Pennybandz Shark Head Pendant
in
Jewelry Design
held by
pennybandz and pickbandz
Last seen:
2017-09-21 16:26:40
Contest Ended, Winner(s) have been selected.
Description:
Please see attached picture (necklace.jpg) of our standard pressed penny holding pendant. This project is to modify the pendant to look like a realistic shark with it's mouth open holding the pressed penny (shark pendant.jpg). I have attached a model that was made for us but it looks too toy/cartoon like (shark mouth). We are looking for a realistic design...NOT a cartoon looking shark head.
Wants:
The pendant will we made of 100% silicone. It will be a solid gray color with black ink rubbed on it to highlight the details (it will have a patina look). Please see attached images to understand the basic proportions needed. It still needs to be able to hold the pressed penny and show the design of the penny once inserted into the mouth of the shark.
Don't Wants:
No extra colors (just gray with black highlights). Do not give it a cartoon look.
No design is needed on the back of the pendant. It will be flat like our standard design.
Software:
- AutoCAD (stp)
Prepaid Prize
Entries
#10 Shark head - pendant base
by Vedran Starcevic
Hi...like promised I'm submitting the base shark head design - it's modeled like the real shark head, with all detailing (eyes, gills, teeth,gums,...) and it can be transferred to pendant if this is shape you are looking for. To use 3D pdf attached, open it in Acrobat reader, left click object inside and it will become active (you can rotate, zoom, change color, lighting,..)
Feb 14, 2016 16:13
#12 Shark Pendant
by J.Osechas
Modeled as close as possible to the picture. Any comments or modifications please inform.
Feb 14, 2016 19:18
#23 Shark Head Pendant
by SaketCad
Download Files
Modelled & Rendered in Solidworks
Feb 19, 2016 16:43
#2 Shark head pendent
by PULKIT JAISWAL
Declined
This shark headed pendent designed by me is simple and a side view of a shark with open mouth.
kindly consider it.
thanks!
kindly consider it.
thanks!
Feb 11, 2016 17:40
#26 Realistic Mako-shark-head pendant
by Raj Koushik M
Declined
The pendant is designed to be as realistic as possible. It has been checked that the width doesn't exceed 6.5 mm. Also the highlights have been provided. adequate spacing is given for the penny to be place.The hole for passing the rope through is concealed behind the shark nose. Hope it helps. Thank you
Feb 20, 2016 15:43
Discussion
Showing last 20 comments - View All
Bravo,
go there ... well done my freind .
go there ... well done my freind .
Hi Reda my friend,
This is my second contest Ive join and become a winner make me feel excited for upcoming contests :)
This is my second contest Ive join and become a winner make me feel excited for upcoming contests :)
Hi all,
Thanks to pennybandz and pickbandz, special thanks to Albert for choosing my model as winner. I will upload my model entry in my portfolio to share with others.
Thanks again.
Regards,
BRAVO
Thanks to pennybandz and pickbandz, special thanks to Albert for choosing my model as winner. I will upload my model entry in my portfolio to share with others.
Thanks again.
Regards,
BRAVO
BRAVO , BRAVO Bro ;)
Dear sir, may i know how the pendent design ( <img src="/showimage.php?cid=1297&num=26&img=small.jpg" alt=""> ) should have been made better? would help me for further designs. Thank you
Thanks to all the designers for submitting their incredible work. We will be selecting a winner tomorrow morning,
Bravo went from nothing to designer rank 20 in less than a week of joining CadCrowd with no contest wins. Amazing !
<img src="/showimage.php?cid=1297&num=19&img=small.jpg" alt=""> The teeth need to look like actual shark teeth...Mako Shark. Add more teeth and increase the size of the teeth. Not rounded looking teeth.
Extend the fins to be longer.
Extend the fins to be longer.
<img src="/showimage.php?cid=1297&num=14&img=small.jpg" alt=""> We want it to look like a mako shark head.
http://www.saltwatersportsman.com/mako-shark-fishing-southern-california
http://cdn.grindtv.com/wp-content/uploads/2014/07/Mako.jpeg
http://www.saltwatersportsman.com/mako-shark-fishing-southern-california
http://cdn.grindtv.com/wp-content/uploads/2014/07/Mako.jpeg
<img src="/showimage.php?cid=1297&num=17&img=small.jpg" alt=""> We want it to look like a mako shark head.
http://www.saltwatersportsman.com/mako-shark-fishing-southern-california
http://cdn.grindtv.com/wp-content/uploads/2014/07/Mako.jpeg
http://www.saltwatersportsman.com/mako-shark-fishing-southern-california
http://cdn.grindtv.com/wp-content/uploads/2014/07/Mako.jpeg
<img src="/showimage.php?cid=1297&num=14&img=small.jpg" alt=""> This is getting close:
1. add the back to the pendant...see our standard pennybandz pendant.
2. give the finish a matte gray silicone finish (no shine) just a little shading
3. We are going to have the teeth painted so add white to the top of the teeth
4. round out the bottom jaw a little and add a little more to the bottom of the jaw, The tail of the pressed penny needs a little more room to fit inside the pendant,
5. for the side pectoral fins make the top and bottom flat not rounded and extend the length a little.
Thank you,
Albert
1. add the back to the pendant...see our standard pennybandz pendant.
2. give the finish a matte gray silicone finish (no shine) just a little shading
3. We are going to have the teeth painted so add white to the top of the teeth
4. round out the bottom jaw a little and add a little more to the bottom of the jaw, The tail of the pressed penny needs a little more room to fit inside the pendant,
5. for the side pectoral fins make the top and bottom flat not rounded and extend the length a little.
Thank you,
Albert
Hi Albet,
You tell me it 's almost that you ask me correct after you decline my design !!! You do not want any other colors and allow designs with other colors than gray !! Where is the second row of teeth in the chosen designs ? It is doubtful that any ... weird
You tell me it 's almost that you ask me correct after you decline my design !!! You do not want any other colors and allow designs with other colors than gray !! Where is the second row of teeth in the chosen designs ? It is doubtful that any ... weird
<img src="/showimage.php?cid=1297&num=1&img=small.jpg" alt=""> Hi Adam...Please see (shark pendant edits for adam.jpg) Please make adjustments and resubmit.
Thanks,
Albert
Thanks,
Albert
****The penny will be slightly inside the throat of the shark so all the teeth will be showing. The inside of the throat will have the notch and frame to hold the penny in place.
image has been re-uploaded
Please re-upload the latest picture. It can't be downloaded
****************Please look at this new file to get the best example of what we want the pendant to look like. (use-this-image-for-modeling.jpg).
MAKO SHARK
MAKO SHARK
Max thickness of pendant is 6.5mm.
What is the max thickness you're willing to accept?
<img src="/showimage.php?cid=1297&num=5&img=small.jpg" alt=""> This is getting close but we still want a realistic sculpted look (more teeth, bigger rounder eyes, wrinkles, gum line around mouth...etc. Remove the eyelet for the necklace. There will be a hole going through the sharks nose for the rope to pass through. More rows of teeth and and more natural looking,,,different sizes and angles of the teeth...see new attachment (sharkpendantoverlay.jpg)
Similar Contests on Cad Crowd
Kid/Cosplay Jewelry sets
Looking for sets of jewelry (bracelet, earings, rings and possibly tiara) that would appeal to both a 5 year old and a 40yr old that might be into Cosplay. Geometric shapes preferred
Eyewear designer wanted
Hello everyone! I'm looking to get in touch with talented and fresh eyewear designers. Designs should be in 3D and possible to produce with 3D printer. Any form of collaboration is open to discussion. Interested yourself or know exactly who I should talk to? Please let me know. Thanks!
Need ArtCam artist for jewelry design
We need an experienced artist to create designs in ArtCAM for our 3D prototypes for our jewelry line.
This contest is for 1 original prototype design but it will be a full-time ongoing freelance project if you are interested and available.
Antimatter Lighter Case/Necklace - Shapeways 3D Print - Tritium Vial
What's up!
I just came up with a pretty sick idea to encase a lighter in a 3D printed steel case with an embedded Tritium vial and attachment for a necklace chain.
If this isn't an interesting project, I don't know what is! Hopefully there will be a lot of submissions showing a variety of styles.
Design a nice ear ring
Should look good
REDA
Designer