Breakaway and adjustable collar for catsBlind
in
CAD Design
held by
mitel
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Features:1) Breakaway - cats can release the clip by itself for safety reason.
2) Adjustable - pet owner can adjust the tension of collar for different sizes of pets. E.g. Higher tension for bigger cats, which makes them more difficult to release the clip themselves than kitten.
3) The design will be for small sized buckle that attaches to a 3/8" wide strap. It would be good if it can fit the smallest size to 1/8" as well. But 1/8" is a bonus feature not a must.
4) The CAD format has to be 3D print. We will test the feasibility of the design with 3D printers.
5) The design should not infringe on an existing patent.
Wants:
Function, Usability, Form
Additional Information
**IMPORTANT**A breakaway collar ensures if cat gets its collar stuck or caught on something that entangles it, keeps the cat safe from injury, choking or worse.
For the adjustable feature, cat owner needs to be able to easily adjust the tension (3 levels of holding strength: High tension for senior cat, middle tension for adult cat, low tension for kitten) right on the buckle. Cat owner can increase the loading tension of buckle whereas the cat can still break free if placed under too much tension.
First place will continue working with us on the design for including full buckle case design for manufacturing / mass production, and other renderings of the design along with the inside mechanism.
File format: STL preferred
**REMARKS**
Due to extra time needed to be invested in 3D print some of the contestant's ideas for checking the feasibility and usability, the contest is extended for extra 10 days.
**3D PRINTERS**
We use 2 kinds of printers below to test out your ideas - Please bear in mind your design should fulfil the requirement of feasibility not just in design rendering, but in actual 3D print samples.
3D Printer – Ultimaker 3
Fuse Filament Fabrication (FFF), dual extrusion nozzles with auto nozzle lifting
system. Build volume 197 x 215 x 200 mm
ultimaker.com/3d-printers/ultimaker-3
3D Printer – Form 3
Low Force Stereolithography (LFS) technology for high precision printing from
a liquid photopolymer resin. Build volume 145 x 145 x 185 mm
formlabs.com/3d-printers/form-3/
Entries
#48 Breakaway buckle, 3 presets for tension selection
by oscarromero
Hidden design
Download Files
Jun 13, 2021 7:26
#49 Breakaway buckle, 3 presets for tension selection, update
by oscarromero
Hidden design
Download Files
Jun 13, 2021 7:28
#50 Breakaway and adjustable collar for cats.C1
by Quantum_Designs
Hidden design
Download Files
Jun 19, 2021 16:54
#54 Breakaway and adjustable collar for cats 51.R1
by Quantum_Designs
Hidden design
Jul 9, 2021 9:42
#55 Breakaway and adjustable collar for cats 50.R1
by Quantum_Designs
Hidden design
Jul 12, 2021 5:47
#47 Breakaway and adjustable collar for cats.C1
by Quantum_Designs
Hidden design
Download Files
Jun 11, 2021 5:00
#56 Breakaway and adjustable collar for cats
by Hamed1
Hidden design
Download Files
- Rendering Images — 2021-07-14 082534
- Rendering Images — 2021-07-14 084825
- Rendering Images — 2021-07-14 084841
- Rendering Images — 2021-07-14 084859
- STEP/STP 3D Modeling — Breakaway Buckle modify N
- STL Modeling — Breakaway Buckle modify N - Adjuster-1
- STL Modeling — Breakaway Buckle modify N - Inner buckle-1
- STL Modeling — Breakaway Buckle modify N - outer buckle-1
- STL Modeling — Breakaway Buckle modify N - Papillon-1
Jul 14, 2021 6:54
#34 Breakaway and adjustable collar for cats
by Hamed1
Hidden design
Download Files
- pdf — Breakaway buckle presentation file
- Luxion KeyShot — buckle.176
- Luxion KeyShot — buckle.177
- Luxion KeyShot — buckle.178
- STEP/STP 3D Modeling — Breakaway Buckle
- STL Modeling — Breakaway Buckle - Adjuster-1
- STL Modeling — Breakaway Buckle - Inner buckle-1
- STL Modeling — Breakaway Buckle - outer buckle-1
- STL Modeling — Breakaway Buckle - Pap
May 28, 2021 16:23
#24 Breakaway and adjustable collar for cats
by Hamed1
Hidden design
Download Files
- Luxion KeyShot — untitled.172
- Luxion KeyShot — untitled.171
- Luxion KeyShot — untitled.173
- Luxion KeyShot — 2021-05-24 185057
- Luxion KeyShot — 2021-05-24 185117
- STL Modeling — Breakaway Buckle - Adjuster-1
- STL Modeling — Breakaway Buckle - Inner buckle-1
- STL Modeling — Breakaway Buckle - outer buckle-1
- STL Modeling — Breakaway Buckle - Pap
May 24, 2021 17:35
#43 Adjustable Breakaway Collar For Cat.
by arivudhayalaguru
Hidden design
Download Files
- 3D PDF Files — CAT
- FEA Simulation — Strain report
- FEA Simulation — Stress Report
- e-drawings — Cat Collar Buckle-Static 1.analysis.eprt.analysis
- Ansys FEA — Cat Collar Buckle-Static 1-Stress-Stress1
- STEP/STP 3D Modeling — Cat Collar Buckle
- STL Modeling — Controler Switch
- STL Modeling — Controler Guider
- STL Modeling — Tension Buckle
Jun 5, 2021 12:50
#38 Breakaway and Adjustable Collar for Cat
by arivudhayalaguru
Hidden design
Download Files
May 31, 2021 8:09
#9 Adjustable Tension With Breakaway Buckle
by arivudhayalaguru
Hidden design
Download Files
May 15, 2021 16:25
#6 Breakaway Adjustable Tension Buckle for Cat Collar.
by arivudhayalaguru
Hidden design
May 12, 2021 5:53
#3 ADJUSTABLE TENSION WITH BREAKAWAY BUCKLE FOR CAT COLLAR
by arivudhayalaguru
Hidden design
May 11, 2021 17:42
#33 Breakaway and adjustable collar for cats
by CADOutsourcing
Hidden design
Download Files
May 27, 2021 12:46
#32 Breakaway and adjustable collar for cats
by CADOutsourcing
Hidden design
Download Files
May 27, 2021 12:32
#28 Adjustable Breakaway Buckle for Pet Collar
by zarwanzy
Hidden design
Download Files
- PDF — Adjustable Breakaway Buckle
- STEP/STP 3D Modeling — Adjustable Breakaway Buckle
- STL Modeling — Adjustable Breakaway Buckle - Buckle House-1
- STL Modeling — Adjustable Breakaway Buckle - Adjuster Nut-1
- STL Modeling — Adjustable Breakaway Buckle - Buckle Lock-1
- STL Modeling — Adjustable Breakaway Buckle - Strap Collar Adjustable Breakaway Buckle-1
- STL Modeling — Adjustable Breakaway Buckle - Strap Length Adjuster-1
May 25, 2021 15:11
Discussion
Nice project. Thank you for the contest :)
Cool project.......prepaid for more entries....thanks :)
To further explain the design features, a breakaway collar ensures if cat gets its collar stuck or caught on something that entangles it, a breakaway collar keeps it safe from injury, choking or worse.
Thank you all for your interest. No need to be leashed.
Is the cat need to be possibly leashed thanks to the collar or no ?
Nice Project to our lovings pets, Change from human products. Thanks to prepay
Interesting project.........please prepay for entries.......additional prizes will attract more design entries.......Thank you for the contest : )
Similar Contests on Cad Crowd
Exciting opportunity to become part of a new product
I am searching for a responsive designer who is looking for an opportunity to become part of a new electronic skateboard company. The Participant will have the potential to work on a long term basis.
Necklace Pendant
I need a necklace pendant that is 3D but has a flat back. See the attached photo. The man needs to be more muscular and more broad shouldered and be bald. On the very bottom of it should be the word Conquer.
Facade Designer
I have experience in the façade industry for over 3 years. My experience ranges from aluminum glazing systems facades, stone cladding & Architectural metal works. I have involved in the façade works for numerous prestigious projects in India. Over the years, I fulfilled roles in concept design, System design.
Khoeler Gun Barrel
Production of AutoCad drawing suitable for milling out of polestyrene foam, for milling machine. Output must be in one of these formats which the milling machine takes.
.stp, stl, or iges.
8 home eco-destination by company called Clean Green
Hello,I'm looking to spend 300$ and get some rough concept drawings made up. I am preparing a proposal for funding and want to add some respectable drawings for a wow factor. I plan on constructing 8 homes, consisting of 4 Earthship style and 4 passive house style on a 4 acre property in PEI canada. I have attached hand drawn drafts of the two style homes, floor plans and plot plan. If someone wanted to use them and the reference pictures and whip up some quick but good looking concept drawings I would be grateful and pay 300$ for what should be 3 hours work. What is needed mostly is
-4 elevations of each building (8 total)
- 2 floorplans
- 2 plot plans roughly following my sketch with lots of trees? colored maybe?
Try to follow the references but I know 300$ wont go far so do what you can internet crowd sourcing friends! Thank you
MohanrajVishwanathan