Medical Device Enclosure – Fingertip Pulse Oximeter, 2-Shot TPE Pads, Hinge (PULSE Concept)

Concept project: a clip-on SpO2 and heart-rate reader. Two drafted shells on a sprung pin hinge, soft TPE finger pads molded in as a second shot, an OLED readout and a rechargeable cell. What is in the model - 58 × 34 × 36 mm; 2 shells, 2 pads and 6 internal parts - PC/ABS shells, TPE 40A pads, 2-shot injection molding - 1.6 mm walls, 2° draft; jaws open 20° Design for manufacturing (DFM) - Pads molded straight into each shell as a second shot: no glue, no gap for dirt, one less assembly step - Red/IR LED and photodiode face each other across the Ø16.6 channel, with the pads keeping ambient light out - Ø2 steel pin and torsion spring through three knuckles: press the tail and the jaws open 20° - OLED, window and button all assemble into the top shell, so it can be tested before closing Checked in CAD - 0.000 mm³ interference across 20 pairs, closed and open at 20° - Draft measured per triangle: 96% of the lower shell at 2° Included: STEP files, drawings and colourway renders. Services this shows: medical device enclosure design, 2-shot and overmold design, injection molding design, hinge design, DFM review.
medical-device enclosure-design pulse-oximeter 2-shot-molding tpe-overmold