ASAP Autodesk Inventor tweaks

in 3D Modeling Design held by WorldwideSCT
Contest Closed
Description:
Looking to make a few minor changes to an existing design for a device case.
Wants:
Experience in Inventor
Software:
  1. Inventor (2017 or 2018)

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

Setra Nano Design Options
There is an attached image of a new product concept, which is essentially a wall-mounted sensor that shows a light ring indicator of red or green. The product is designed to cover a single-gang US electrical wall box, similar in size to a wall switch. Once wall-mounted, it stands off the wall about 10 mm, where the light ring can be visible from front or side. We want some industrial design options to look at that are different from our design.
Handle / Grip design with gear & Latch
The design needed is for a handle / grip that when squeezed, it will make a 3/8" square bar, which is in a 1 1/2" high extruded piece, travel aprox 2 1/2" towards the grip. See short video. This also needs to be able to lock into multiple positions when squeezed and also have an easy release so that when released it springs back into its original open position. This will be attached to the end of the 1 1/2" high extrusion. There are 2 openings in this extrusion. One along the top will be a square opening in which the 3/8" square bar will be encased and the other one will be a round hole which will encase a 3/8" round tube in which water will travel through. This round tube will need to extend out the back of the extrusion and through the handle and attach to a water hose. The handle / grip needs to extend up above the extrusion a minimal amount. The attached picture of my prototype extends way too high above the extrusion. One thought is to incorporate a rack and pinion type gear to achieve this. Any type of gear or mechanism will need to be enclosed in the handle.
BM1AT Redesign
We have a board designed in Kicad with through-hole components and want to replace most of them with SMD counterparts. Board dimensions, terminal blocks and a few more components located around the board's edges cannot be modified. Specifications: Board dimensions: 8.200 x 3.420 inch PCB: 2 layer FR4 1.6mm green Integrated circuits: ATmega1284P-PU (x1), ULN2803 (x2), 74HC595 (x3), CD4021 (x3), DS1307 (x1) and PB82B715P (x1). There is also a piggyback step down buck converter that may be integrated in the main board but this is not important now. Passive components: 66 1/4W resistors, 28 ceramic capacitors, 31 diodes, several plug in terminal blocks and more.
Leaf Dental Care
My company is "Leaf Dental Care", and our mantra is "Eco-friendly Wellness". We will operate an eco-conscious dental clinic that treats our patient with a holistic approach. The project is to create a visual diagram of what the Reception Area and Operatory Room will look like. The Reception Area will be ~400sq ft, and have a store front with floor to ceiling windows. Theme: yoga studio, spa, Zen garden Color Scheme: White, earth tones, wood, stone. The waiting area will consist of a "retail portion", and a "reception portion" Retail Portion: There should be store front display for retail items such as organic health and beauty products. Like an "organic" Sephora. Our neighbors will be high-end retail stores, and we should blend in. Reception Portion: My logo should be displayed behind the receptionist desk. There will be organic cotton fabric couches for people to sit and wait. The kids play area will consist of wooden block toys by Melissa and Doug. LED television will be playing health educational videos. Patients can fill out medical information on tablets. Lighting will be indirect LED lighting. Ambient music will be tranquility music. All medical professionals are wearing yoga clothes instead of scrubs and lab-coats. Operatory Room Diagram: The theme is carried over to the operatory rooms.
Mosquito Trap Redesign
We want to redesign our UV LED mosquito trap, an outdoor product to be placed in tent, outdoor café, farms to reduce the damage by mosquito. It should be simple, solid, low priced, slim, good quality and fashionable- a mid-way between high-tech and disposable traps. We would like its housing to be partially transparent for the visibility of LED light. Also, we prefer the entry point for mosquito to be a maze design. Type: Mosquito trap Target Audience: All age groups Competitors: enclosed in attachments Design: Maze entry point, partially transparent body, UV LED light, PCB board, cotton stand to put cotton soaked in mosquito attractant liquid, 2AAA battery case Material: Plastic Any software is acceptable if STL format file can be provided Any further questions, please feel free to comment.