#26 WINGED BEACH PIN by BV-MEC-DESIGN
A pin beach for towel fixing fitted with three or four wings that will be open in the sand when the big upper pin is pushed in. To extract the pin the upper pin will be pulled up and the wings will be retired.
Any further alterations and details on request.
more
2016-01-25 10:22:32
#66 CLOVER HOOK by BV-MEC-DESIGN
Hi Alvaro,
Many thanks for your consideration.
I decided to apply a new design, meaning your opinion. So, I kept the winged fixing system and I tried to give a more attractive aspect.
Moreover, I added a few needles to fix the towel (a simple and efficient solution).
Actually, I have knowledge of plastic materials and injection molding (mold design) and I can help you to develop a product suitable for production.
I hope this wil be to your taste and we could collaborate in the future!
Kind regards!
more
2016-02-07 09:08:44
#76 STARFISH SAND BOX PIN by BV-MEC-DESIGN
Hi Alvaro,
Meaning your indications, I imagined a box full of sand weighting of about a pound as you said. The bottom of the box is formed of 4 fins that will open when the case is pushed into the sand. All you have to do is to push the starfish into the the sand, the fins will open and the box will be filled with sand (about a pound). Then you'll have to rotate the starfish clockwise about a quarter of a rotation (90 degrees). The four fins will be closed and you'll have a fixed hook.
The needle will fix the towel.
To remove the pin all you have to do is to pull it out from the sand and remove the starfish cap. Then the sand will be poured out.
I think the most common material to achieve the weight of about a poud is to use just the sand.
Kind regards!
more
2016-02-08 14:48:42
#90 MUSHROOM CAP TOWEL HOOK by BV-MEC-DESIGN
Hi Alvaro,
I have some new ideas for your project.
A sandbox with diameter of 40mm and 250mm long (it contains a pound of sand) fitted with four fins that will open when the hook is inserted in the sand. After the complet insertion the pin will be rotated clockwise about 90 degrees and the for fins will be closed (the same principle used in my previous model). The 40mm diameter pin is fitted with two ears that will allow the rotation and the extraction of the pin.
When the pin is inserted in the sand the corner of the towel will be introduced into the tube and fixed with the mushroom cap (fitted with small teeth).
Many thanks for your attention!
more
2016-02-10 14:40:28

Discussion

No Feedbacks Yet.