Simple 3D SketchUp Project

My company as of now will sell stainless steel water bottles. The bottle will be designed to keep beverages cold for 24 hours and hot for 12 hours. The purpose of the design will be for me to send it to a company that will mass manufacture the bottle. The heart portion needs to appear more as if it is coming from the inside out vs it being screwed or glued on to the outside of the bottle as it is pictured. It would also only read 'Jorvine'.

I want cool, interesting designs of a holder for baby wipes. Moms hold wet wipes in holders because it's easier to handle & pull wipes from. It will be easiest to simply look at the photos. But, this is a container for people to put wet wipes in for their baby. I attached photos of competitors. This is just for reference, there is no need to copy them. This is JUST of competitors.

Need to find the best use of space for our production company building. The building it 100ftx40ft. The front 15ft is already taken with bathroom and entrance. This leaves on open space of 85ftx40ft of wide open space which we need to fill with as many 8ftx8ft rooms as possible. Each of these rooms must have it's own entry ( no Jack and Jill). These do not have to be finished plans, just an overhead view so we can get an idea of the best use of space.

The contestants are to use the existing sketched floor plans provided to create a floor plan to be used in a marketing campaign. The design should fit nicely on a 8x11 glossy and matte sheet that will be have space for a brief narrative of the design. The designer is to use the called out dimensions to scale the plan, as all lines are not shown. Colors are to be assigned to the overall plan, with walls and doors. Rooms are to be labeled and there should be NO furniture. Layers should be used accordingly. The winner will be the d signer that presents the plan in a crisp, modern form that will show well to potential buyers. Upon completion of the design, the winner will be chosen to create up to 12 additional plans and full CAD drawings for construction.

We have a board designed in Kicad with through-hole components and want to replace most of them with SMD counterparts. Board dimensions, terminal blocks and a few more components located around the board's edges cannot be modified. Specifications: Board dimensions: 8.200 x 3.420 inch PCB: 2 layer FR4 1.6mm green Integrated circuits: ATmega1284P-PU (x1), ULN2803 (x2), 74HC595 (x3), CD4021 (x3), DS1307 (x1) and PB82B715P (x1). There is also a piggyback step down buck converter that may be integrated in the main board but this is not important now. Passive components: 66 1/4W resistors, 28 ceramic capacitors, 31 diodes, several plug in terminal blocks and more.