Forest Chalet Village

in 3D Rendering Services held by Luca931
Contest Ended, The buyer is selecting the winner(s).
you have to design a unique chalet house village in the forest, in total 5 houses.

Sitze of the house without terrace should be around 40 - 45 sqm, based on 1 floor only.

Picture n.1 is the position where I think the 5 houses should be.

Picture n.2 could be the driveway.

Picture n. 3 is the floorplan for each house.

This complete area should be a unique place which will get famous worldwide, you can create a garden/ park/ waterfall/ river/ pool/ whirlpool or wathever you think is neccessary to make this place unique! It should be a complete instagram hotspot!

Please consider also the building costs of your ideas, which should be as low as possible!

Google earth link:,+Sankt+Leonhard+in+Passeier,+S%c3%bcdtirol/@46.77620516,11.24135841,1070.68171034a,482.29826133d,35y,117.1809584h,81.04864529t,-0r/data=CigiJgokCdSmJXqUYkdAEbBP5dSjXkdAGbzKuMc0ZiZAITgMLKG2WSZA

some inspiration:

Please share your own special ideas for this project.
suggested materials: wood/ stone/ concrete
Ask for Sample:
please provide sample.


This design involves the intricate relationship of building +activity + Nature to form a wholistic environment packed with activity fun and relaxation. The design merges elements from eastern culture and western culture like the zen and rock gardens and uses them to amplify the usability of the area. The design is also strongly influenced by the adjacent forest and hilly environment. Water features serve to soften the nature of the environment whilst also providing a place for the users to wind down their activity packed day.
Jul 27, 2021 14:17


Sat, 10 Jul 2021 06:55:44 +0000
Interesting contest. As far as I understand, you are looking to design a complex of 5 villas (small village). Those houses should be reached by a road (marked in the yellow line) that extended from the main road. You would also like an attraction (like a common pool, a small lake,..etc) so that the small community can enjoy it.
The design style should contemporary. Please correct me if I'm wrong about the previous information.
Wed, 07 Jul 2021 10:22:35 +0000
Please pre pay the contest.. So that we can proceed with the job.
Tue, 29 Jun 2021 06:09:30 +0000
Dear Sir
The contest is great and interesting, i can work on it and realize a solution integrated with nature and landescape.
Mon, 28 Jun 2021 23:45:18 +0000
Please prepay so we can get to work,(Don't employ people) thank you.
Mon, 28 Jun 2021 21:06:17 +0000
Hi I'm a 3D Visualizer and I happy to work in this project.
Mon, 28 Jun 2021 21:05:42 +0000
It's a great contest.

Similar Contests on Cad Crowd

Water Fountain Indoor - 3D Model Design
Our company is looking to develop a unique Indoor Water Fountain 1. We are looking to develop a unique Indoor Water Fountain. 2. We plan to sell it on, therefore, the design is to be unique and distinct from other competitors on the platform. 3. In addition to a stream of water, we wish for that fountain to have a place for candles or incense, so this can be a two-in-one kind of product. 4. Water fountains such as this should be used indoor, and they should be creating a wonderful environment in the house. A meditative, calm, and relaxed sense of feeling by letting it run in the background. Item Dimensions L x W x H: Up to 9 x 9 x 11 inches Item Weight: Up to 3 Pounds Material: Polyresin For your reference: • Top 100 sellers of Indoor Water Fountains in Amazon: • A reference to a unique and distinct design that combines both indoor fountain as well as candles/light:
Smile, photo and key is active.
I would like my 2D drawings converted into 3D renderings to be used for all of our marketing materials.
Custom Personal Care/Shampoo Bottle
Looking for a unique custom design bottle for our new business. Inspiration should be the Bath & Body Works Foaming Hand Soap Bottles (Link below). It needs to look like a product from a high-end fashion label. A signature element of the bottle should be our logo embossed up the side of the bottle. This should be a stand out feature. We are looking to be able to scale the design to different size bottles 150ml, 300ml, 600ml. Also looking for the bottle to have the option of interchangeable dispenser tops- caps, pumps, and foaming pump.
Piled Raft Footing
I need a single 3D or 2D rendering of a "piled-raft" foundation footing. I describe how to make it in a series of 10 steps (below) but reader will benefit if they can see it visually somehow. The illustration should be in black and white only, Gray shading is permissible. Standard architectural fill patterns for concrete, foam, soils etc. are OK. The final figure is expected to be published in a cabin-building book, with due credit to illustrator. The construction description is below. Any questions, please ask for clarification if something is unclear! Below are construction details for a piled-raft footing that may be suitable in locations where hand-digging holes to the frost line is made difficult by rocks, roots, or dense, compacted till. The pad footing is linked to driven pin pilings that extend downward to high weight-bearing soil. The friction with the pin pilings adds settling resistance to the pad. The footing form itself is built of XPS foam, which remains an integral part of the footing insulating against cold penetration from above. Materials per footing: XPS foam insulation (blue or pink) 1 sheet 2’x 8’ x 2” Crack-resistant fiber-reinforced concrete mix (1 80# bag) ½” x 12” concrete anchor bolt 5/8” x 20’ rebar (number depends on driven depth) Construction adhesive (1 tube) Ground-marking paint (1 spray can) Directions: 1) Excavate a square hole 3’x 3’ and ~12” deep. Pile excavated soil on a tarp for later use as backfill. Leave the bottom of this excavation level and soil on bottom undisturbed (important!). 2) Cut four pieces of XPS foam 2’x2’ in size. On 3, find the center, and cut a circular hole with 9” radius (18” diameter) using jig saw or drywall saw. Bond these together with foam-compatible adhesive along the circular cut edge. On the fourth piece of foam, find the center and cut a circular hole with 4” radius (8” diameter). Bond this piece to top of the other three. 3) Lay the XPS form flat on bottom of excavation exactly where the footing/pier will be. Reach inside and spray paint the ground within the form. Then remove the XPS foam form and set aside. 4) Within the painted circle, drive an 8’ length of rebar into the ground as far as it will go, or until just 8” protrudes, whichever comes first. For ease, drive this with a hand-held fence post driver and finish with hand sledge. Cut off protruding rebar 8” above ground (a Milwaukee 12V cordless subcompact bandsaw is an excellent tool for this). 5) Continue in this fashion until you have driven 6 rebar pins, well-spaced, into the footing area, but none closer than 2” to the painted outline of the footing. 6) Using a rebar bender tool, bend the protruding length of each piece of rebar to a ~ 90-degree angle, 3 or 4 inches above the ground. Keep all bends within the footing outline. These bends will lock the rebar into the concrete raft when the footing is poured. 7) Place the previously constructed XPS form on the painted ground surface, enclosing all of the driven pin piles. Mix fiber-reinforced concrete to specifications. Weight form down with cinderblock or large stones and pour mix until it is flush with top of the form. 8) In the center of the 8” diameter hole, insert 12” anchor bolt, pushing through the wet concrete until it hits the ground, leaving 4” exposed. Ensure it’s centered and plumb. Cover exposed concrete with plastic and let the footing cure 72 hours. 9). Cover the form with dirt excavated originally. Grade to drain away from the top of the footing. Seed, and cover with straw until vegetation is established. (Omit this step from drawing....). 10) An 10" diameter round wooden pier will be set on top of this footing. The protruding bolt in the footing will insert in a hole drilled in bottom center of the pier.
1941 Cabover Concept
This is a very rare vehicle. Maybe 1 of 10 still in existence. I am looking for 3-D renderings based off current setup. This is going to be a custom build and I am hoping to find some concepts to incorporate into my vision and then to reality. I am not 100% positive on how I want the back to look so I am hoping with different concepts I am able to get a good aesthetic visual. I have the original cab and the remainder of the vehicle is custom. Have a brand new air ride chassis from roadster shop that will allow the truck to rest on the ground if needed, restored LS motor with 550hp, custom made bed, but not happy with the current fender look. I have multiple pictures I can send if interested. I feel this will be a very rare vehicle and I need some help making that vision. In addition I will need help after the contest with edits.