Hire the best BIW experts for your company

Experienced system layout Engineer with over 6+ years of experience in the automotive industry working with automated BIW robotic systems and skid conveyor systems. Strongly proficient in AutoCAD 2D &... Read more

Experienced system layout Engineer with over 6+ years of experience in the automotive industry working with automated BIW robotic systems and skid conveyor systems. Strongly proficient in AutoCAD 2D & 3D system layout design using engineering and build standards for Ford, GM, Stellantis, & Rivian projects. Recent projects I have worked on from my employers: GM T1 Flex, Oshawa- System layout design & support BIW Stellantis JNAP, Framing System layout design & support BIW Ford CUAP CX727 BIW Speedup Kits, Lead System Layout Engineer GM Detroit Factory Zero- System layout design & installation support skid conveyor systems (FactoryCAD /AutoCAD) Rivian R1T - System layout BIW design (AutoCAD)

I have complteted my graduation on B.E Mechanical Engineering the year of 2016. I have a done project on Designing of KIT pallet and Kitting Zone at Renault Nissan. Read more

I have complteted my graduation on B.E Mechanical Engineering the year of 2016. I have a done project on Designing of KIT pallet and Kitting Zone at Renault Nissan.

Given my experience of 6.5 years in BIW & Fixture Design, Project Management, Product design I pride myself in being associated with Onward Technologies Ltd. As Design Engineer for over 3 years and... Read more

Given my experience of 6.5 years in BIW & Fixture Design, Project Management, Product design I pride myself in being associated with Onward Technologies Ltd. As Design Engineer for over 3 years and implementing pure Domain knowledge to meet customers’ expectations by managing team member. During all my jobs I have performed and utilising my knowledge to Design tools (Fixture, Press Die and SPM) ergonomic and cost effective with zero error deliverables.

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

Professional Summary  Total Design experience: Design Engineer 7 +years(CATIA V5 )  Sheet metal design ,Press Tool design , BIW Welding Fixtures  Competitive experience in Design industry us... Read more

Professional Summary  Total Design experience: Design Engineer 7 +years(CATIA V5 )  Sheet metal design ,Press Tool design , BIW Welding Fixtures  Competitive experience in Design industry using Generative Shape Design, Part Design, Assembly Design, Drafting, workbenches of CATIA V5 Technical Skills  Design of Press Tool design, Sheet metal parts design, BIW Fixtures  Aware of Tooling feasibility, Manufacturing Processes, Materials in Sheet Metal  Gathering information regarding product specification, GD&T drawing of product & designing, detailing and modifying/upgrading existing designs of tool as per Tooling Feasibility, Strength, and Defects etc.  Interact with customer and other departments for Design review and approvals.  Geometric Dimensioning & Tolerances (GD & T).  Conversant with 3D design and 2D standards of various OEMs.  Aware of various practices in applying DFMA, DFA,DFM  Non Parametric to Parametric modeling of Parts Input(IGS,STL, 3DXML,STEP,CGR)  Result oriented, with a keen eye towards perfection in delivering quality service.  Ability to serve as a good team member and effectively work towards commitment.  A good team player with strong communication, analytical, logical and problem solving skills

Have done training cum Internship in CAD software, Have good practice onto the software. Strong practice of modelling and drafting/detailing. Design the CAD models keeping Manufacturing aspects in m... Read more

Have done training cum Internship in CAD software, Have good practice onto the software. Strong practice of modelling and drafting/detailing. Design the CAD models keeping Manufacturing aspects in mind. Knows Remastering of IGES/step files in CATIA.

I am a passionate Mechanical Engineer with a keen interest in the Computer-Aided Design domain. Certified with a Degree in Mechanical Engineering from Anna University. Over the last 5+ months, I have... Read more

I am a passionate Mechanical Engineer with a keen interest in the Computer-Aided Design domain. Certified with a Degree in Mechanical Engineering from Anna University. Over the last 5+ months, I have completed various Industry Relevant Projects. Currently, I am pursuing a Master's Certification Program In Design Engineering at Skill-Lync, specializing in 3D Solid Modeling, Surface Modeling, Geometric Dimensioning and Tolerancing, Automotive BIW & Plastic Design. Also Currently, I am doing an Internship as an "Engineering Intern" and working on Industrial Projects. I have strong experience in CAD tools such as Siemens NX, Solidworks & also have a good knowledge of GD&T.

My name is Sultan Morbiwala, an aspiring inventor who loves to implement new ideas in the field of mechatronics & design. I am doing 2D/3D design for 2 year and have proficiency using CAD tools like S... Read more

My name is Sultan Morbiwala, an aspiring inventor who loves to implement new ideas in the field of mechatronics & design. I am doing 2D/3D design for 2 year and have proficiency using CAD tools like Solidworks for 3D modeling, keyshot for animation and rendering. I have sent my design to manufacturing using materials like steel, woods, aluminum and familiar with using 3D printer for prototyping. My secondary skill includes Electrical/PCB design and programming. My main value is my adaptability since I have diverse experience in different fields like Mechanical, Electronics & Computer Science. I can definitely help you to go from concept to final product

Mechanical Engineering Graduate with a rich experience of 11+ years in the field of Mechanical Design & Development. Extensively worked on Earth Moving Machinery (Excavator, Backhoe loader, Fastrac &... Read more

Mechanical Engineering Graduate with a rich experience of 11+ years in the field of Mechanical Design & Development. Extensively worked on Earth Moving Machinery (Excavator, Backhoe loader, Fastrac & Telemaster), Construction Equipments, Automotive Components, SPM, Jigs & Fixtures (BIW Welding & Inspection Fixtures), Gauges Tool design, and Sheet Metal Design. An expert in the design and development of Hydraulics system like hose design, hose and tubes routing, Hydraulics calculations and Hydraulics system modifications. Possess good knowledge about Structural Design and Structural Calculations. Proven efficiencies in handling design-related projects within the stipulated timelines and resources; have worked on Stage V work on the product Fastrac & Telemaster, Chassis modification as per the stage v requirements. Expertise in the Design of new Casting version of counterweight to suit the surrounding parts along with contributions in cost optimization. Well-versed with the GD&T, Tolerance Stack-up Analysis, DFA, DFM, DFMA, DFMEA & 8D problem solving guidelines and procedure. Hands on expertise in 3D Modelling and Details drawing. Known for exceptional understanding of customer’s design requirements, having achieved high CSAT by delivering excellence in design solutions.

Myself Ankit here, I have Passed out my b.e mechanical in july 2018. I have also completed BIW automotive design course . Here my capabilities are, • I can do model the parts in surfacing as well as... Read more

Myself Ankit here, I have Passed out my b.e mechanical in july 2018. I have also completed BIW automotive design course . Here my capabilities are, • I can do model the parts in surfacing as well as in part design. • I can do remastering of reference models. • I have knowledge of drafting workbench auto as well as manually. • I also do editing and updating of models. • Software skills: Catia (surfacing and modelling), autocad (Drafting).

Engineering drawing symbols, knowledge of GD&T, Tolerance and Fits. Real time projects experience. Sheetmetal/ BIW/Plastic 2D/3D Design software skills: Autocad, SOlidworks, CATIA V5 and UG-NX Read more

Engineering drawing symbols, knowledge of GD&T, Tolerance and Fits. Real time projects experience. Sheetmetal/ BIW/Plastic 2D/3D Design software skills: Autocad, SOlidworks, CATIA V5 and UG-NX

I am BIW (Body In White) product design engineer with 7 years continuous experience. Proficient in creating accurate plastic trims modeling, sheet metal, 3D model, using CATIA V5 2019. Please see s... Read more

I am BIW (Body In White) product design engineer with 7 years continuous experience. Proficient in creating accurate plastic trims modeling, sheet metal, 3D model, using CATIA V5 2019. Please see some of my skills below: -high experience in 3D modeling using CATIA V5 2019; -modeling for BIW Sheet Metal, assembly and drafting in CATIA; -expert in parametric modeling, remastering and trims; -modeling for plastic molding, injection molding processes; -expert in 3D printing etc.; -composite structures designing; -high skill in surfaces modeling (CATIA complex shapes); -experience in automotive, aviation, household goods designing. I'm interested in long-time projects as well as in small tasks.

I have done diploma in biw fixtures and design and work on live project of auto rikshaw chasis and biw fixture and line project of door trim ,dash board ,console,seat in plastic domain by using catia... Read more

I have done diploma in biw fixtures and design and work on live project of auto rikshaw chasis and biw fixture and line project of door trim ,dash board ,console,seat in plastic domain by using catia Vr21 and automobile interior and exterior design etc,I like to make my career in auto mobile design engineering and Analysis..

Work experience: • 01.04.2014 - up to this date → Passive Safety Engineer Workplace: RENAULT TECHNOLOGIE ROUMANIE Responsibilities: Realizing the pre- and post- processing of complex Finit... Read more

Work experience: • 01.04.2014 - up to this date → Passive Safety Engineer Workplace: RENAULT TECHNOLOGIE ROUMANIE Responsibilities: Realizing the pre- and post- processing of complex Finite Element Models and analyzing the behavior of the BIW (body in white) subjected to different load cases, according to the type of calculation required: passive safety, endurance or NVH. Analyzing the BIW behavior and proposing solutions to the problems encountered, in order to achieve the required performances. Proposing solutions, drawing parts and iterating rapidly in order to improve different behaviors of the BIW. Using specialized programs for each step of the process (such as ANSA or Hypermesh for pre-processing, PamCrash, Nastran, Abaqus for processing and MetaPost for post-processing) Realizing and writing standardized calculation procedures or technical documentation. Training new employees, teaching at workshops. Making correlations between tests and the Finite Element Calculations. Supervising projects during the development phase and during their life. • 01.09.2013 - 31.03.2014 → CAD/CAE Engineer Workplace: SEGULA TECHNOLOGIES ROMANIA SRL Responsibilities: Realizing the pre- and post- processing of complex Finite Element Models and analyzing the behavior of the BIW (body in white) subjected to different load cases, according to the type of calculation required: passive safety, endurance or NVH. Analyzing the BIW behavior and proposing solutions to the problems encountered, in order to achieve the required performances. Proposing solutions, drawing parts and iterating rapidly in order to improve different behaviors of the BIW. Using specialized programs for each step of the process (such as ANSA or Hypermesh for pre-processing, PamCrash, Nastran, Abaqus for processing and MetaPost for post-processing) • 11.06.2012 - 03.08.2012 → Car mechanic Workplace: SC Ana Reviteh SRL, 9 Tudor Vladimirescu Street, Otopeni, Ilfov, Romania Responsibilities: Repairing cars, ensuring the maintenance operations for cars, making the periodically technical inspections Education: • 2013 - 2015 → Universitatea POLITEHNICA din Bucuresti (Transports College, Automotive Department ) Degree: 2nd Degree in Automotive Engineering Studied subjects: NVH; Finite Element Simulations in the Automotive Industry using Ansys; Automotive Testing; Internal combustion engines - simulation of thermodynamic processes; Automotive aerodynamics - Theoretical models and Finite Element analysis using CFD/CFX; Longitudinal and lateral automotive dynamics - Studies of stability and maneuverability using theoretical models and software (TruckSim / CarSim); Automotive components - Studies of durability using theoretical models and software (Ansys); Electric and hybrid vehicles; Automotive dynamics modeling using Matlab Simulink; Automotive passive and active safety; Tire - road interantion; Automotive components simulations using LMS AMESim. Scientific research: Analysis of usage of carbon fiber composites in order to design and construct the monocoque structure for a Formula Student car. Skills: A better understanding of the construction and operation requirements of cars; Use of different software to simulate different processes or components for a car; Advanced modeling capabilities. • 2009 - 2013 → Universitatea POLITEHNICA din Bucuresti (Transports College, Automotive Department ) Degree: 1st Degree in Automotive Engineering Studied subjects: Advanced technical drawings knowledge; Theoretical knowledge in designing and constructing internal combustion engines; Automotive Dynamics; Automotive testing; Automotive maintenance; Automotive noises and vibrations; 3D modeling using Catia v5, SolidWorks and Autodesk Inventor; 2D modeling using Autodesk Autocad and Catia v5; Kinematic analysis of mechanisms; Scientific research: Designing and constructing a spatial frame made out of steel tubes, for a Formula Student race car. Skills: Advanced knowledge in design, construction and operating principles of motorized vehicle; Advanced skills in 3D modeling parts, components and subassemblies of motorized vehicles; Knowledge in reading and interpreting technical drawings; Knowledge in automotive testing; Outstanding performances: Valedictorian student • 2005 - 2009 → National Informatics College "Tudor Vianu" Degree: Assistant programmer Studied subjects: Advanced mathematics and computer science; Skills: C++ programming; Basic knowledge of HTML programming; Foreign languages: Romanish: C2 - Native English: C1 - Expert German: B2 - Advanced French: A1 - Beginner Romanian: C2 - Native Activities: President of the Formula Student Team at the University Took part in activities organized by Junior Achievement: JA Student Company, JA Titan, JA Business Ethics; 1st and 2nd Prize at National competitions in Theoretical Mechanics and Mathematics; Overall skills: Design and analyze automotive components; 2D and 3D designs skills; Advanced knowledge in passive and active safety; Advanced knowledge in Finite Element modeling; Advanced knowledge in components simulating software;

12+ yrs of experience in Automotive Passenger car Body design(BIW, Closure & Trims) 3D CAD modelling expert with good surfacing skills. Read more

12+ yrs of experience in Automotive Passenger car Body design(BIW, Closure & Trims) 3D CAD modelling expert with good surfacing skills.

Hands on experience in wide range of Reverse Engineering,BIM Modelling, 3D Scanning, Scan Process, Point Cloud process Reverse Engineering: Creation of CAD from 3D scanned references of whole car inc... Read more

Hands on experience in wide range of Reverse Engineering,BIM Modelling, 3D Scanning, Scan Process, Point Cloud process Reverse Engineering: Creation of CAD from 3D scanned references of whole car including (Casting, BIW, Interior Trims, Breaking System, Cooling System, Door Trims, Seats, Battery...., BIM Modelling: Hands on experience in Point cloud to BIM modelling of various commercial & Residential buildings and Industries.

I had very strong hand on Catia V5, Even I worked on many Japanese projects for Fixtures for BIW panel. Currently I am working on SAP technology & also keeping my hand busy on Fixture designing on per... Read more

I had very strong hand on Catia V5, Even I worked on many Japanese projects for Fixtures for BIW panel. Currently I am working on SAP technology & also keeping my hand busy on Fixture designing on personal level.. I had also formed team of six members, we also believe we can complete an stage within 45 days

1. Planning A Layout, B layout & 3D process for Progressive, Transfer & Tandem Dies 2.One-step & Incremental Formability Simulation Using Auto Form. 3.3D & 2D Die Design for Progressive, Transfer &Tan... Read more

1. Planning A Layout, B layout & 3D process for Progressive, Transfer & Tandem Dies 2.One-step & Incremental Formability Simulation Using Auto Form. 3.3D & 2D Die Design for Progressive, Transfer &Tandem Dies Using CatiaV5 Tool with Parametric Method. 4.Exposed to Transfer Tools with acquaintance of Transfer press Specification & working 5.Exposed to Various die designs like Draw, Trim Flange& Restrike (Single & double Pad Construction) & Cam designs Like Aerial, Die mounted, Fill & Upper pad mounted cams. 6.Blank Development & Material Utilization 7 Exposed to Die cost estimation, Part cost estimation, Viability study for Stamping parts 8.Worked in different technical standards of Renault, Ford(WDX) VW, GM, Tata, Bajaj & many Tier-1 stamping suppliers 9.Exposed to various Jigs, Fixture designs & development for BIW. 10.Stamping Material ranges from 0.6 mm – 12.0 mm Thickness. a.Ultra High Strength Steels (UHS) b.High Strength Low Alloy Steel (HSLA) c.Dual Phase Steel d.Low Carbon Steel e.Stainless Steel 10.Currently handling Green Project with various function of Stamping process 'Die design, Die face & Simulation, Vendor die making, & Vendor tool cost reduction'.

I am a Mechanical Design engineer, Studied from reputed university in India. I have more than four years of experience as a Fixture Design Engineer in BIW Department and create para solid from 3DXML,... Read more

I am a Mechanical Design engineer, Studied from reputed university in India. I have more than four years of experience as a Fixture Design Engineer in BIW Department and create para solid from 3DXML, JT or other File.

jig fixture gauges sheet metal design press tool design spm design checking fixtures biw fixture design cad cam unigraphics machine design heavy machinery CATIA special purpose machine design Design Read more

jig fixture gauges sheet metal design press tool design spm design checking fixtures biw fixture design cad cam unigraphics machine design heavy machinery CATIA special purpose machine design Design

Kunal Dhaneshwar is a BIW fixture designer from India. Hands on experience on Catia V5 part design,3D modeling, Drafting, Generative shape design. Currently trying to get some design work. Read more

Kunal Dhaneshwar is a BIW fixture designer from India. Hands on experience on Catia V5 part design,3D modeling, Drafting, Generative shape design. Currently trying to get some design work.

I'm mechanical engineer with 3+ years of hands on experience as a design engineer. While designing I consider cost of manufacturing, weight, durability, ease & safety of product. I've worked on variou... Read more

I'm mechanical engineer with 3+ years of hands on experience as a design engineer. While designing I consider cost of manufacturing, weight, durability, ease & safety of product. I've worked on various MIG, spot welding fixtures, BIW spot welding fixtures, cutting machine fixtures, pipe bend checking fixtures, checking fixtures & guages.

Have good experience in BIW Welding and checking fixture Have good knowledge in Press tool, Mold, Casting Dies and Tools Read more

Have good experience in BIW Welding and checking fixture Have good knowledge in Press tool, Mold, Casting Dies and Tools

Mechanical engineer with 1.4 years of experience in Aerospace domain and fixture design. Work experience in Automotive BIW fixture and gripper design. Familiar with Design of Automotive plastic trims... Read more

Mechanical engineer with 1.4 years of experience in Aerospace domain and fixture design. Work experience in Automotive BIW fixture and gripper design. Familiar with Design of Automotive plastic trims using Catia V5 and basic knowledge on creation of A-Class surface, B- Class surface, tooling direction and Draft analysis. Hands on experience in 3D part modeling, surface modeling and drafting using Catia V5 and Solid works design tools and basic knowledge on Siemens NX. Familiar with Ansys Workbench and Hyperworks/Hypermesh tools. Proficient in reading manufacturing drawing, assembly drawing and installation drawings. Strong Knowledge on Geometric Dimensioning & Tolerance (GD&T).

Hello everyone , I am Ganesh Dhole.I am from pune.I have completed my graduation in mechanical Engineering from pune university. After completing my graduation i was decided to work in automotive... Read more

Hello everyone , I am Ganesh Dhole.I am from pune.I have completed my graduation in mechanical Engineering from pune university. After completing my graduation i was decided to work in automotive product design because I am very passionate about automotive product design like BIW exterior & Interior design.I have to use my potentials and skills in engineering development in automotive to live better comfort and satisfaction.

Product D&D Engineer with expertise in Consumer durables, Automotive interior trims, Casting and Biw. Strong Modelling and detailing knowledge. Able to do stack up and design according to DFMA and DFM... Read more

Product D&D Engineer with expertise in Consumer durables, Automotive interior trims, Casting and Biw. Strong Modelling and detailing knowledge. Able to do stack up and design according to DFMA and DFMEA.

Completed diploma in mechanical stream in 2006,having 7years of experience in BIW welding fixture design,also having experience in 2d drafting in the same area. Read more

Completed diploma in mechanical stream in 2006,having 7years of experience in BIW welding fixture design,also having experience in 2d drafting in the same area.