Floor plan for remodel of home drop zone, gourmet kitchen, powder room, pantry

in Interior Design held by Emily
Contest Ended, Winner(s) have been selected.
Description:
Looking to remodel the kitchen with a large rectangular island, add a walk-in pantry, add a large drop zone from garage entry, and probably move powder room. Basement is unfinished so plumbing can be moved. Will minimally bump into the garage not to impede on parked car space. Would like powder room to be small like the attached example. Kitchen appliances to be 48" range top, double wall ovens, and 48 inch counter depth fridge. Possibly a second prep sink if room permits. Laundry room can be reconfigured and hall closet removed, but need to leave plenty of counter/working space in laundry room. Duct work runs up next to steps but only takes up small part of allotted space, even smaller than the second level duct plan reveals.
Wants:
Two dimensional floor plan is adequate, 3D not necessary. The island should be at least 9 ft by 4 feet and the main sink placed in the island. Range should be the centerpiece in a bank of cabinet space. The space into the pantry can be a doorway with rear cabinetry, making it look like an entrance to another room. Take up as little garage space as is needed to complete the objective, still want room for tools, lawnmower, etc.
Don't Wants:
Don't bump into the hearth room, great room, or dining room space. Also don't move steps. The dinette needs to stay approximately the size it currently is.
Ask for Sample:
I really don't care what software program is used, I just want a pdf because I don't have any design software

Entries

1st Winner
#5 Omaha, NE, For Emily by Amir Gazar
Dear Emily,
Two files has been attached for your convenience, If you think any further changes is needed do not hesitate to contact us.
Best regards,
Amir Gazar
Melbourne, VIC
more
Feb 5, 2016 6:33
#1 KITCHEN-PWDR FLOOR PLAN REMODEL by Adam
Initial design for review. Work in progress on utility room.
more
Jan 31, 2016 16:06
#2 Plan by ProtoTech Workbench
Feb 1, 2016 12:57
#3 KITCHEN REMODEL by DBARN
KITCHEN REMODEL - LEAVE LAUNDRY AND HALL CLOSET AS IS, TAKE IN 10" ON BACK WALL OF GARAGE
more
Feb 1, 2016 20:52
#4 Kitchen Remodel by PDX Detailer
Plan of new kitchen layout
more
Feb 3, 2016 17:51

Discussion

Amir Gazar

Designer

Fri, 05 Feb 2016 06:34:15 +0000
Dear Emily,
I submitted the project, If you think any further changes is needed do not hesitate to contact us.
Best regards,
Amir Gazar
Melbourne, VIC

Emily

Buyer

Fri, 05 Feb 2016 01:29:18 +0000
Amir,
No second floor plans needed. Thanks! I posted an attachment of a rough draft on a plan I had sketched out, but it needs work.

Emily

Buyer

Tue, 02 Feb 2016 16:16:21 +0000
Amir,
I'm sorry, I don't understand what you are asking... Could you elaborate?

Amir Gazar

Designer

Tue, 02 Feb 2016 08:24:11 +0000
Hey Emily,
I was just wondering if I have to give the second floor plan as well or no?
Best regards,
Amir

Emily

Buyer

Tue, 02 Feb 2016 05:34:44 +0000
Kreeshtin, The remodeled area including the garage will be great. I do need the floor plan to scale with dimensions. Also, if you see where the cars park, there is a large triangular wedge of room that can be used for additional pantry or drop space if necessary. Thanks!
Mon, 01 Feb 2016 14:21:49 +0000
Hello Emily,

Please let me know if there is something it should be changed on the work I've submitted.

Thank you,
Paula
ProtoTech Team
Mon, 01 Feb 2016 11:15:28 +0000
Hi, Emily
It's interesting contest. I'm working on it.
Kind regards,
Elen

Adam

Designer

Mon, 01 Feb 2016 04:17:58 +0000
Junard Mancio, that is against the CadCrowd terms and is dishonest. Do you have any morals ?

Emily

Buyer

Sun, 31 Jan 2016 14:18:23 +0000
Hello!
Thanks for your response. I have already pre-paid for the contest, so if you would like to put together a great plan and submit it that would be great!
Thanks,
Emily
Sun, 31 Jan 2016 13:39:16 +0000
Hi! I am currently working on the floor plan but I have a few questions:

1. For the final PDF, would you like the entire main floor plan or just the area that will be remodeled?
2. Do you need the floor plan to scale with dimensions?

Let me know, thank you!

Similar Contests on Cad Crowd

Midcentury Modern Home interior design
Front of the house is newly constructed with high ceilings and modern look. The back of the house is midcentury eichler style. Requires design for the following of the entire house: 1. lighting and lighting fixtures 2. wall color, finish, decorations 3. furniture layout 4. flooring finish
HELP ME DESIGN MY PET SHOP!!!! Needed ASAP!!
Please see attached files for pictures. Size of rooms will be edited shortly. Looking for what the ideal shop will look like. The store name above entrance (Pet Stop) and plants or decor outside entrance to appeal to customers. Cashier location: Inside entrance left side wooden floor. Right side inside wall entrance with the first two doors and windows to be knocked down and have a big open space. In the open area should be isles for products: Pet beds, Food, tanks, cages, pet care supplies. Decor on the walls or hanging from ceiling. The left back of the shop for a grooming room. Design a room on other side of wall on the left side adjust from back corner.
double story house in kazakhstan
Hello, I would like to hire you to do an interior design for me for a double story house in Kazakhstan. I can provide you the floor planing with the details. I need an outstanding interior designer to design a beautiful house for me which I believe you are capable of.
Justins Barber Shop
Create a modern Barber Shop 20x80 One Bathroom, Stations, Lighting, Electric, Millwork, Finishes, Signs, all for Virtual Tour in marketing new franchise.
shop concept
i want to create a boutique special for bride and evening dresses, include also small section for shoes,bags and accessories. the boutique is for fashion designer and need to be as a concept to open many shop in different size in same concept products are ready inside,,lcd screen, katalogue,,design ready and under customize. colors likes :black,silver,white need to make on 3d cad..to be real with dimension to apply for many sizes