastic injection molding, machining, stamping, and sheet metal forming to deliver optimized, cost-effective, and industrializable designs. I am an expert in functional dimensioning and tolerancing (GD&T) 📏 and can produce drawings according to multiple international standards, including ISO 286, ISO 1302, and ASME Y14.5. I also have experience in FEM/FEA simulations, allowing me to validate my designs in terms of mechanical strength, durability, and reliability criteria. I fully understand the importance of design quality within an engineering office and the necessity of delivering useful, high-quality, and reliable results. My work with Boolean operations is well recognized, and I am experienced in creating Bills of Materials (BOMs) in both CATIA V5 and SolidWorks. Throughout my professional experience, I have frequently collaborated with external agencies and multidisciplinary teams 🤝. Meeting deadlines is one of my core values, and I consistently strive to deliver high-quality, original designs that are easy to industrialize and closely aligned with client needs. 🛠 Technical Skills Design & modification of complex plastic parts (Class A & B surfaces, draft analysis, etc.) Body-in-White (BIW) structural design (CATIA V5) GD&T application (ISO 286, ISO 1302, ASME Y14.5) Advanced knowledge of manufacturing processes (machining, plastic injection, sheet metal) Shape Design expertise (CATIA V5) Sheet Metal Design (CATIA V5 & SolidWorks) FEM / FEA simulations and analysis (CATIA V5) Reverse Engineering (CATIA V5 & SolidWorks) Advanced Boolean operations (CATIA V5 & SolidWorks) BOM creation for mechanical systems KPI monitoring and performance indicators 📊", give a new description that show the client il able to help them and resolve ther problemes and ihave great skills and talent in this filds, i need you to give a description to sell my valu for ▒▒▒▒▒▒▒ and freelance field

I hold an Associate Degree in Architectural and Structural Design as well as an Associate Degree in Engineering Design Technology. With 2+ years of experience, I can handle projects big and small. Fro... Read more

I hold an Associate Degree in Architectural and Structural Design as well as an Associate Degree in Engineering Design Technology. With 2+ years of experience, I can handle projects big and small. From basic floor plans, elevations, and section views to MEP layouts, you have projects, you can count on me. Please checkout my other profile on Freelancer as well you can find me at https://www.▒▒▒▒▒▒▒▒▒▒▒▒▒▒/u/Dndagency?frm=Dndagency&sb=t Or my website at dndagency.co

Providing CAD & Rendering Services From 2017. CAD Services: Machine Design, Stricture Design, Product Design, 2D Drafting, Reverse Engineering, 3D Format Settings ETC. Rendering Services: 8K Images, P... Read more

Providing CAD & Rendering Services From 2017. CAD Services: Machine Design, Stricture Design, Product Design, 2D Drafting, Reverse Engineering, 3D Format Settings ETC. Rendering Services: 8K Images, Product Animation,360 Degree Videos, XR Files, Walk Through ETC.

I am a Civil & Structural CAD Designer with a strong foundation in architectural drafting, structural detail engineering, and project cost estimation. I work across both residential/commercial archite... Read more

I am a Civil & Structural CAD Designer with a strong foundation in architectural drafting, structural detail engineering, and project cost estimation. I work across both residential/commercial architecture and heavy civil infrastructure, transforming complex design requirements into clear, buildable technical drawings. Core Capabilities Architectural & Interior Design: 2D architectural floor plans, G+3 elevation and facade designs, spatial layouts, 3D interior renderings, and finish schedules (lighting, panelling, joinery). Structural Engineering & Drafting: Reinforced concrete detailing, precast concrete structures, PEB industrial sheds, bridge substructures, and foundation engineering (including deep pile foundations). Quantity Surveying & Estimation: Detailed Bar Bending Schedules (BBS), Bill of Quantities (BOQ), material estimation, and vendor cost analysis. Technical Documentation: Full working drawing sets, section details, structural framing plans, and submission drawings. Key Tools & Skills CAD & 3D Modeling: AutoCAD (2D/3D), Revit, Google SketchUp Engineering & Analysis: Structural layout design, detailing codes & standards Documentation & Data: MS Excel (Quantity Estimation, BOQ & BBS formulation)

I am a CNC precision machinist offering freelance CAD modeling and 2D technical drafting services in Autodesk Fusion 360. My focus is on creating manufacturing-ready 3D models, clean 2D shop blueprin... Read more

I am a CNC precision machinist offering freelance CAD modeling and 2D technical drafting services in Autodesk Fusion 360. My focus is on creating manufacturing-ready 3D models, clean 2D shop blueprints with GD&T, and custom soft-jaw/workholding layouts. Because I work on the shop floor daily, I design models and prints with real-world machining constraints, tolerances, and setups in mind. 📁 Portfolio & 2D Blueprints: > https://drive.google.com/drive/folders/1YZsBdNTv1MFLt6bq9nsVaqFbrlsbFL_2

I am a mechanical engineering student.My main interest is in the field of CAD & CAE. I have a lot of hands on experience on various softwares like Solidworks , AutoCAD , Fusion 360 , ANSYS. I hace als... Read more

I am a mechanical engineering student.My main interest is in the field of CAD & CAE. I have a lot of hands on experience on various softwares like Solidworks , AutoCAD , Fusion 360 , ANSYS. I hace also worked on several automotive projects like BAJA ATV.Also I am the present head of the student automotive society of my college.