Freelance Controls Engineering Services for Hire

Cad Crowd is a leading online platform where you can find the greatest talent for control engineering in the world. We will be glad to connect each of your clients with freelance control engineering expert to create the best design for their products. The designers found on Cad Crowd are tested, pre-qualified, reliable and experienced. We are sure that they will provide results that will match your project’s specifications and needs. Leave the problems out of online hiring and connect only with highly-skilled professional control engineering freelancers from Cad Crowd.

Control engineering, also known as control systems engineering, is a special part of engineering that relies on control theory to create systems with specific behaviors. This practice relies on sensors to assess the output performance of a certain device that is being managed and these assessments are used to provide feedback to the input actuators that are able to make corrections in order to achieve the wanted results. Whenever a device is made to act without the need of human involvement for correction we are talking about automatic control. 

Control engineering is the practical use of control theory. This type of engineering has an important role in many different control systems starting from a household microwave all the way to jet bombers. Control engineering is about using physical systems through mathematical modeling. These systems can be electrical, mechanical, financial, chemical, fluid, or biological. 

In the beginning, control engineering was almost exclusively focused on continuous systems. The emergence of computer control tools required the use of discrete control system engineering due to the fact that communications between physical systems and computer-based digital controllers are managed by a computer dock. Nowadays, the majority of control systems are controlled by a computer and they include both analog and digital components. In addition, the design technique has evolved from a design based on paper and rulers (manual design) to CAD (Computer-aided design). There is also computer-automated design, also known as CAutoD, used in this process. In any case, you’ll need an experienced professional to finish a task like this.

Cad Crowd has designers that will conduct activities with you over the entire design process. This means that they’ll be present from the beginning to the end and they will inform you about all the things that are going on. Since control engineering covers a wide range of activities applied in different industries we can’t make a complete list of design options, but we can say that our designers are prepared to work on all of them.

Cad Crowd has developed a powerful community that includes thousands of experts gathered here from every part of our planet. It’s our job to connect clients with top-rated freelancers. These experts are providing control engineering services at a competitive price. Let us learn more about your project. Our team will assess your requirements and help you make a connection with the best person for this task.  Whether you're an independent designer or an established company, we have the freelance expertise you need to complete your project.

#1673
A.J.
A.J. US in
Member Since: 2015-11-13
My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic and control narratives for coke drum sequence control system, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system - SAUDI ELASTOMER PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic, cause and effect, control and safeguarding narratives of the whole EPC project, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system as a SENIOR INSTRUMENT & CONTROL ENGINEER - SOUTH PARS PHASEs (Phase 12, Phase 17 and 18) as an INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT: o Responsibilities: Principal detail design work for several related Demin water, waste water and polishing water units as a INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT. My skills can be summarized as in developing required detail instrument and control documents for EPC projects (Control narratives, C&E, S.G. Narrative, Logic, Index, Cable routing, etc., package or detail design review, design leadership and highly qualified in working with Autocad, and M.S. Office, programming and etc. The key strengths and achievement that I possess for success which make me very competitive candidate for the above position are as follows: • Receiving Award of Excellence of Year 2014 as the best instrument engineer in a reputable EPC Company, due to EPC project cost saving of more than 5,000,000 USD. • Leading package design works for more than 39 packages for SAUDI Elastomer project and more than 20 packages for OMAN SRIP project. Those packages include Utility boilers and water, air and oil utilities, several gas and air reciprocating and centrifugal compressors and etc. • Leading the design work for the Vibration monitoring and condition monitoring system of above projects • Developing the control and safeguarding narrative and logic works of SEP project (SAUDI Elastomer Project) • Leading the instrument database works for above projects • Being involved in various turbine control scenarios and I believe myself as a turbine control specialist. • Promotion from principal to senior to lead instrument engineer and finally to vice of deputy of engineering management in a process package vendor company within short period of time due to the high technical and leading skills • Leading detail design works of packages in vendor companies with variety of abilities including detail design, PLC programming and etc. • Leading and also carrying out the detail design, procurement and some parts of the constructions steps of more than four EPC process and utility units in Oil and Gas Industries worldwide as a vendor package detail designer and reviewer. • My strong analytical and forward looker mind, punctuality, perseverance, excellence and development seeking characters have led to more accurate, efficient and cost saving designs • Cost effectiveness along with better efficiency is one of the aims is being sought and I believe that engineering is a trade-off between the cost and the efficient design With a BS degree in Instrument and Control Engineering, I have a very good knowledge of process control and instrumentation, high leadership potential and energy levels, very strong analytical mind and deep detail-oriented skills, multitask handling abilities, responsible, creative and strong technical experience, very motive, super active and highly efficient and all this is owing to my educational backgrounds and absolutely my past experience in research then in detail design, then design review of small to enormous EPC project as well as conducting detail design leadership as a senior instrument and control engineer. Attached, you can find my resume for your kind consideration. I can be reached anytime via email at aj.naji.h@gmail.com or my cell phone, +1-830-309-0843
6 points
#2079
kjenkins
Member Since: 2012-09-21
I'm a mechanical engineer from UC Berkeley currently working for Boeing. I've worked on all sorts of projects on teams of various sizes. I'm especially interested in projects relating to aerospace, but I'll never pass up a challenge.
5 points
#6540
VCJ Mechanical
Member Since: 2014-10-17
I offer my mechanical engineering services for a range of different projects. Projects that range from HVAC load calculations to providing CAD drawings and 3D Modeling. I also have experience in designing several electro-mechanical, or purely mechanical systems and have an intermediate understanding of electrical engineering, such as designing electrical circuits. I am also a Roboticist and understand robotics. I am also very proficient in running simulations in MATLAB or using LabVIEW as a programming platform. I primarily use: SolidWorks, AutoCAD MEP, and Revit MEP.
0 points
#9545
Oji
Oji US in
Member Since: 2016-01-07
Talented instrument and controls engineer experienced in industrial water tube and fire tube boiler automation and control systems, lead/lag/standby control, feed water control, level control, food & beverage processing control, consulting, start-up project management and leadership, technical support, instrument calibration, flow element calculation requirements, valve sizing calculation requirements, electrical panel design, programmable logic controller design (PLC), automation graphic user interface (GUI) software design and development.
0 points
#9996
dkumpf
dkumpf US in Everett
Member Since: 2016-02-25
0 points
#13096
RICCO
RICCO AR in Buenos Aires
Member Since: 2016-12-19
0 points