Hire Manuals and Documentation Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY ! Read more

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy... Read more

I am a Product and Mechanical Designer. Much of my career is involved in computer aided design of components for the aerospace, transportation and medical device industries. I am also a US Navy veteran.   While working at United Launch Alliance (ULA) I supplied 3D CAD models from the engineering group to the tooling supplier enabling concurrent design of manufacturing tooling. I also supported the ordnance group by designing a stage separation component test stand.   I have also designed more than 450 FAA certified components for the Adam A500 aircraft. I find that wherever I have worked, I bring three key strengths to the table: CAD expertise, component design and invariably I have gained a reputation as the GoTo guy to support high value projects.   I have a passion for designing products that are making a positive impact on the environment. On my personal time I have designed concepts for Smoker, furniture and environmentally friendly lawn and garden power equipment. I am looking for a position that uses my skills, experiences and passion for product design to support your engineering group.

I work for a small research and development company as an engineer. In this role I do a plethora of jobs depending on the project. In the most recent project I was in charge of designing,... Read more

I work for a small research and development company as an engineer. In this role I do a plethora of jobs depending on the project. In the most recent project I was in charge of designing, drawing and dimensioning secondary components for an engine our client needed. This evolved into the development of a viable test bed for this engine. This also included the creation of an acceptance test plan as well as a technical manual for assembly. My goal is to develop and design what you need in a timely manner while keeping to the requirements set forth by you. I and open and happily work with other freelancers if needed I look forward to hearing from you.

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and... Read more

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed electro-mechanical products, machinery and systems for a wide variety of industries. Generated winning proposals and developed customer relationships. Innovative conceptual designer. Inventor of patented industrial machinery products. Solid track record leading profitable new product development. Registered Professional Engineer. Specialties: Machine designer with proven abilities to drive innovative new product development

4 years’ experience at a Danaher Co-op out of Valencia, CA Product Design in Solidworks: - Industrial Control Panels - Industrial Cabinet Enclosures - Embedded Controllers - Name Brand... Read more

4 years’ experience at a Danaher Co-op out of Valencia, CA Product Design in Solidworks: - Industrial Control Panels - Industrial Cabinet Enclosures - Embedded Controllers - Name Brand PLC's Solutions - Analog and Digital Circuits for Sensing and Control - Wire Harnesses - Compliance conscious of cULus, CSA, CE, IEC, Quality Engineering Support: - ISO9001 Experience - Develop Customized Test Methods - In-Process Poka-Yokes - Specialized Jigs and Fixtures - Audit Outside Processes Resource for Organizational Development: - Data-driven action plans to improve Standard Work and Lead Time Reduction - Support the preparation for Kaizen Events (Pre-Event) or assist the completion of action items (Post-Event) - Document new manufacturing processes, methods, and equipment requirements into appropriate PAAG (Process at a Glance) or ISO required documentation - Implement changes to products and processes - Maintain regulatory compliance and certifications

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of... Read more

I'm mechanical engineer with experience in component and system design, manufacturing, and product testing. 3D modeling, 3D printing, and rapid prototype development are some of my areas of interest, and where I am focusing my time. I love sports, learning about new technologies, and spending time outdoors with my family.

About: Aloha, my name is Stu! I am a user experienced focused product designer and systems engineer addicted to creating products and services that will change the world. I am always on the hunt... Read more

About: Aloha, my name is Stu! I am a user experienced focused product designer and systems engineer addicted to creating products and services that will change the world. I am always on the hunt to be apart of projects and teams that will create massive change and potentially impact over a billion lives. My personal mission is to create world class experiences through exponential technology that empowers the lives of over one billion people to achieve their greatest potential. Experience & Differentiation: Electro-mechanical/Mechatronics design Consumer product development IOT Product Development Drawing/Drafting and manufacturability for mass production International & domestic (US) manufacturing User Experience Focused Industries Served: Health and fitness, breweries, medical device manufacturing, ice sculpting, immersive entertainment, solar energy sector, and sailing. Design Skills: 3D Modeling, Injection molding, sheet metal, machining, weldments, aluminum extrusion, assembly, 3D printing, BOM Management, Design for Manufacturability and User Experience, DFM Preferred CAD Software: Solidworks I look forward to meeting and working with clients that share the same passion to change and impact the world through new product development.

Research and Development engineer with a background in medical and non-medical device design, production, testing and usage. Read more

Research and Development engineer with a background in medical and non-medical device design, production, testing and usage.

Professional engineer with fourteen years of experience in the manufacturing and design sector. Great ability to organize and manage projects with a success driven, team-oriented attitude.Well... Read more

Professional engineer with fourteen years of experience in the manufacturing and design sector. Great ability to organize and manage projects with a success driven, team-oriented attitude.Well rounded engineer with a creative approach to problem solving and design.