Designs by youssef90

For Project: Epic Sports Goggles
#3 Sport_Goggles by youssef90
2014-10-14 17:17:18
#1 goggles by youssef90
sports glasses
more
2014-10-11 14:57:40
#2 Sport Goggles by youssef90
2014-10-13 13:00:12

Discussion

youssef90

Designer

Tue, 14 Oct 2014 17:17:39 +0000
Thank you for your feedback I just see your last comments, that's why I didn't made those dimensions, check now the file and let me know your remarks and suggests,
those the dimensions of the file:
thiLens height - 47mm
Lens width - 75mm each eye
Nose bridge - 15mm
Ear arms - 100mm straight, and 28 mm for the part around the ear
the thickness of frames is variable, in hte ear part is around 2,7 mm

Cordially,

gcleanth

Buyer

Mon, 13 Oct 2014 22:41:09 +0000
Also, not sure if you saw the comments I posted in reply to dimensions. This was what I posted in the discussion at the start. I note that mainly your lense height is a little smaller than I expected.

---
I don't have any set dimensions at the moment, but the rough estimate on lens sizes that I am working with is approximately 45-50mm height at the peak and 70-80mm wide at the widest point, with the frames surrounding those lenses as required (I would expect around 3-5mm depending on the requirements of the padding).

Ear arms standard size.

Of note, the 3-5mm is thickness of the frames and the bridge width is usually around 12-15mm on average, variable depending on the customer.

If you need something specific to work with go with the following:

Lens height - 50mm
Lens width - 75mm each eye
Nose bridge - 15mm total (from lens edge to lens edge)
Frame - variable for aesthetics, with 2-3mm majority throughout and 4mm maximum thickest
Ear arms - 100mm straight before bending, then 40mm maximum for the part around the ear (including the bend)

gcleanth

Buyer

Mon, 13 Oct 2014 22:39:29 +0000
Thanks youssef, never seen lenses set that way. Sometimes people may get hit in the face with a ball (eg soccer or basketball) - how would those lenses survive a direct hit? Do you have something in mind there?

youssef90

Designer

Mon, 13 Oct 2014 13:00:24 +0000
Hello,

Yes, I did some modification to this model, it's more thinner now,

this is the size of one of the lenses that I made, and I'm waiting your dimensions:
Lens height - 35mm
Lens width - 73mm each eye

if there is any suggest feel free to message me,

Cordially,

gcleanth

Buyer

Sun, 12 Oct 2014 22:10:33 +0000
Looks good. I would probably simplify the arms to make them thinner if possible but more importantly to make frames a single colour. If you can lower the height of the dark background so it's more obvious the lenses are transparent, that would make it clearer.
Can I confirm the height/width of one of the lenses?