Chocolate Alphabet templates
in
General Design
held by
ChocolateTraders
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We are a chocolate factory in New Zealand and need 3D graphpis of each letter in the alphabet - 26 letters and numbers 0-9. We are replacing our current letters with a newer modern typeface. The graphics will be printed with a 3D printer. The letters will be used to make plastic molds so chocolate can be poured into them. The most important thing we need to ensure is that there is an angle on each letter so that when turned into a chocolate mold the chocolate comes out of the mold cleanly and easily. A picture of the letters we use currently is attached for reference.
Wants:
The letters should be 100 mm in height with a depth of 12 mm, width proportional to the height. The angle needs to be approximately 7 degrees.
Ask for Sample:
Yes we need a sample in 2 different fonts please see attachment for details. Sample needs to be provided as an STL file
Software:
- Trimble SketchUp (Google)
- AutoCAD
Prepaid PrizeEntries
1st Winner
#76 dinblack/cooperblack_numbers_capital_and_lowercase
by BL
Download Files
Jun 25, 2015 18:48
#65 Chocolate Alphabet with Letters & Numbers in both fonts
by rahulsonawane
Download Files
Jun 23, 2015 9:59
#11 SWISS LETTERS
by DBARN
Declined
Download Files
- AutoCAD — SWISS-0
- AutoCAD — SWISS-1
- AutoCAD — SWISS-2
- AutoCAD — SWISS-3
- AutoCAD — SWISS-4
- AutoCAD — SWISS-5
- AutoCAD — SWISS-6
- AutoCAD — SWISS-7
- AutoCAD — SWISS-8
- AutoCAD — SWISS-9
- AutoCAD — SWISS-A
- AutoCAD — SWISS-B
- AutoCAD — SWISS-C
- AutoCAD — SWISS-D
- AutoCAD — SWISS-E
- AutoCAD — SWISS-F
- AutoCAD — SWISS-G
- AutoCAD — SWISS-H
- AutoCAD — SWISS-I
- AutoCAD — SWISS-J
- AutoCAD — SWISS-K
- AutoCAD — SWISS-L
- AutoCAD — SWISS-M
- AutoCAD — SWISS-N
- AutoCAD — SWISS-O
- AutoCAD — SWISS-P
- AutoCAD — SWISS-Q
- AutoCAD — SWISS-R
- AutoCAD — SWISS-S
- AutoCAD — SWISS-T
- AutoCAD — SWISS-U
- AutoCAD — SWISS-V
- AutoCAD — SWISS-W
- AutoCAD — SWISS-X
- AutoCAD — SWISS-Y
- AutoCAD — SWISS-Z
- AutoCAD — SWISS LETTERS
May 27, 2015 15:26
Discussion
Any update?
Hi ChocolateTraders,
Is there any possibilities that you might end this content earlier...before the dateline?
I would like to make resubmission ...maybe around 24th June...
Is there any possibilities that you might end this content earlier...before the dateline?
I would like to make resubmission ...maybe around 24th June...
Are you able to upload an STL file of the A please. 
this is a nice typeface but it's not suitable for chocolate letters as its too narrow and light 
Zest you can convert your all model into ZIP format.
Best,
Ridwan S
Best,
Ridwan S
There is totally 50 above models i want to transfer to cad crowd one by one... Is there any Easy way to do that
?>
?>
Zest !3laster :
isn't doing that against the CADCROWD rules ? make an entry with the files like the rest of us and give the Buyer to see them and pick the one he really wants. Don't send him files to force him to pay you, "now that he has your files", or to contact him outside cadcrowd and offer him deals, By entering this contest with files attached to the entry the client can check the files and be sure of the quality, that is what cadcrowd is about, the guarantee of quality and fair play. I wonder how many designers respect the rules....
isn't doing that against the CADCROWD rules ? make an entry with the files like the rest of us and give the Buyer to see them and pick the one he really wants. Don't send him files to force him to pay you, "now that he has your files", or to contact him outside cadcrowd and offer him deals, By entering this contest with files attached to the entry the client can check the files and be sure of the quality, that is what cadcrowd is about, the guarantee of quality and fair play. I wonder how many designers respect the rules....
I HAVE DONE ALL LETTERS AND NUMBERS, PLEASE TELL ME YOUR EMAIL ID, I WILL SEND YOU ALL THE FILES YOU NEED IN .STL FORMAT
Dear Sir Chocolatetraders,
Could you give some ratings for our design here, so we can improve our model so our model met your requirements.
Best Regards,
Ridwan S
Could you give some ratings for our design here, so we can improve our model so our model met your requirements.
Best Regards,
Ridwan S
please kindly to put comments about my design https://www.cadcrowd.com/entries/1082-1830-chocolate-alphabet-templates Best Regards,
Ridwan S
Ridwan S
1. Can we use general font? or must create new font charateristic?
2. How much degrees of angle for mold that's recommended for chocolate? 7 deg or less ?
2. How much degrees of angle for mold that's recommended for chocolate? 7 deg or less ?
The need to be individual moulds - (a)
how do you want the mould/stencil to be design?
a) Individual mould/stencil
b) All characters into single mould/stencil
a) Individual mould/stencil
b) All characters into single mould/stencil
Yes I only need the letters in capital letters.
Hi, Please wait for my entry
Thanks
Thanks
Hi,
The alphabet will be in capital letter or you need small letter as well?
Thanks
The alphabet will be in capital letter or you need small letter as well?
Thanks
Similar Contests on Cad Crowd
Cellphone Stand
Searching for a designer to build a 5x6x6 inch cell phone stand that can be printed on a 3-d printer.
We have a design made out of Legos. Would like designer to convert Lego stand into a 3-d model on the computer.
Freelancer should be interested in job because it's exciting! We're very easy to work with :). We have the specs already figured out, so iterations should be minimal.
Canadabs Beaver Box
An electronics box with 3D design.
I have attached photos of a design i currently have but would like to add 3dimension to the beaver, As you can see in the photo it is only 2D and change the access cover to be the top of the box oppose to bottom to allow for easier printing.
Ridwan Sept
Designer