2-Story Residential Addition

in CAD Design held by Eric Gilliland, PE
Contest Closed
I need structural plans. Design will consist of (4) structural plans and (2) Details: Roof Framing, Floor 1, Floor 2, Foundation, Beam Replacement Detail, and Typical Wall Detail. Each floor is 13' x 10'. I will be providing you all specifications for each drawing.
Sheets are 11x17. See Description for criteria. I don't have a template so I need to use whatever you have available.
  1. AutoCAD


No Entries Submitted Yet.


No Comments Submitted Yet.

Similar Contests on Cad Crowd

Hover fit
HoverFit is an exercise device used to strengthen the upper body. The device is comprised of a circular ring with padding in the inner portion for comfort. It is approximately 10” in diameter. Users put both ankles in the ring and strap down the padding. Users utilize a percentage of their own weight to complete the movements. There is a moving mechanism that keeps the device from becoming tangled and allows for free rotation and movement. The device can be hung from any suitable location above the user.
Totem Pole
I am looking for a CAD or 3d Studio Max drawing of 8 totem pole sections. These sections are going to be cut on a CNC laithe out of wood logs. There are going to be 2 top sections and 6 interchangeable mid sections. The top sections are going to be some kind of bird that have cutouts for insert able wings. One of the birds is to have a flat beak and the other one a large beak that is machined separately. The wings are going to be cut from about 3/4" thick wood. There will be two sets of wings (4 total) two large and two small. The large wings will be about 12" X 36" and the small wings will be about 8" x 20". All sections to be 36" to 60" long using 9" to 16" diameter logs. The base of the top sections and the top and base of all of the mid sections need to be similar diameter so that they can be stacked on top of one another. There is a significant artistic component to this project. There are some models available online to get a start with but they will need to be modified and added to. Keep in mind that all of the pieces need to have a similar theme. All of the pieces should be a stylized depiction of a north american animal ie. moose, bear, beaver, squirrel, turtle, eagle, owl etc. A mosquito would be great too.
Think out side the box, a new take on photo booths. Innovation starts here.
Greetings. As a commercial photographer I was getting sick of this DIY Photo Booth market. So I've spent the past 2 years prototyping different products to combine to make a reliable product to take to market. While doing this we built a company that would let our products be tested in the real world. This is my first time posting for CADCrowd so we will be as detailed as possible, if you need any more info please leave a public message or send me a private message. What we are looking for: We want to build a product that is innovative, stylish, light weight, collapsable yet durable. We are sick of seeing Boxes. We want a unit that is free standing and curtain-less. I would love a stainless steel or aluminum face, but are open to other ideas. We don't want the end product to break the bank when it comes to manufacturing so would like materials to be widely available. Height - We would like the unit to be at its tallest 70" would like it to have removable sections so hight could vary. Free standing Collapsable/mobile - END GOAL would love for the entire unit to break down in to ONE 1650 Pelican Case. Simply assembly - would like this process to go quick, maybe pins/magnets/dovetails maybe power integration from base to components. Durable - This unit will be on the go, seeing 50-60 party's a year, thats 10,000 - 50,000 potentially drunk people a year and would love to get at least 5 years from it. Stream line - think of apples clean cut designs, would love for it to feel simple, not threatening. Products: Specs Available online or upon request. HITI 510L Printer - needs side access for paper and ink, can only print on a angle of up to 30 degrees, would love for paper to come out on the front under/lower then the screen. the printer can be removable or bolted to unit. (consider break down) Windows surface tablet - needs to be accessible for touch screen, needs to be mounted flush or minimal clearance for clean design. needs access to power and usb ports from the back. Camera - standard DSLR camera. would like to have a 77mm UV filter mounted for the camera to touch up against. a dovetail plate would be great to let the camera move back and forth for different lens (up to 8" of slide) Lights - would like to place LED's and a flash tube on either side of the camera so we will need holes and diffusion plexi/plastic for this as well. we will most lily be making our own boards to mount so there aren't any specs on this yet. Adjustable angle mount - would like it if the tablet/camera/light were mounted together with a potential of up to 20 degree horizontal tilt. (consider whats behind the faceplate, don't want gaps where fingers can get caught. I hope this sums up needs and wants. I will include a quick sketch of our ideas to maybe fuel your inspiration.
Experienced freelancers required for CAD conversion, drafting, 3D visualization services
Hi, We are looking for experienced freelancers who can take care of 2D & 3D drawing, drafting, 3D visualisation and remote access file viewing services, delivering tailored solutions to leading Building Services Consultants, Contractors and Architects. Interested freelancers or small companies can contact us with their portfolio. Looking for reasonable rates too. Thanks Narayan
Gym Equipment Design
We are trying to create a new piece of gym equipment. Please view the images for an example. Important Aspects: - Bench has the option to Rotate Horizontally (Axel Attached) - Bench can be locked into Position so that it doesn't rotate - Height Adjustable from 6 various heights using 2.5cm increments - Lowest Height 37.5cm (Measured from Floor) - Tallest Height 50cm (Measured from Floor) - Rubber Foot Attachments (Prevent Sliding) - Easily Disassembled into 6 Pieces The exercises that it will be used to perform: - Hip Thrusts (Bench Rotation Required) - Bulgarian Split Squats (Bench Rotation Required) - Box Squats (Rotation NOT Required) - Step Ups (Rotation NOT Required) This video provides an example of a similar piece of equipment: https://vimeo.com/208091402 Our Key differences: - Easily Transportable - Bench (Rectangular Cushion instead of Foam Cylinder) - Option to Lock Seat (so it doesn't rotate)