Bottle Design

in CAD Design held by yakub31786
Contest Closed
Description:
Here i need someone to make plastic bottle design of four sizes i.e. 100 ml, 250 ml, 500 mp and 1 litre. The bottles are related to agricultural product so it should look like agricultural bottle by means of features such as its shape or its theme or engravings etc.
Wants:
Its appearance as an agricultural bottle.
Software:
  1. SolidWorks (2020)

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

solid works modification
i need to reduce length tube by an inch, make it fit better on male threaded part, plus: 2. make narrower end fit over a 7/8" diameter tube,  and the larger end over a 1" tube. 3. make male threaded part fit onto a 1" diameter tube. I have make threaded part in solid works too but unable to attach it.
Hydroplane Challenge
I have made a prototype of the attached drawings but the gears didn't have enough torque and the wheels slipped on wet floors. I made the following changes to the prototype I built: 1. I duplicated the front Wheels (Part #23) to replace the back wheels (Part #3) 2. I duplicated the Roller GearWheel V2 (Part#9) to make the back wheels work the same as the front wheels 3. I duplicated the Reducing Gear (Part #24) to connect the new back wheels to the gear mechanisms The gear torque works great now but the 4 wheels still don't have enough surface contact to stop slipping on the wet floor. I believe all 4 wheels need to be wider to have more surface contact to stop them from slipping (hydroplaning). Challenge: I need the wheels to (#23) to be as wide as possible and change as LITTLE as possible to the rest of the parts and avoid extra costs. I am pretty sure I will need to re-print the Reducing Gear (#24) to make the wider wheels work with them. If I have to adjust the holes on the Plate (#7), I would like to do it with a drill instead of reprinting them. I am hoping there will not be any changes needed to Roller GearWheel V2 (#9)
4 simple CAD 3D print ready items required (drawing supplied) - ongoing work
We have 4 items that we can knock up in sketch up in about an hour. However, sketch up doesn't handle recesses or chamfer very well. We are looking for these 4 items (2 are incredibly simple) to be made print ready for us to print, test and revise.
3D CAD Revision Of Skull & Snake
I need a simple revision of this design. It was created in SolidWorks but I guess it can be revised in any 3D CAD software as long as the file is saved .STEP. A mold will be made from this in a CNC Milling Machine but as it is now can't be made because there is a space between the snakes body and the top of the skull. The body of the snake has to move down. See attachment 2 for exact position. You can download the original STEP file to work on. It is the first attachment but might take a few minutes as it is a large file.
Stackable dresser
I have provided a basic design of a piece of furniture that I would like to provide to a CNC fabricator to be cut out for assembly. I need my Powerpoint sketches turned into a 3D design and the component pieces layed out for cutting on the two pieces of plywood to be used. This design will be sent to the CNC fabricator for cutting.