CAD model for wireless router
in
Machine Design
held by
rahul19dj
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We have 3 development boards and a LCD which needs to fit in an enclosure. The design of the enclosure is decided so you just need to make a nice enclosure with you CAD tools to fit all the components in.
Wants:
The design should look modern and should have modern esthetics.
Company Logo:
Yes
Software:
- AutoCAD
- SolidWorks
Prepaid PrizeEntries
Discussion
It has to be close to that design but yes to make it compact and modern feel free to innovate as long as it fits the guidelines
Hi,
Is the form of the enclosure supposed to resemble the attachment 'new 3d case 1qs' or are we free to modify the form as long as it fits in with guidelines stated on 'Ninja outlines rev6'
Regards,
Nick
Is the form of the enclosure supposed to resemble the attachment 'new 3d case 1qs' or are we free to modify the form as long as it fits in with guidelines stated on 'Ninja outlines rev6'
Regards,
Nick
The alpha board will be on top of the panda board this way we dont make the case thick.
The bezel doesnt fit by screws. We will use double stick tapes to get attached with the back side
The bezel doesnt fit by screws. We will use double stick tapes to get attached with the back side
Hi There
Could you show more detail about where the alpha board is fitted and where you wish to have the sockets and USB port.
Do you wish the bezel to be secured by screws from the back.
Best Regards
Neil@Dual2
Could you show more detail about where the alpha board is fitted and where you wish to have the sockets and USB port.
Do you wish the bezel to be secured by screws from the back.
Best Regards
Neil@Dual2
Similar Contests on Cad Crowd
Track setter
Transfer sketch to drawing, make a color 3D model
Light duty telescoping mechanizm
This is constest for a telescoping mechanism with the following parameters.
It needs to lift about 3 lbs straight up across a range of from 2ft -5ft with a travel speed of 6"/second both up and down.
There will be bundle of wire running up the inside of the tubes probably about the size of a usb cable and some 3-4 servo extension cables.
All custom parts should be designed to be fabricated on either a makerbot, laser cut out of 1/8" thick material, or exsisting off the shelf components.
The tubes of the telescoping mechanism should be from these square polycarbonate tubes (1/2", 3/4", 1"). http://www.mcmaster.com/#3161T21
The bottom of this device and the motor that drives it will mount to a plate of 0.20" aluminum.
Please find a motor which is available for order in the USA.
The motor should be either a 24vdc or 5vdc servo.
Sketch to CAD to 3D model Conversion - Wine Cradle
I need someone to turn my sketches into a CAD drawing and then into a 3D model. To determine the winner of the contest I will consider the best conversion of Sketch #1. After a winner is selected, please be able to complete the entire process in 5 business days.
3D Pump Design with Cadworx Software
The design is required for internal use for our EPC company.
The CAD design block needs to be made in native Cadworx format.
die design
I wish to learn the design of simple dies for sheet metal stampings using Proe and autocad.
umang.201078@gmail.com
rahul19dj
Buyer