Women's ring designBlind

in CAD Design held by mattproper
Contest Ended, Winner(s) have been selected.
Description:
Hi, I need 3D CAD step file & rendering for a silicone wedding ring that will be made from a steel ring mold.

Logo (attached) needs to be debossed on the inside & the number 7 on the opposite side inside

Please see attached images for the ring design.

Dimensions of the ring should be:

Width: 3.6mm
Thickness: 2.3mm
Inner Diameter: 17.3mm
Inner Circumference: 54.40mm
Wants:
Adhering to specifics
Ability to translate images into 3d model
Software:
  1. Solidworks, Autocad

Entries

1st Winner
#8 Ring for mattproper by Kunal Nandi
Here is a STEP file of the final model, a dimensioned drawing and some images of the ring.
I took special effort in debossing the logo and letters correctly. If rework is required once the contest is over please do not hesitate to get in touch.
Best regards, Kunal
more
Jul 25, 2018 23:10
#11 Women's ring by handsketcher
Designed according to your spec. Pls let me know your thoughts about this.
more
Jul 26, 2018 7:13
#14 Bondwell Wedding Ring by Design Territory
The design is made in SolidWorks 2018. The neutral file formats (IGS, STEP and x_t ) are uploaded along with other renders. Different material can be applied and shown upon request.
more
Jul 26, 2018 16:54
#18 RING by Jacob Jose
Hey Matt,
I've included two design files (F1.STEP & F2.STEP) each having a different no of twists. They are both satisfying the dimensions you've mentioned. Also included the SolidWorks parts files and renderings of the same. Please check the design files and mention if anything else should be done. Awaiting your feedback :)
Regards,
Jacob
more
Jul 26, 2018 22:02
#21 Ring by MS22 Design
Ring Model
more
Jul 27, 2018 7:04
#22 Beautiful Women's ring by Ivan Zerpa
Ring design with the specifications required by you.
If you have an additional requirement please contact me I am at your service
my best wishes
Sincerely
Ivan Zerpa
more
Jul 27, 2018 8:38
#28 Concept2 by DesignAssist
Given the ring a more twisted/flattened cross section. Raised the logo as embossed and also upped the font weight a bit to make tooling much easier.
more
Jul 27, 2018 19:45
#1 Bondwell Women's Ring by Anne Pauley
STEP files and renders for ring design that meets all requirements
Options for both filleted and un-filleted designs
Additional renders attached
more
Jul 25, 2018 3:55
#10 silicon ring 1 by Mecanikad
Hi. Please check and rate if you like.
more
Jul 26, 2018 4:39
#15 Ring by Equoniz
Ring modeled in SolidWorks. Renderings done in SolidWorks with PhotoView360. Texturing, coloring, lighting, and all model details can be adjusted as needed.
more
Jul 26, 2018 19:42
#23 Women's ring by wolflv
Fully customized according to size, with steps format, LSR-Moldel can be directly produced.
more
Jul 27, 2018 8:46
#5 Women's ring design by Harjeet Sharma
Hi,
I have attached all the necessary images with .STEP file.
Thanks & Regards
Harjeet Sharma
more
Jul 25, 2018 15:23
#6 Concept1 by DesignAssist
Jul 25, 2018 15:28
#13 Women_ring by astonetech
Women ring is made on autocad 2004 software & rendered on fusion360
more
Jul 26, 2018 12:10
#17 Ring by unocuatro
Regards, attached renders of the model. It was modelled acording dimensions and specs. I can provide you .step file. Waiting for your feedback.
more
Jul 26, 2018 21:03
#27 silicon ring 2 by Mecanikad
Hi. Yhis is my second presentation. Smoother edges. I hope you like it
more
Jul 27, 2018 18:08
#4 Women's Ring by Eira
This is my third entry, with small changes to make it looks elegant & comfort when wear.
more
Jul 25, 2018 11:55
#7 Women's Ring by Krisnadi
This my first design to this entries...
I hope your feedback of my design soon...
I awaiting...
Best Regard
KRISNADI
more
Jul 25, 2018 16:19
#16 Women's ring. by Bstang
Jul 26, 2018 20:06
#19 ring by marcosz
hello I send you the model of the ring, I hope your comments
more
Jul 27, 2018 4:13
#25 Women Ring by Alzazari_tech
Hi
I hope you like my design
Please rate or comment, any feedback is appreciated
Best regards
Rashid Ridha
more
Jul 27, 2018 15:04
#26 Women's ring by Said cad
Hi,
I've included a design files (Ring.STEP ) and a professional Presentation Video
more
Jul 27, 2018 15:28
#12 wedding ring by PULKIT JAISWAL
Jul 26, 2018 10:32
#20 ring by tsuen
Hope you like the design.
more
Jul 27, 2018 7:04
#9 Ring for mattproper by Kunal Nandi
Here is a STEP file of the final model, a dimensioned drawing and some images of the ring.
I took special effort in debossing the logo and letters correctly. If rework is required once the contest is over please do not hesitate to get in touch.
Best regards, Kunal
more
Jul 25, 2018 23:16
#29 FINAL by Jacob Jose
Hey Matt,
Made the changes you asked for
-Changed the no.of twists to 20
-Included the fillets and curvature of the inner face (N: B Do inform me if more curvature is needed)
-Decreased the logo embossing value to .20 mm
-Changed the font to exactly match your logo.
Hope you like the modified design. Inform me if any more changes are needed.
Regards,
Jacob
more
Jul 27, 2018 20:30
#30 Women's ring design by sherifelsheikh
Jul 27, 2018 22:40
#31 Women's ring design by DjayRC Design
Jul 27, 2018 22:56
#32 Women's ring design by DjayRC Design
Jul 27, 2018 22:58
#33 Women's ring design by DjayRC Design
Jul 27, 2018 22:59
#34 ring design by RBLdesign
Hi. Attached the wax print ready files. :)
Regards.
more
Jul 27, 2018 23:04
#35 Women's ring design by DjayRC Design
Jul 27, 2018 23:40
#36 Bondwell Women's Ring (v2) by Anne Pauley
STEP files and renders for ring design that meets all requirements, including dimensions and number of twists.
Options for both filleted and un-filleted designs
Additional renders attached
Updated version with smaller font as an option. Logo is debossed directly from the included photo and is therefore highly accurate.
more
Jul 27, 2018 23:48

Discussion

Fri, 27 Jul 2018 12:42:32 +0000
I could not upload design. Please help (unknown error)

Ivan Zerpa

Designer

Fri, 27 Jul 2018 02:11:16 +0000
working. Dear friend please do not close the contest prematurely

mattproper

Buyer

Wed, 25 Jul 2018 21:21:30 +0000
Yes, it can be done in another modeling software
Wed, 25 Jul 2018 17:07:01 +0000
The requirement is for step file. Do you still need solidworks or AutoCAD to be the preliminary software for modeling?
Can it be done in any other modeling softwares?

Similar Contests on Cad Crowd

Clothing Shop Plans
i want a designer to transfer my idea to 3D plan , i want make a design for men clothes shop from outside and inside , i want inside decoration like a cave or rock wall and show the clothing stand and table and from outside the shop face all is glasses and the door in the middle with black banner for shop name "GRAY WOLF" , the shop size is 6x10 meter , please check the attachment maybe it will help you ,thank you.
Media Unit and Walk-In Closet Shop Drawings
I'm looking to hire someone immediately to provide detailed millwork shop drawings for a living room media unit and walk-in closet (see architect's drawings attached). Drawings will need to be completed in Autocad, in inches with provided title block. I receive a lot of this work so if all goes well, it will lead to many more projects in the future. See attachments for detailed info.
TAF
Needing someone to design a floor plan. taking into account the needs and lifestyle of the occupants
Conceptional physics design
This is a abstract design for a physics project about energy conversion using high charge density. The design is called longitudinal plasma vortex energy converter: a counter-rotating outer quartz cylinder with an internal counter-rotating epicyclic gear train with a downward facing rounded point nozzle connected to a low-pressure turbine and located where the sun gear is located. The system also contains a clockwise-rotating inner quartz cylinder with an internal clockwise-rotating epicyclic gear train with a upward facing pointed edge nozzle connected to a low-pressure turbine and located where the sun gear is located. The representation is designed to showcase a closed system in which the plasma is pushed upward by the clockwise-rotating turbine and pointed edge nozzle and then pushed downward on the sides by the counter-rotating turbine and rounded point nozzle of the outer cylinder (motion shown by green arrows). Attached please find a drawing that I want the designer to refine to the best of his/her talent.
Iphone Templates For CNC Vinyl Cutting
We are looking for 1:1 templates for iPhone 6, 2 different designs. You must be able to source the exact measurements as we don't have them, they will be cut from viynal and must be a precision fit. We need in AI & Cad File.