Freelance Tank Design Services

If you are interested in the planet’s best talent for tank design you’ve come to the right place. Cad Crowd is an online platform that will help you connect with freelance tank design experts that are ready to make the best design for your product. 

We have designers that have been screened and vetted, and have proven themselves to be reliable, knowledgeable, and experienced. At Cad Crowd, we are sure that our designers will help you finish your project to your expectations in a timely manner. Avoid the hassles and headaches of online hiring and take advantage of our top-ranking tank design freelancers from Cad Crowd.

People have used water tanks since ancient times. They have stored water for drinking, irrigation, fire control, farming, food preparation and many other things. Water tank parameters are based on the tank’s general design and the selection of construction materials. Today, designers and engineers use different materials to make water tanks – steel, stone, concrete, fiberglass, plastics etc. They are especially popular in developing countries where they are primarily used for storing clean drinking water.

Tank design is all about creating a structure that won’t contaminate or compromise the liquid in it. Let’s take water for example. Water is prone to many different ambient negative effects like viruses, bacteria, pH changes, algae, build up of minerals and gas, etc. This contamination can be caused by different factors like the tank construction materials, improper piping, bird, animal and insect droppings, the intrusion of gas or minerals, and so on. If the tank is designed in the right way, these negative effects will be avoided. 

There are different kinds of tanks available today. First of all, there are chemical contact tanks which are designed for treatment of water with chemicals used for this purpose. There are also ground tanks which are usually made of carbon steel that typically collects surface water or water from water wells. Finally, there are elevated tanks or water towers which rely on pressure for proper discharge. A good designer should be able to create the best design for any type of tank.

At Cad Crowd, we are proud of our designers that can work with clients of any type (individuals or companies) over the entire design process. They will analyze the structure, provide suggestions and deliver the final files in the end. Tank design is not a simple process and our designers are ready to take on every aspect related to the design.

We have a well-developed community that includes thousands of CAD design and engineering experts from around the world. Our mission is to establish connections between clients and top-tier design experts. We offer tank design services at reasonable rates. 

Contact us today for a free quote. Send us your project description, and we'll connect you with industry leading CAD design expertise. Speed up your project by using the help of true professionals from Cad Crowd.

#317
Rupak B
Rupak B IN in Kolkata
Member Since: 2015-02-19
PIPING DESIGN ENGINEERING PROFESSIONAL. Competent design engineer with successful track record of providing PIPING design engineering services across industries over 15 years as a full time employee in the area of Water, Air, Gases, Acid, Steam, Fume, Hydraulic, Grease & Oil Lubrication etc. in German MNC, Austrian MNC, Italian MNC and in the Japanese MNC. - Accomplished more than 12 nos. of projects of piping, from the Basic Engineering to Bill of Materials with Procurement specifications / Manufacturing instructions, using the CAD design applications and the standard codes ANSI, DIN, ISO, JIS and the IS norm. - Deputed to Italy for four times, for the Basic design engineering work of piping, in an average duration of three months for each. - Trained in Germany for three months, on the International Standard Design Drawing & Engineering practices along with the CADD applications. - More than 20 years doing AutoCAD 2D, 3D, Solid Modeling, Customization, AutoLISP & C Language Programming and using the MS-Office, Adobe Acrobat, Email, Internet etc. - Accomplished numbers of Engineering / Technical Writing task; on Contract, Standard, Process, Operation, Maintenance, Training & Education etc. - Post Graduate Diploma in Piping Design & Engineering. - Diploma in Mechanical Engineering. *Please feel free to ask for the Details of my Experiences.
51 points
#596
Hockley Engineering
Hockley Engineering CA in Orangeville
Member Since: 2017-06-20
- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy Plus - Experienced with designing piping systems, cooling water systems, HVAC, compressed air systems, tanks, furnaces, copper cooling blocks for furnaces, off-gas treatment systems, hoods, leak detection systems
31 points
#1236
norsham ismail
norsham ismail MY in Shah Alam
Member Since: 2016-12-22
I am a mechanical design engineer with 13+ years of experience in Autodesk Inventor and Autocad. For the past 13 year i'm been design a various product such as : -sheet metal product -street furniture product -office furniture product -machine design (mixer, disperser, filling machine, solvent recovery machine) - tank and vessel - etc.
11 points
#1291
yskbecker
yskbecker TR in Izmir
Member Since: 2015-02-28
10 points
#1554
MaxOltersdorf
MaxOltersdorf US in Burlington
Member Since: 2016-04-12
10 points
#2274
kezar
kezar BR in Campinas
Member Since: 2014-06-23
I'm a Mechanical Engineer with experience in industrial piping design, pressure vessel, hydraulic and pneumatic systems, steel structures, devices design and java development. I also have experience using AutoCAD, Inventor, SolidWorks, SolidEdge, SAP2000, Ansys, PVElite and Caesar II.
5 points
#2333
Kiran Kota
Kiran Kota IN in Hyderabad
Member Since: 2014-09-21
KOTA KIRAN KUMAR Contact: +91 9985260182; Email: kirankota_k@yahoo.co.in; Date of Birth: 20th July 1986 ________________________________________ DESIGN, COSTING, ESTIMATION, STRATEGIC PLANNING, PROPOSAL & OPERATIONS MANAGEMENT PROFESSIONAL Offering an impressive experience of over 6+ years in delivering optimal results and business value in demanding deadlines ________________________________________PROFILE Competent and experienced Production Management Professional with professional exposure of around 6 years in steering multifunctional & multilevel domains with a highly reputed business establishment. Specialized skills in Design, Costing & Estimation, Production Planning, Resource Planning, Quality Management & Commercial Operations to achieve Plant’s production and profitability objectives. Experience in Fabrication, Erection & Commissioning, Operation & Maintenance, Quality and Inspection of SS Storage and Blending Tanks, Pressure Vessels, Shell and Tube Heat Exchangers, Jacketed Tanks, Screw Conveyors, Piping. Knowledge on ASME Section VIII Division 1, ASME BPE, BS 5500, API 650. Ordering Out the High Lead Time Bought Items such as Raw Materials in SS, Geared Motors, and Pumps etc. Proficiency in Designing of the equipments as per the Client’s RFQ. Sound understanding of the Industrial Standards, ISO Procedures and Quality Management Techniques. Proven track record of making significant contributions by deploying and setting systems, implementing best practices and bringing about considerable cost reductions, while ensuring efficiency and quality benchmarks of the projects. Performance Milestones Credentials of performing as overall in charge for the Manufacturing of the Three Pasteurizers at the Shop Floor which involved Fabrication of the Skid, Heat Exchangers, SS Piping, Steams Setup and Condensate Setup, Machining Items, Inspection and Quality, Water Trial, and Dispatching of the Whole Unit to their Respective Plants. Even Carried Out the Erection and the Commissioning at their respective Plants. Developed ISO Standards for the Quality Department, when it was first introduced in the Company by preparing Documentation and setting up a foolproof system to achieve High Efficiency. Project In charge for a Fully Automatic Ghee Manufacturing Plant, to be setup by Amul, India at Waterloo, US. My work mainly involved selecting the Pumps, Valves, Designing of the Equipments, Skid, Piping and Walk Ways, Fabrication, Installation and Commissioning. Clients Handled Nestle  Coca-Cola  PepsiCo  ITC  UB Group  Perfetti  Parle  Ranbaxy  ATC  Dansa Foods in Nigeria  SBC, Tanzania  Sayona, Tanzania  Clear Pack, Singapore Key Assignments Handled Makson Industries Private Limited, Hyderabad, India  Mars India Private Limited, Hyderabad, India. Unicorn Natural Products (P) Ltd, Hyderabad, India  P&J Crate Chem Private Limited, Hyderabad, India. Taurus Chemicals Private Limited, Hyderabad, India Nestle India Private Ltd, Ponda, Goa, India. Nestle India Private Ltd, Pantanagar, Uttaranchal, India  Ranbaxy Laboratories Private Limited, Paonta Sahib, HP. Nestle India Private Ltd, Pantanagar, Uttaranchal  Hindustan Coca-Cola Beverage Pvt Ltd, Dasna, Ghaziabad, India. Hindustan Coca-Cola Beverage Pvt Ltd, Pirangut, Pune  Bengal Beverages Private Limited, Dankhuni, Kolkata, India. Hindustan Coca-Cola Beverage Private Limited, Bidadi, Bengulure; Ameenpur, Hyderabad; Siliguri, West Bengal. General Electric L&T Mondelez Projects ________________________________________ PROFESSIONAL EXPOSURE UNICORN INDUSTRIES (P) LTD; since May’08 Design, Costing & Estimation Engineer; Sales and marketing since Feb’13 Instrumental in planning, scheduling wrt cost, resource deployment, time over-runs, quality compliance & manpower planning in line with the organization requirements; ensuring adherence to organization’s standards & procedures. Involve in problem identification, selection of appropriate technical solutions, materials, test equipment, and procedures, for the manufacture and production of safe, economical, high-performance products and services. Streamline new process concepts for production optimization, yield improvement & adopting new cost reduction techniques. Design of the Equipments as per Client’s RFQ, performing Costing and Estimation and Submitting Offers. Attend Technical and Commercial Negotiations with the Clients based on the Offer submitted. Quality, Maintenance and Machine Shop Engineer; Aug’11-Jan’13 Application of quality processes in a graded approach to the specific product or service. Participation in the development and review of project documentation. Direction and support for procurement activities. Application of testing and inspection activities to specific systems. Assessment of systems to identify deficiencies and participate in resolution of issues found. Strengthened the ISO Systems through streamlining and traceability. Production, Planning and Site Engineer; May’08-Jul’11 Spearheaded efforts across handling production planning & control thereby ensuring strict adherence to the time schedule, quality standards and total productivity maintenance whilst achieving pre-set production target. Planned & controlled all project activities connected with safe and efficient operations; implemented quality standards for meeting the set targets within time & cost parameters. Supervised production related tasks including planning, procurement, assembly, control and troubleshooting for achieving the planned periodic schedules. Ensured safety, regulatory and environmental compliance; coordinating with the government & statutory bodies for approvals, permissions and sections. Involved in Analyzing and understanding all aspects governing operational activities and up to date knowledge of latest technological advancements, regulations/ guidelines and compliances in the industry. Involved in production operations including finalization of technical specifications of plant equipment, staff selection, erection &commissioning of equipment, staff training, ISO, scheduling production & dispatch activities etc. Initiated and executed on-site job as per drawings & approved work methods. Acting as a single point of contact for main Technical Adviser on a site to the Technicians and Operatives. Prepared/reviewed method statements & work specific quality control plans. Prepared reports using MS Office. ________________________________________ ACADEMIC CREDENTIALS B Tech; 2007 Sree Visvesvaraya Institute of Technology, Mahabubnagar affiliated to JNTU, Hyderabad; 62.16% Computer Proficiencies: Microsoft Word, Excel and PowerPoint, AutoCAD Academic Project: Stress Concentration Factor of Different Shafts and its Reduction ________________________________________ Languages Known: English, Hindi and Telugu References: Available on Request
5 points
#2568
Leroce
Leroce IN in Mumbai
Member Since: 2015-07-28
I am a Design Engineer and I have more than six years of working in software like Autocad, Pro-E, Catia, Unigraphics, Solid works,Ansys.I had done many Projects for Automobile, Plastic and Heavy Engineering industries.I have good innovative skills which is needed for success for an organization.Timely delivery and Client satisfaction are my priorities.
5 points
#2793
jquevedo
jquevedo VE in El Tigrito
Member Since: 2016-07-15
I´m a venezuelan Mechanical Engineer graduated from Simon Bolivar University (USB), with years of experience in engineering projects on the piping and equipment area, I have worked in the design of several onshore and offshore facilities including: dehydration and separation process, fire protection systems, secondary oil recovery’s systems with water injection and treatment plants, gas compression systems, oil and gas transportation pipelines offshore facilities. I´m very well recognized by all my clients for all the solutions that I find for engineering problems and designs.
5 points
#2982
JONATHAN M
JONATHAN M BS in Freeport
Member Since: 2017-04-03
I am a Mechanical Engineer graduated in 2011 at University Simon Bolivar of Venezuela, I have a Master Engineering in Mechanical Design of Process Plants in University Simon Bolivar of Venezuela. Semi Senior Mechanical Engineer focus in Piping Design, Piping Stress Analysis and Static Equipment Design and and alterations, Atmospheric Tanks Design and Alterations with a Master Engineering in Mechanical Engineering of Process Plants, over six years of experience in oil refineries and petrochemical plants, marine terminals developing piping stress analysis, piping design, design and alteration of atmospheric storage tanks and pressure vessel in works areas like chemical productions plants, oil refineries, on-shore crude production, natural gas transport lines and big experience in power plants. Acknowledge for achieving high quality standards in engineering, design practices, maintenance practices, troubleshooting in process plants, effective improvement in key process and workflows.
5 points