solid works modification

in CAD Design held by guest
Contest Closed
Description:
i need to reduce length tube by an inch, make it fit better on male threaded part, plus:

2. make narrower end fit over a 7/8" diameter tube,  and the larger end over a 1" tube.


3. make male threaded part fit onto a 1" diameter tube.

I have make threaded part in solid works too but unable to attach it.
Wants:
speed, cost
Software:
  1. SolidWorks

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

Bottle Design
Here i need someone to make plastic bottle design of four sizes i.e. 100 ml, 250 ml, 500 mp and 1 litre. The bottles are related to agricultural product so it should look like agricultural bottle by means of features such as its shape or its theme or engravings etc.
Hydroplane Challenge
I have made a prototype of the attached drawings but the gears didn't have enough torque and the wheels slipped on wet floors. I made the following changes to the prototype I built: 1. I duplicated the front Wheels (Part #23) to replace the back wheels (Part #3) 2. I duplicated the Roller GearWheel V2 (Part#9) to make the back wheels work the same as the front wheels 3. I duplicated the Reducing Gear (Part #24) to connect the new back wheels to the gear mechanisms The gear torque works great now but the 4 wheels still don't have enough surface contact to stop slipping on the wet floor. I believe all 4 wheels need to be wider to have more surface contact to stop them from slipping (hydroplaning). Challenge: I need the wheels to (#23) to be as wide as possible and change as LITTLE as possible to the rest of the parts and avoid extra costs. I am pretty sure I will need to re-print the Reducing Gear (#24) to make the wider wheels work with them. If I have to adjust the holes on the Plate (#7), I would like to do it with a drill instead of reprinting them. I am hoping there will not be any changes needed to Roller GearWheel V2 (#9)
Stackable dresser
I have provided a basic design of a piece of furniture that I would like to provide to a CNC fabricator to be cut out for assembly. I need my Powerpoint sketches turned into a 3D design and the component pieces layed out for cutting on the two pieces of plywood to be used. This design will be sent to the CNC fabricator for cutting.
3D CAD Revision Of Skull & Snake
I need a simple revision of this design. It was created in SolidWorks but I guess it can be revised in any 3D CAD software as long as the file is saved .STEP. A mold will be made from this in a CNC Milling Machine but as it is now can't be made because there is a space between the snakes body and the top of the skull. The body of the snake has to move down. See attachment 2 for exact position. You can download the original STEP file to work on. It is the first attachment but might take a few minutes as it is a large file.
4 simple CAD 3D print ready items required (drawing supplied) - ongoing work
We have 4 items that we can knock up in sketch up in about an hour. However, sketch up doesn't handle recesses or chamfer very well. We are looking for these 4 items (2 are incredibly simple) to be made print ready for us to print, test and revise.