Freelance Engineering Surveying Experts

Searching for the best professionals with experience in the field of engineering surveying? You’ve come to the right place. Cad Crowd will connect any client with freelance engineering surveying specialist capable of surveying any type of terrain for any type of project. We have designers that are selected carefully and designers and engineers that are pre-trained, pre-qualified and knowledgeable. In addition, they are backed by our belief that all your project’s needs will be completely met. Leave the guesswork of hiring online out and establish a connection with high-quality engineering surveying freelancers from Cad Crowd.

Engineering surveying can be defined in different ways because this is a relatively broad term. Generally speaking, this is a type of surveying focused on civil engineering activities. The basic goal of every engineering surveyor is greater than setting out the construction of a building or structure and simple survey pickups. Namely, engineering surveyors usually examine completed designs for projects and locate any practical or design flaws. 

Engineering surveying is a type of surveying that relies on a huge number of instruments that support this complex activity. The most used instruments in this job are Dumpy Levels/Digital Levels, GPS, and Total Stations. Surveyors trained in this field need the plans for the task and after review, they start drawing these plans on CAD computer software. While the calculation and drawing phase is still on, they will be able to locate any flaws in the design or improve the functionality of the structure. In case they identify any flaws, they will consult the engineers and solve them. 

When the design is plotted and all the calculations are made, the activity on site will start. Surveyors will create a network of control points located around the site after they determine the position together with supervisors and engineers. Obviously, these control points must be in a safe, helpful, and accessible part of the structure. When the survey data has been gathered, engineering surveyors will get back to their office and process the data, finish calculations and complete the documentation. Of course, some of these tasks can be completed remotely and this is where freelancers from Cad Crowd come into play.

With the help of our experts, you will get this job done in record time.  They will work with any client through this complex process, from the beginning to the end. Engineering surveying includes different services and our freelancers provide them all. You must work with the best surveyors to get the ultimate results.

At Cad Crowd, we have a vibrant community that includes over 12,000 professionals from every corner of the world. They are providing top-notch engineering surveying services at a great price.  Let us know about your next project. Our team will be glad to assess your project’s needs and requirements and suggest the right professional for this type of job. We'll also connect you with a leading freelance engineer. Start working on your project today, and use the services of the best freelancers in this industry.

 

#1525
Michael Sheperd
Michael Sheperd US in Rensselaer
Member Since: 2017-02-27
I'm a structural engineer with 04 years of professional experience. I specialize in the design of reinforced concrete & steel structures for both indutrial & residential projects. I am expert in SAP2000, ETABS, STAAD, SAFE, Autocad. I also have great skills in Architecture, have Bachelor in architecture I am ready to apply my skills & experience to your projects & look forward to hearing from you.
10 points
#2319
AnyiGTC
AnyiGTC NG in Owerri
Member Since: 2014-09-04
A) I am: - a professional civil/structural engineer with 34 years experience in analysing, designing and detailing reinforced concrete, structural steel and wood structures in civil, infrastructure, geotechnical, environmental, structural and building area; studying and designing roads & roadway structures, flood & erosion control structures, water supply & distribution systems, irrigation systems, watershed management systems and master planning. - skilled in project supervision, monitoring, evaluation and control - skilled in cost engineering & estimating - skilled in the use of BIM/CAD/GIS for integrated and fast-tracked project delivery. B) I have a bachelor of engineering degree in civil engineering (B. Eng) and a Master of Business Administration of degree.
5 points
#2951
siliconecnz
siliconecnz NZ in Auckland
Member Since: 2017-02-27
Siliconec NZ Consultants offering Services Architectural, Structural, Civil, HVAC, Electrical, Plumbing, Piping, Scan to BIM, Steel Detailing, Shop Drawing, Cost Estimation and Tendering Construction Engineering Planning Project Monitoring and Controlling.
5 points
#2971
nicowanjala
nicowanjala KE in Nairobi
Member Since: 2017-03-27
Self motivated Geospatial Engineer passionate about attainment of SDGs through continued use of Design Thinking.
5 points
#2979
JONATHAN M
JONATHAN M BS in Freeport
Member Since: 2017-04-03
I am a Mechanical Engineer graduated in 2011 at University Simon Bolivar of Venezuela, I have a Master Engineering in Mechanical Design of Process Plants in University Simon Bolivar of Venezuela. Semi Senior Mechanical Engineer focus in Piping Design, Piping Stress Analysis and Static Equipment Design and and alterations, Atmospheric Tanks Design and Alterations with a Master Engineering in Mechanical Engineering of Process Plants, over six years of experience in oil refineries and petrochemical plants, marine terminals developing piping stress analysis, piping design, design and alteration of atmospheric storage tanks and pressure vessel in works areas like chemical productions plants, oil refineries, on-shore crude production, natural gas transport lines and big experience in power plants. Acknowledge for achieving high quality standards in engineering, design practices, maintenance practices, troubleshooting in process plants, effective improvement in key process and workflows.
5 points
#3049
miskath16
Member Since: 2017-05-28
I am a civil engineer as well as a 3D modeller. i have more than 2 years experience in construction industry. As a AutoCAD drtaftsman i work one and half years and as a 3D modeller i work nearly one year. i expert in Autodesk AutoCAD 2D&3D, Tekla Structure, and Autodesk Revit. My knowledge in construction and design field it will help to provide the highest quality services to my Clint. Please reach out with any questions or opportunities.
5 points
#7892
Sangeeth Roshan
Sangeeth Roshan IN in Kochi
Member Since: 2015-05-17
0 points
#9089
3Dengineer
3Dengineer PK in Islamabad
Member Since: 2015-11-02
0 points
#9650
Rene Holder
Member Since: 2016-01-19
• Designed power distribution systems, lighting distribution and control systems and lightning protection systems • Documented Mechanical, Electrical and Plumbing LEED credits • Surveyed existing mechanical, plumbing and electrical (MEP) distribution systems, prepared studies documenting and analyzing the existing conditions and recommended corrective actions • Commissioned and tested mechanical, plumbing and electrical systems for new construction projects (fundamental and enhanced commissioning) • Audited the energy usage for existing electrical and mechanical systems and analyzed the cost and feasibility of potential energy conserving measures • Performed capital planning studies for the documentation of existing inventory and the budgeting of resources for the future maintenance and replacement of mechanical, plumbing and electrical systems • Estimated construction costs using RS Means
0 points
#12240
Argo Navis
Argo Navis AE in Dubai
Member Since: 2016-10-01
Argo Navis is a specialist design, engineering and consulting company, built on years of extensive experience in the marine, offshore, boat and yachting industries. The company comprises an expert team of structural, mechanical and electrical engineers, naval architects, and analysts, dedicated to providing bespoke services of the very highest quality. The team’s collective skillset enables bespoke solutions from conception to delivery.The software we use encompasses naval design, finite element analysis, tooling and prototyping. Specifically: Solidworks, Rhinocerous, Autocad, Delftship, Autohydro, Patran and other CAD/CAM software facilitating outstanding quality design output, meticulous accuracy in measurements and renowned results.
0 points