Nut Case PuzzleBlind

in CAD Design held by guest
Contest Closed
Description:
The product is a hollow bolt that can be unlocked and twisted apart. It’s modelled after the “nut case” puzzle, but should be much higher quality. There should be two nuts threaded to twist up and down the shaft. When the nuts get to the head of each bolt, they should turn freely counter-clockwise to match a number on top of each bolt head. In addition to the primary threads that allow the the nuts to twist up and down the bolt shaft there should be a lip with an opening that lines up with dog clips (or protrusions) at the end of each bolt opposite its head. This opening is matched by lining up a number on the nuts with the appropriate number on the head of the bolt. Once the numbers are matched, the bolts can be pulled apart and the nuts screwed back towards the center of the shafts, pushing the dog clips and separating the bolts. When the nuts meet in the center, the user should be able to rotate the heads of each bolt counter-clockwise to release the nuts and take the puzzle completely apart, or thread the nuts back up the shaft to return the puzzle to one piece.
Wants:
I need two drafts: one that matches the dog clips to 11 (nut) to 6 (bolt) and 6 (nut) to 11 (bolt); then one that matches 11 (nut) to 9 (bolt) and 9 (nut) to 11 (bolt).

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

Taylor Sunroom- floor plans, deck plan, roof plan & elevations
1. To scale metric Site Plan (showing new layout of sunroom and decks) (revise from existing plan not to scale) Foundation plan, floor plans, deck plan, roof plan, elevations (3), Section & section details (revise from existing drawings) New drawings for an upper deck (measurements provided) with side spiral stairs
Electronic toothbrush Floss head
I have designed a reusable floss-head attachment for a sonic toothbrush. The purpose of this design is to send to a machinist in order to create a plastic injection mold. The issue I have is that I am not an experienced 3D modeler. I used sketchup to create the design and then used free cad to convert the STL file into a STEP CAD file. Each machinist I have sen the STL and CAD files to has not been able to work either of these files.
ART CAM tool paths for cnc
I need my own pen and ink drawings converted from JP2 to g code for a CNC milling project.
Original Sketches to DWG Re-Draft / Conversion (2 weeks)
Required is to convert original architectural sketches into layered DWG drawings. The unit of interest is the first unit from right to left and the work can be limited to re-drafting of plans and details only for this unit. Details from mid units must be used to overlay details for the unit of interest (as the original drafter provided greater details that apply for for all units only on the 2nd, 3rd of 4th units)
Interchangeable frisbee disc design
Hello, Looking for a qualified individual to draft a CAD design for a disc golf disc aka frisbee disc that has a standard center core that can be screwed into exchangeable outer rims. The design must be within specs that I have outlined and feature an air tight interlocking design that will not come loose when the disc is thrown or hits an object. Production of this item would be injection molded with TPE.