Hire Mechanical Assemblies Designers in United States

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I... Read more

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I currently have access to the following programs: -SolidWorks (2017) -AutoCAD (2017) -Photoshop (CS2) My core skill set is SolidWorks which extends 4 years and I have the ability to work using the tools below: -Photoview 360 (Rendering) -Surfaces -Sheet Metal -Weldments -Molds -Sketches -Animations (motion studies) -Complex Assemblies -Converting conceptual data to computer models -Product design & Development -3D Modeling and Rendering AutoCAD I am working extensively to obtain a higher skill set to progressively take on more complex and difficult Problems. General skill set is listed below for AutoCAD: -2D Archtecture -2D Park/landscape Layouts -Satellite image to AuoCAD -Layer Management -Custom Template/Drawings Photoshop skills are limited to essential photograph manipulation and digital art. Being entree level, I seek to work hard on your projects for very low cost to benefit you as well as well as use the opportunity for improvement in the Engineering / Manufacturing field. I am excited and will love to assist on any of your projects as I would put the same level of attention into them as I would my own. Please view my personal website / portfolio to view examples of my past work to give you a better understanding of my qualification. I look forward to working with you. Thank you, Cameron Ross

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes. Read more

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus... Read more

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in materials and machine design and specializes in custom mechanical assemblies and automated systems. Specific capabilities include mechanical and electromechanical design, CAD, FEA and design validation, component and assembly manufacturing, procurement, assembly, and testing. Dietrich worked as a Systems Engineer, mechanical engineer, and sr. mechanical engineer. He has developed custom tooling for unique and specific projects. He has designed and manufactured a large scale metal 3D printer. Additionally he has designed equipment for automating processes to speed up manufacturing or reduce labor intensive applications. Dietrich is able to design with a wide variety of materials including alloy steels, aluminum, Inconel and other nickel-based alloys, carbides, and a wide variety of polymers. He has experience with mechanical systems such as linear actuators, miniature and large scale electric motors, combustion engines, pulleys, gears, solenoids, weldments, belts and other drivetrain components. His manufacturing capabilities include CNC milling, CNC turning (lathe), electro-discharge machining, welding, and 3D printing in both polymers and metals. Deliverables include consultation, design, CAD models, 2D manufacturing drawings, manufacturing of custom parts and assemblies, sourcing and selection of off-the-shelf parts, and component and assembly testing and validation.

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update... Read more

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update company CAD Documents to Industry Standards, and lead our team in a positive and innovative direction within ECR/ECN meetings. ● 10+ Years Work experience with 2D/3D AutoCAD & SolidWorks; Designs including, but not limited to, Mechanical, Electrical, Fuel Cell Battery, Automotive, Carriers, Conveyors, Piping, HVAC, Structural Steel, Hanging Steel, Conveyor Platforms, Automation, Robotics, Powder Coating, etc. ● Associate degree in Computer Aided Mechanical Design (2012), 8+ Years of CAD and engineering course work, and four years of collegiate level course work experience in AutoCAD and SolidWorks. ● Was given the role of Lead Engineer/Draftsmen in past employment on several different projects and was tasked with supplying full design and install drawings for the customer, some of which included Tesla Motors, Dearborn Mid-West, Kuecker Logistics Group, Chrysler-Windsor, etc. ● Was given the role of Project Engineer in past employment and was tasked with keeping track of all job processes (material flow, project delivery time, etc.), while also designing and checking all CAD drawings that went into fabrication. ● Strong attention to detail with computer programs and drawings; adapts easily to new project concepts and innovative technology. ● Well organized and detail-oriented, with a proven ability to manage time effectively and improve workflow. ● Strength in following directions, analyzing, guaranteeing customer satisfaction, and completing tasks on time.

• 35 years of experience in product design including manufacturing and consulting • experienced Solidworks and Creo (ProE) user Read more

• 35 years of experience in product design including manufacturing and consulting • experienced Solidworks and Creo (ProE) user

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have... Read more

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have formal training and on the job training in 3D design and CNC programmingand machining.

Versatile engineer with design, manufacturing, and project management skills seeking opportunity to develop products from concept to completion. Experienced with injection molded plastic part... Read more

Versatile engineer with design, manufacturing, and project management skills seeking opportunity to develop products from concept to completion. Experienced with injection molded plastic part design, 3D printed additive manufacturing, and electromechanical assemblies. Adept at creating process documentation, informational graphics, and training presentations. Core Strengths and Expertise: > Product Development > Injection Molded Plastic > SolidWorks > DFM and DFA > DFAM (Additive manufacturing and 3D printing) Achievements: > Re-engineered consumer product making it stronger, easier to mold and assemble, as well as, incorporating new features. Sales volume of new version increased by 300%. > Cemented relationship with major customer by developing fourteen new part designs, creating more than sixteen new product versions, and managing the construction of eleven injection mold tools. > Partnered with The Coca-Cola Company to deliver innovative post-mix valve from prototype to production. Tracked progress of 5 manufacturing sites, 4 test labs, 16 outside vendors, and 10 engineers to ensure product met performance and reliability standards. > Developed medical sharps disposal bin and accessories with functional improvements and backward compatibility with existing product line. > Increased production capability of complex battery back-up unit by 125% with design update and process modification. > Improved reliability and reduced cost of new printer with a patented index sensor, which took advantage of new technology to replace a complicated mechanical linkage.

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more... Read more

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more detailed summary. SUMMARY OF EXPERIENCE • 5 Years’ experience in the following fields below.• Junior Electrical Engineer, and 3D Drafting and design specializing in Offshore and Hazardous Location Environmental Control Units, Air Conditioners, Pressurizers, Gas Scrubbers, and Purge Units.• Time served in both electrical engineering and in a production factory setting as well as field service work performing trouble shooting, installation, and maintenance of electrical and HVAC systems.• Onsite with the end user and customers during their Factory Acceptance Testing and Evaluation.• Designing and Balancing brand new refrigeration systems.• Extensive experience in examining and testing elements of electrical systems to locate and troubleshoot faults with Electro-Mechanical, PLC, and VFD controls.• Proficient in installing new and modified electrical wiring and devices.• Technical sales experiences when speaking face to face with customers usually resulting in quotes and/or estimates to be generated.• Hands on experience in performing predictive and preventive maintenance.• Highly skilled in installing and wiring motors and motor control devices such as disconnects, relays, contactors and VFDs.• Thorough knowledge and understanding of applied trade practices and techniques such as NFPA 496, NEC 500, NEC 505.• Computer Skills include but not limited to all of Microsoft office, SolidWorks 2016, AutoCAD Inventor 2015, AutoCAD 2004-2013, and Adobe Suite.

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical... Read more

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafter and design engineer. He's held the titles of Designer, Drafter, Project Designer, and Sr. Designer. Tripp also serves on the School board in his community as the Board President. Tripp has been married for 20 years and though he and his wife have no children, they have two dogs and a cat that they consider their children. He enjoys taking his wife and dogs camping in their RV whenever he gets the chance.

Born, raised, and educated in Portugal, Europe. Emigrated to the United States in 1985, now an American citizen. Married, two daughters, two grand-daughters. Read more

Born, raised, and educated in Portugal, Europe. Emigrated to the United States in 1985, now an American citizen. Married, two daughters, two grand-daughters.

University of Florida Aerospace Engineering Student Read more

University of Florida Aerospace Engineering Student

Mechanical engineering student with AutoCAD and Inventor experience Read more

Mechanical engineering student with AutoCAD and Inventor experience

I am an experienced and accomplished Mechanical Engineer with four years of on the job experience in the automotive industry. I use multiple CAD modeling software's such as Catia, SolidWorks,... Read more

I am an experienced and accomplished Mechanical Engineer with four years of on the job experience in the automotive industry. I use multiple CAD modeling software's such as Catia, SolidWorks, AutoCad, and Autodesk Inventor. I've been designing production dies for Ford, Chrysler and Tesla.

Machine Designer with 10 years experience designing, building, and installing custom assembly and test equipment. Equipment ranging from simple manual work cells, to part fixturing, to completely... Read more

Machine Designer with 10 years experience designing, building, and installing custom assembly and test equipment. Equipment ranging from simple manual work cells, to part fixturing, to completely automated assembly cells. Experience with leak testing using mass flow, pressure decay, and tracer gas methods.

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk... Read more

I've been doing 2D and 3D design work since 2009. I have experience in a wide variety of fields, such as architectural, mechanical, electrical, and many more. I primarily work with Autodesk Inventor and Autocad but I have experience with other software as well.

Experienced design engineer, have developed components from a variety of materials and processes including: Injection molded plastic, sheet metal assemblies, liquid silicone rubber, stampings,... Read more

Experienced design engineer, have developed components from a variety of materials and processes including: Injection molded plastic, sheet metal assemblies, liquid silicone rubber, stampings, insert molding, custom electrical connectors, Printed Circuit Boards, Flex Circuits. I have spent my entire career developing electro-mechanical assemblies for the Lithium Ion Battery, and Medical Device Industries. I have designed components manufactured in volumes exceeding 1,▒▒▒,▒▒▒ pieces a year, owning the design from prototype to the manufacture of high volume capital tooling.

Born in Phoenix, Arizona I was raised with high work ethic imparted by my many family members in the building community. I received my first associated degree from Glendale Community before... Read more

Born in Phoenix, Arizona I was raised with high work ethic imparted by my many family members in the building community. I received my first associated degree from Glendale Community before relocating to New York City. In New York I gained a wide variety of work experiences, in wich, all culminated in a great understanding of the bottom line in any industry. Later in Austin, Texas, I received my second associate degree in Drafting. There I had the opportunity to apply my leadership and problem-solving skills to grow a business. Through Design and pragmatic thinking I was able to gain the experience to design for the lifetime of a product or space. Today I have found myself back in New York continuing my design experiences and process development as I complete my bachelor's degree.

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible... Read more

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master builder. Shortly after, I joined an architectural firm on which I also developed a taste for construction and its intricacies. I was exposed to everything from blueprints to the production of scale models (maquettes). During this time, I also obtained a certificate as a Solar Project Designer through Censolar. I also worked in plumbing designing water systems for irrigation, pools, residential sanitary water, and a few other projects. My interest in design had just begun and there was a long and interesting road ahead of me. Years later in 2003, I moved to the US where I married my wife, with whom I share a beautiful kid. Moving here opened many doors and I dove into these opportunities head first. In 2004 I joined ACC and attained an AA in Mechanical Design, and from then on I have developed upon that skill. My design exposure since moving to the US has been as follows: * National Instruments, involved in virtual instrumentation design. * Alpha Slip Rings, designing custom commutators for oil drilling, radars, etc. * Sisu Devices, robots and industrial automation. * Biomedical design for Global. * Thermal tooling and mechanical solutions design for Intel, CNC machining, and where I also lead the board repair lab.

10 Years Solidworks Specialist of experience and Solidworks Certified 6 Years of Professional Mechanical Design Engineering Experience 5 Years Creating High-Quality Drawings 4 Years Creating... Read more

10 Years Solidworks Specialist of experience and Solidworks Certified 6 Years of Professional Mechanical Design Engineering Experience 5 Years Creating High-Quality Drawings 4 Years Creating High-Quality Keyshot/Solidworks Renderings 3 Years Finite Element Applications (FEA) experience 2 Years GD&T Experience 1 Year of Rapid Prototyping Experience

Graduate of UC Irvine School of Engineering. Have been working at a major Aerospace / Defense company since. Responsibilities include designing electronic enclosures for use indoors and outdoors... Read more

Graduate of UC Irvine School of Engineering. Have been working at a major Aerospace / Defense company since. Responsibilities include designing electronic enclosures for use indoors and outdoors with special consideration to electrical parameters. This would include designing bus bar systems, integration of dielectrics, and custom thermal dissipation (heatsinks,TMI,etc.). I have also designed mechanical assemblies for inserting and ejecting boards using sliding and rotating parts as well as creating 360 degree rotating custom fixtures through the use and integration of slip ring systems. I have access to a professional machine shop, metal bender, and finisher for prototyping and low quantity jobs.

A mechanical systems engineer with extensive experience in rapid prototyping and 3D printing electronics, mechanical assemblies, and other various types of systems and components. Read more

A mechanical systems engineer with extensive experience in rapid prototyping and 3D printing electronics, mechanical assemblies, and other various types of systems and components.

Athalia Solis is a first generation Latina college graduate from the University of California, Merced with a degree in Mechanical Engineering. Having begun her academic career at Rio Hondo College,... Read more

Athalia Solis is a first generation Latina college graduate from the University of California, Merced with a degree in Mechanical Engineering. Having begun her academic career at Rio Hondo College, she discovered her passion for engineering after accidentally taking a hand drafting class for engineering. After receiving three associates degrees and an architectural drafting certificate, Athalia transferred to UC Merced. At UC Merced Athalia was exposed to various disciplines of engineering through her coursework, research, internships and Award Winning Senior Project. Her work includes solar thermal energy, photovoltaic energy, materials, strengths, waste handling, and electrical engineering. She has been recognized for her hard work, leadership and expertise having received the Entrepreneur in Training Scholarship Award, Scholarship to Aid Rio STEM Student Recipient (STARR), and Innovate to Grow – Top Finisher. Moving forward, Athalia is looking to apply her passion of learning towards designing solutions for complex engineering problems. Striving to grow and demonstrate her abilities, Athalia is working towards obtaining her Engineering in Training. In addition, she would ultimately like to earn a Master's Degree in a specialized field of engineering.

I am a designer working from home, I own BricsCAD V16 product licensing for creating custom designs in 2D, 3D, and Mechanical Assemblies. I am certified by Portland Community College in Computer... Read more

I am a designer working from home, I own BricsCAD V16 product licensing for creating custom designs in 2D, 3D, and Mechanical Assemblies. I am certified by Portland Community College in Computer Aided Drafting and Design (CADD). I also own an FDM 3D printer, which is capable of small/medium prints in a variety of materials, as well as an SLA 3D printer, of which I am able to make small, very high resolution 3D prints. My skills include, but are not limited to: Logo design, 3D printing, Map making, Menu/Flyer/Business Card design, Product design, and Prototyping.

>Bachelor of Science Degree in Mechanical Engineering - University of Colorado Boulder (ABET accredited) >Certified SOLIDWORKS Associate (5+ years) >Proficient in AutoCAD and AutoCAD Mechanical >4+... Read more

>Bachelor of Science Degree in Mechanical Engineering - University of Colorado Boulder (ABET accredited) >Certified SOLIDWORKS Associate (5+ years) >Proficient in AutoCAD and AutoCAD Mechanical >4+ years experience Machining and Manufacturing experience (3-axis Mill, Lathe, MIG Welding) >4+ years experience 3D printing and laser cutting >Worked with detailed design of Mechanical systems such as: -Drive-train design -Residential 2D and 3D property drawing and modeling -Full-system design and assembly for complex prototypes -Design for Manufacturability