Dragon Head and Punisher Skull Pendant and charm Blind

TIME REMAINING: 17 days, 19 hours
Description:
We are a start up launching a line of jewelry for Men and looking to have, two pendants and two bracelet charms designed to be eventually produced by our manufacture. Also would need a small logo tag that can be attached to our finished jewelry pieces.

1. A Dragon Head based design for a Pendant and also for a bracelet.

2. A Punisher Skull with Half a Spartan helmet based design for a Pendant and also for a bracelet.

3. A small logo tag that can be attached to our finished jewelry pieces.1 design for a logo tag.

We will need several more pendants designed in the future so I am hoping to find someone through this contest to work with again in the future. I am looking for some nice detail and craftsmanship in these pendants.
Wants:
1. Dragon Pendant.

* Want a nicely detailed Dragon head (see attached dragon head image) I like the style of the pictured pendant but I want a few changes. I've included some sketch drawings too.

*Main Pendant: 38-40mm long

*Main Pendant: 18-20 mm wide

*Eyelet hole for chain to go through 6mm inside hole width, we will be using a 4mm Franco boxed style chain. And I want the eyelet hole to be perpendicular to the main pendant. So you can see through the hole looking at the pendant sideways.

*Each eye of the dragon will have a red micro pave cz diamond for the eyes.

*In the open mouth of the dragon want a red in color bead (8mm) (see the image called dragon with bead). Front part of the mouth should be large enough to accommodate inserting the 8mm bead

*On the back side (or underside of pendant) is my Logo name (DRAGON ICE) Anywhere it will fit on the back side.

*Backside does not really need to have any detail except the logo. Only concerned with the details on the front.

*The pendant will be cast in stainless steel and plated with 18K gold plating with black ascents.


2. Dragon Charm.

The Dragon charm should be a duplicate of the Dragon pendant. Except for the following

Charm length: 16 to 20mm
Charm width: 9 to 10mm

* The hole for the bracelet materiel will run from front to back (Mouth to neck) of the charm. 2mm

*In the mouth of the dragon will have two red beads (8mm) in the mouth (see image dragon head) . Front part of mouth will have to accommodate inserting the 8mm beads into the mouth

No micro pave czs on charm


3 . Punisher Skull with Half a Spartan Helmet

Nicely detailed Punisher Skull (full skull) with a half Spartan or roman style helmet on the right side (would like to replicate something just like the attached drawing and image)

*Main Pendant: 40mm tall (not including bale)
20 mm wide
26 mm depth


*Helmet will have brush or feather look on top of helmet

* Eyes of the skull will have small micro pave red czs.

* The feather area (both sides) and some of the areas on the helmet should have white micro pave cz diamonds.

* Pendant should be full 3D, no flat back.

*Logo on back bottom (just the name “DRAGON ICE”)

*I would like it as detailed as possible with engravings in the feathers and , helmet, and skull . Looking for some fine craftsmanship here.

*Bale should be on top of feather area and situated so helmet/skull faces forward. bale needs to accommodate a 4mm franco style necklace.

*Pendant will be cast in stainless steel, with the punisher skull in a silver tone and Spartan helmet plated in 18k gold.


4. Punisher Skull / Spartan Charm:

The Punisher Skull/Spartan Charm should be a duplicate of the Punisher Skull/Spartan Pendant. Except for the following:

20mm tall, 15mm wide, 15mm depth

* No micro pave diamond czs.

*Logo on bottom/back

*Eyelet hole dimension 2mm (holes should run from side to side) so skull is facing forward

*Pendant will be cast in stainless steel, with the punisher skull in a silver tone and Spartan helmet plated in 18k gold


5. Logo tag, This is a really simple effort, needing a small round disc that is approx. 15 mm in diameter and 2mm thick that has our logo on one side and the words “Dragon Ice” on the other. Color would be gold for the main color with black highlights an lettering.
Don't Wants:
Anything that looks cheap or cheesy. I want these to look as realistic as possible.
Ask for Sample:
Please provide sample of on of the designs besides the logo tag and we will select from the best to complete the project.
Software:
  1. 1. AutoCAD (latest) unfamiliar with software. I just want something that can be sent to our manufacture to produce.

Entries

No Entries Submitted Yet.

Discussion

Thu, 16 Nov 2017 20:40:29 +0000
Ruchit, thanks for the question, We just need our brand name on the back which is: DRAGON ICE (just the words) not the design
Eric
Thu, 16 Nov 2017 18:21:23 +0000
hey do want all the designs to be done with logo???

Similar Contests on Cad Crowd

Ring of Eshu
This man’s ring is to be based on the “ring of Barahir” which is described in J.R.R. Tolkien’s “The Silmarillion”, as well as much later in the Lord of the Rings. There are commercial designs of the ring of Barahir, but they are inaccurate- over jeweled, or over coarse and inelegant. The ring is described thus: “An ornate silver ring”; elsewhere - "this ring was like to twin serpents, whose eyes were emeralds, and their heads met beneath a crown of golden flowers, that the one upheld and the other devoured” and again elsewhere in verse; "Proud are the words, and all there turned to see the jewels green that burned in Beren’s ring. These Gnomes had set as eyes of serpents twined that met beneath a golden crown of flowers, that one upholds and one devours: the badge that Finrod made of yore and Felagund his son now bore.” I would like to use silver or white gold as the main material. Yellow gold for the crown of flowers. Tiny emeralds for the snake’s eyes. My ring size is 10.5. Anyway, there is the basis of what I am looking for. Oh, and not macho man snakes; snakes that are kind of elegant. Elven snakes if that makes any sense at all. I've included a rudimentary sketch of my ideas for the relation of the two snakes, as well as a few images of textures like belly scales, and other ideas for the relationship of the snakes. I don't want the ring to be too bulbous or stand too proud, I just lack artistic skill - the ring has to be fairly practical. I'd like the ring to have scale detailing all the way around the band. The crown of flowers can and should be quite flowy and soft - emphasis on the flowers, like a wreath of flowers, rather than the crown. Keep in mind that this ring is symbolic and a reminder of the dual nature of humanity - at our best, we are noble - but at our worst, we are consuming monsters.
Luxury Watches
We are a French brand looking to start our own jewelry and watch collection. We would like to hire a freelancer who can proactively send us proposals for designs. Payment will be done once we approve the proposals.
Someone who can design animal related jewellery.
Hi, I am Javed Siddiqui from Mumbai. I run a jewellery business. I am looking for someone who has good experience and knowledge in 3d designing & modelling. I need jewellery design for my business. The design will mostly be non symmetrical. Like I need to design a pendant related to chihuahua (DOG) with some beading in it. If you think you can do this job, feel free to contact me. Also don't forgot to attach you previous work samples. Applicants without any portfolio will not be considered. Thing needed to design 1- Pendant 2- Bracelet Charm 3- Ring Thanks
Looking for Designers/Jewelers working on Rhino and Cad
Working on several jewelry project. Need a designer/jeweler using Rhino or CAD to prepare the production of my designs. The designer must have Jewelry experience in order to make the designs and technicals.
Cool Detailed Pendant Designs for Men's and Women's Necklaces and Bracelets
I just started a Jewelry Business selling bracelets and necklaces, and I have 3 Pendants I need Designed to eventually be 3D printed and then casted in copper and silver. I need: 1. A Tree Pendant 2. An Eagle Pendant 3. A Lightning Bolt Pendant I will need several more pendants designed in the future so I am hoping to find someone through this contest to work with again in the future. I am looking for some nice detail and craftsmanship in these pendants to sell as high end jewelry.