Calgary - Tuscany and Rocky Ridge LRT Stations Shop Drawings
in
Construction Drawings
held by
Jason B. Taylor
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We are a Building Envelope Contractor that has been awarded this project, and we require shop drawings generated for the exterior architectural panel systems and metal roof system on these two buildings. (see W1D, W3, W5 and R2 on Station Building)
Wants:
We are looking for drawings that mimic the architectural drawings, but only show our specific systems. Details need to be simple and easy for the laymen to understand, yet still precise. Successful applicant must incorporate our specific system details into the shop drawings and produce the drawings in our format with our title block etc.
Don't Wants:
We don't want the successful applicant to spend a lot of time and energy on drawing components of the project that aren't pertinent to our scope of work. Just our systems.
Company Logo:
Yes
Software:
- We use AutoCAD LT 2013
Additional Information
<p>Please complete 1 sample drawing and we'll choose the designer with the best work to finish the full project. I would like you to add the following notes:</p><p>Sample details to look at are 2/A6.02 & 4/A6.04 for package 4D and details 9/A6.10 & 4/A6.15 for package 5A</p>
<p>The systems we are providing for package 4D are Wall Types W2 and W3 (Metal Cladding and Aluminum Composite Panels)</p>
<p>The systems we are providing for package 5A are Wall Types W3 and W5, Roof Type R2, Parapet Types PP1, PP3 and PP4, and Interior Wall Type WD-1</p>
Prepaid PrizeEntries
Discussion
Thanks for the entries and questions. The contest is closed out and we're going to ask TaylorDesignSolutions to finish the full project. 
i am facade designer i would like to work this type of work and pls let me know what is the ststus for this work
regrds
Renji Varkey
regrds
Renji Varkey
You have not provided enough information to make a sample according to your requirements:
Where are your system drawings in cad?
Where are your title blocks with page format A0 A1 A2?
Do the shop drawings include the sub-structure or just the panels?
Best regards,
Jaime Cavazos
Where are your system drawings in cad?
Where are your title blocks with page format A0 A1 A2?
Do the shop drawings include the sub-structure or just the panels?
Best regards,
Jaime Cavazos
What are the specific wall/roofing panel types and/or manufacturer??
Hello from Romania,
Can you send us the DWG of YOUR SPECIFIC SYSTEMS for all Wall Types W2, W3 and W5, Roof Type R2, Parapet Types PP1, PP3 and PP4, and Interior Wall Type WD-1. We need YOUR specific systems DWG in order to integrate them in the details metioned by you (2/A6.02 & 4/A6.04 for package 4D and details 9/A6.10 & 4/A6.15 for package 5A). If you already have the A6.02, A6.04 or A6.15 in DWG format, please send them also. Keep in touch.
Can you send us the DWG of YOUR SPECIFIC SYSTEMS for all Wall Types W2, W3 and W5, Roof Type R2, Parapet Types PP1, PP3 and PP4, and Interior Wall Type WD-1. We need YOUR specific systems DWG in order to integrate them in the details metioned by you (2/A6.02 & 4/A6.04 for package 4D and details 9/A6.10 & 4/A6.15 for package 5A). If you already have the A6.02, A6.04 or A6.15 in DWG format, please send them also. Keep in touch.
As a followup to Dual2's question; please complete 1 sample drawing and we'll choose the designer with the best work to finish the full project. Also, please see the additional information note shown above.
May i suggest that it would be a good idea to ask prospective entries to be a small part of the project to be completed so you can choose a suitable drafter to complete the project.
Hi,
Just I need AutoCAD format drawings please. Thank You
Just I need AutoCAD format drawings please. Thank You
Similar Contests on Cad Crowd
Mechanical engineer for construction and building design
We are an engineering group looking for a native English senior professional with a degree and experience in mechanical engineering, to be part of our remote collaborators. It is indispensable to have real practical experience in one specialty related to the preparation of documents for the definition and construction of systems, equipment and elements for new and existing facilities.
Re-draw and new single family detached house plans for 5 models
Re-draw and new single family detached house plans for 5 models.
Steel Detailing of Waste Water Treatment Plant - Drafting with Tekla Structures
We need shop drawings for Various walkways, stairs, handrails, pipe supports, grated manhole covers associated with the construction of an inlet works structure at waste water treatment plant.
Ting Casita
planning to put a simple Casita in my third garage. Friend will do the construction for me,need a reasonable price person to draft a plan for the city to approve.
Please code me an approximate price. Its a 20'x30' garage, the city allows to build
a 20'x10' casita out of it.So the Casita is only 200SF.
Architecture Drawings: 3D Model/Technical Drawings
Hello
i need help with my course for materials and methods. i have a project due next week; im supposed to build a model with real materials (brick,steel,MDF,concrete)
in order to start i have to draw the model using rhino. i saw one of your technical drawing assembly, it was very detailed, technical and good. That is exactly im supposed to draw but not an actual building/house; I need to pick a very small part of an assigned building from the exterior side (half a wall) , then draw it with details showing any technical and material construction.
- Detailed 3d model of that small structure
- 2D Drawings in details (plans,sections,elevation etc.)
[must be applicable for a contractor/engineer to understand how to build]
would you be able to help me out with this?
Please let me know when you get this
Much Thanks
Alya
Jason B. Taylor
Buyer