CHILL: 750 ml Vacuum-Insulated Bottle, Double-Wall 304 Stainless, 2-Start Lid

CHILL is a 750 ml vacuum-insulated bottle concept, designed for deep drawing, spinning and welding. What I designed: - 0.5 mm 304 inner cup, deep drawn, inside a 0.6 mm 304 outer shell, with a constant 3 mm vacuum gap - One rolled lip at the neck where the two walls are welded and evacuated - 2-start neck thread at 8 mm lead, so a quarter turn compresses the silicone gasket - PP lid with 36 grip flutes and a TPE carry loop molded on, so there is no pin or extra part - Fill height solved from the CAD cavity: 750 ml at 224 mm, 777 ml to the brim Checked in CAD: - 0.000 mm³ interference between shells, thread, gasket, lid, loop and the water volume (a 185 mm³ overlap between the lid skirt and the neck lip was found and cleared) - 165 ml vacuum jacket measured from the solids - Dimensioned GA drawing with section and fill line, exploded and section views, three colourways Size: Ø75 × 298 mm.
product-rendering water-bottle stainless-steel deep-drawing drinkware