Truck Observation DeckBlind

in CAD Design held by mattk3
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
I am seeking a 3D model design of a truck observation deck (TOD) that will fit within the bed of my 2017 Chevrolet Silverado crew cab truck (model CK15543). In addition to the 3D Model, 2D cad/engineering drawings are required so that a fabricator can construct the TOD out of carbon steel. The attached word document details out what I am interested in and provides photo examples of similar TODs for reference.
Wants:
full dimensional drawings with tolerances and welding symbols shown at all joining locations of the structure. 3D model that shows the TOD in the bed of a truck (drawings of the truck bed included in attached file of the contest but needs to be modeled - simple model is fine). Confirmation of the dimensions in the models to ensure no interference fits or other issues.
theoretical weight (in pounds and kilograms) of the structure with calculations provided. Suggestions on weight reduction options appreciated. TOD must look structurally sound (e.g. gussets/cross members etc).
All 2D cad fabrication drawings to be sent in high resolution PDF.
3D model that I can login and view on line, as I do not have personal 3D model or cad software on my computer. Preference for Fusion 360 but not mandatory.
Don't Wants:
simple illustrations
to check the drawings and see that the structure will not properly fit into the bed of my truck.
Software:
  1. Autodesk Fusion 360
Additional Information
1. The minimum inside length of my truck bed is 67.91", as noted on dimension H of drawing ANB70929.17. I suggest the length to 60" resulting in a TOD standing area of 70" wide x 60" long. This will give a good clearance between the truck tail gate and the backside of the TOD.

2. Based on my review of the truck bed and cab dimensions using drawings ANB70929 pages 12 and 31, I calculate the distance from the floor of the truck bed to the top of the truck cab to be 41.67" ( 16.71" + 21.02" + 58.12"-54.18"). I need for the standing area of the TOD to be 6-7" greater than this dimension. So the legs (distance between the bottom of the base and bottom of the standing area) of the TOD should be ~48" long.

Entries

= Buyer's Rating
1st Winner
#16 TOD_v3 by lexs
2nd Winner
#11 Truck Observation Deck Rev 2 by wajih
#23 TOD by HawT3D
#6 Truck Observation Deck Rev 1 by wajih
#17 TOD Design by Ahmad_Ali
#15 TOD_v2 by lexs
#14 TOD Design by Ahmad_Ali
#4 Truck Observation Deck by wajih
#5 TOD by lexs
#19 TOD by HawT3D
#12 Truck Observation Desk by DeepakMudgal
#18 TOD by HawT3D
#10 TOD by HawT3D
#9 TOD by HawT3D
#7 Truck Observation Deck by olajide Mosuro
#21 Truck Obs Deck Draft by Indranil_Routh
#3 Etron Truck by muhammadarifb
Declined

Discussion

Showing last 20 comments - View All

mattk3

Buyer

Sun, 03 Dec 2023 23:31:21 +0000
Thank you to all the contestants for the thoughtfulness and energy that you put into your designs. Given the high quality of submissions and quick turn-around on clarifications and update, I added a second place prize.

Congratulations to the first and second place winners! Your designs were the best at meeting my needs, in terms of complying with the specification, functionality, constructability, and quick turnaround on comments/clarifications. I would also like to recognize Ahmad-Ali, as his submission was the best at optimizing the design in a way that best transmitted the loads from the TOD into the frame of the truck. I will keep many of you in mind if I do another contest or want to direct hire for projects. Many thanks

mattk3

Buyer

Sat, 02 Dec 2023 04:35:49 +0000
Contestants, I really appreciate the quality of the submissions and the responsiveness to my questions and clarifications.

WalidNagem

Designer

Fri, 01 Dec 2023 14:32:30 +0000
what

mattk3

Buyer

Thu, 30 Nov 2023 22:16:18 +0000
Hello, please submit the files in the form of a pdf file so that I can read and review. Please note that all dimensions must be in the English unit of measure (inches). Thank you.

mattk3

Buyer

Thu, 30 Nov 2023 22:13:11 +0000
Hello, please submit the files in the form of a pdf file so that I can read and review. Please note that all dimensions must be in the English unit of measure (inches). Thank you.

mattk3

Buyer

Thu, 30 Nov 2023 22:00:50 +0000
Lexs, thank you for your competitive submission. I have provided detailed clarifications to your submission.
Thu, 30 Nov 2023 21:59:52 +0000
mattk3 Thanks for clarify. #increaseprize

mattk3

Buyer

Thu, 30 Nov 2023 21:50:10 +0000
Draftcad3D, what you say maybe true in some instances about subcontracting but not in this instance. This is for the personal use of my family and me and this is the first time that I have ever asked for a crowd sourced project. Part of the logic in my contest pricing is that 1) I have never asked for a crowd sourced project and 2) I was trying to purchase the used TOD shown in the truck bed photos for $800 but someone bought it before I could. So after this contest is over, I will be having this fabricated at a cost well above what I missed out in buying used + the cost of this contest. There is a possibility that the fabrication cost may exceed my budget such that I do not have this made, but regardless, i will be paying the winner of the contest, as I greatly appreciate the time and energy that professionals are putting into this. 3) I am also a degreed mechanical engineer (although I’ve not done detailed engineering in or cad/modeling in 18 years) who appreciates the importance of professionals. For reference, I will upload the photo of the TOD that was for sale. I hope this added context helps.
Thu, 30 Nov 2023 18:25:35 +0000
Message for all professionals who will participate in this project
Know that when working on projects like this you draw a line well below the values that are generally charged.
On the other hand, the owners of the contest can deny the prize, they are within their rights.
Generally those who set such a low price are subcontracting. They are not the end customers.
Always go to the profile and see how much they report.
Let's all take care of our profession.

mattk3

Buyer

Thu, 30 Nov 2023 09:30:14 +0000
Hi Wajih, thank you for the competitive entry. I have provided detailed clarifications to your submission.

mattk3

Buyer

Thu, 30 Nov 2023 08:39:55 +0000
Hi JovanS, thank you for your message. I have received atleast one competitive submission with 3D models and 2D fab drawings. I am looking forwarded to receiving additional competitive submissions from anyone that can deliver to the stated requirements, including the current pricing and deadline.

mattk3

Buyer

Thu, 30 Nov 2023 08:26:37 +0000
Hi Grey-ig, thank you for your interest in working on the project. I look forward to your submission and I will respond as quickly as possible to any requests.
Thu, 30 Nov 2023 05:25:09 +0000
Hello, call me.
Whatsapp +14408806487
Wed, 29 Nov 2023 19:36:49 +0000
Hello, I agree with @draftcad3D. As yui stated. 3D model is required and detailed 2D drawings. Probably 2D drawing for your project would take longer than 3D, and I give my opinion that the current budget is not enough for this project. If you don't plan to increase it, good luck with the receiving projects :)
Wed, 29 Nov 2023 17:26:20 +0000
Hi, Matt! I'm interested in working on this project and have already began working on it.
Wed, 29 Nov 2023 15:49:04 +0000
@mattk3 Thanks for answering. I have 25 years of experience in technical & mfg drawing.
The 3D model can certainly take 3 to 4 hours.
On the other hand, 2D drawings with all the information and study require at least 10 to 15 hours plus 2 hours of revisions. Approximately 20 hours.
And obviously you don't know FUSION.
I wish you the best of luck and don't underestimate the professionals who are in this network.
Greetings

mattk3

Buyer

Wed, 29 Nov 2023 14:38:02 +0000
Ok to use a random value below 1/8”.

mattk3

Buyer

Wed, 29 Nov 2023 14:36:15 +0000
Hi Wajih, suggest using expanded metal. http://www.brown-campbell.com/products/category?page=expanded-metal&path=expanded-metal-grating

wajih

Designer

Wed, 29 Nov 2023 14:22:25 +0000
Hi, I stated working on this and it seems like you haven't specified the thickness of the flooring. Would it be ok if I gave it a random value for now?
Wed, 29 Nov 2023 05:21:03 +0000
Web Designing is the future of all online based industry. Not only online but offline businesses need online promotions to gain business. Every company, service, product is all now based out of WWW.

Lets assume 10 years from now, do you think you will increase your shopping online, looking for information, learning skills, services, products, companies or will you decrease it ?,A HREF="https://www.caba.in/courses/advanced-web-designing-course/">WEB DESIGN COURSE IN DELHI</A>

Similar Contests on Cad Crowd

Necklace Pendant
I need a necklace pendant that is 3D but has a flat back. See the attached photo. The man needs to be more muscular and more broad shouldered and be bald. On the very bottom of it should be the word Conquer.
Selection of technology and design documentation for decorative panels on a catamaran frame
Definition of materials, choice of technology and design documentation for decorative panels on the catamaran frame. Creation of documentation for production and selection of materials for 1) a drawer with two pull-out sections 2) A decorative panel in the front and 3) A decorative panel in the back. When carrying out the work, please take into account the operating conditions of the catamaran - sea water and the sun (high temperature).
Khoeler Gun Barrel
Production of AutoCad drawing suitable for milling out of polestyrene foam, for milling machine. Output must be in one of these formats which the milling machine takes. .stp, stl, or iges.
Band Design
Looking for a driven designer that is capable of understanding the details of ring design. Attention to detail is a must. Basic understanding of jewelry will ensure success. We have such projects weekly..
Rotary Filling Machine
I would like to purchase a full CAD of a rotary filling machine of at least 12 nozzles. I need to know that you have experience in the field. I am wondering if you have a ready CAD that will enable us to speed up the process.