Crossfire nano rx set D30mm

Universal Mount for the TBS Crossfire Nano RX SE and Immortal-T V2 This specialized mount is designed for the reliable and secure installation of the TBS Crossfire Nano RX SE receiver and its Immortal-T V2 antenna on an FPV drone frame. It combines electronics protection and convenient antenna mounting in a single, monolithic housing. Key Specifications and Design Features 1. Design and Functionality This multifunctional mount addresses three main objectives: Receiver Protection: It forms a rigid case around the TBS Nano RX SE receiver, protecting it from mechanical damage during crashes and collisions. Antenna Mounting: It features a built-in mount for the TBS Immortal-T V2 antenna, which secures it in the optimal vertical position for the best signal reception. Frame Mounting: A universal clamp is located at the bottom, allowing all mounting components to be securely fastened to the drone’s frame tube. 2. Modularity and Accessibility The mount features a modular design that simplifies installation and maintenance: Detachable housing: It consists of two main parts (the housing and the clamp) that connect to each other. This simplifies the installation of the receiver and antenna. Access to components: Despite its enclosed design, the mount provides easy access to the antenna connectors and the receiver’s power connector. 3. Ergonomics and Aerodynamics The mount has a streamlined shape that minimizes aerodynamic drag. All corners are rounded and the surfaces are smooth, which also reduces the risk of snagging on obstacles. Technical Details (Specifications) Purpose: Mounting the receiver and antenna. Compatibility (Receiver): TBS Crossfire Nano RX SE. Compatibility (Antenna): TBS Immortal-T V2. Antenna Type: Vertical. Mounting Method: Clamp for attachment to a tube. Number of Parts: 2 (Housing, Clamp). Material (Recommended): Rigid thermoplastic (e.g., PETG, ABS, ASA) for stiffness and strength. TPU (thermoplastic polyurethane) can also be used to increase flexibility and shock absorption, but it may be less rigid. 3D Printing Type: FDM (FFF). Tube Size (for the clamp): [Specify the exact diameter in mm, e.g., 12 mm]. 3D Printing and Assembly Recommendations Print Orientation: [Describe the optimal print orientation to minimize support structures and ensure strength]. Support Structures: It is recommended to use supports for the bottom of the housing and the clamp. Layer Height: 0.2 mm or 0.24 mm. Infill: 15–30% (mesh or gyroid). Assembly: Place the Immortal-T V2 receiver and antenna inside the housing. Slide the clamp onto the drone frame tube. Secure the housing to the clamp using screws. Tighten the screws to securely fasten the mount to the frame. This mount is a reliable and convenient solution for setting up the communication system on your FPV drone, ensuring protection and optimal performance of the receiver and antenna.