Bike Phone Mount – 3D Printing Design, Print-Ready STL & STEP, No Supports (GRIP Concept)
Concept project: a bike handlebar phone mount designed to print on any FDM printer with no supports. Two parts slide together on a dovetail with tolerances that fit on the first print.
What is in the model
- Clamp for Ø22–32 mm bars and a cradle for phones 68–80 mm wide
- 2 printed parts and 1 M5 thumbscrew with a captive hex nut
Design for 3D printing
- No overhangs past 45°, so it prints clean with no supports
- 0.3 mm dovetail clearance: slides together on the first print, no sanding
- Teardrop M5 hole that prints across the layers without support
- Captive hex-nut pocket, so tightening needs no tools
Checked in CAD
- 0 faces need support in print orientation
- 0.000 mm³ interference between clamp and cradle
Included: STEP and STL files, ready for any slicer or CAD package.
Services this shows: 3D printing design, design for additive manufacturing, FDM print-ready parts, STL and STEP files, product prototype, 3D product modeling.