Wooden Carvings
in
3D Modeling
held by
kiran@cw
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We need 3D rendering of the drawings attached in a STL format. The designer will need to interpret the drawings into 3D models which will be used for wood carvings with a CNC routing machine. The appearance should look as if hand-carved.
Wants:
Files should be suitable for CNC carving so they need to be high resolution.Triangular piece:
8 ½” x 9- 7/16” Relief: ½”
Rectangular Piece:
3 ¼” x 19” Relief: ½”
Don't Wants:
Designer should not deviate too much from original drawings.
Software:
- aspire
Additional Information
Here are some more details to answer the questions we've been asked for this contest:The overall thickness is 7/8". From the zero plane of the surface to the highest point it should be about 5/8".
The outer rectangular box size is 3 ¾”x 22-3/8”. The approx size of the carved section is 3 ¼” x 19”.
The edge of the panel goes into a groove so there is no detail on it. There is just a carved portion.
Prepaid PrizeEntries
Discussion
Do you have a quality image file of the carve design? When I export a image from your solidworks e drawing file which you have give, the quality of the final product become low in aspire..if you have a image attach here asap
Thank you
Thank you
For the people who couldn't open the original dwg file, I have uploaded a lower CAD version. Please try the file name "carving" (all lowercase).
Some people are getting confused about what the end result should look like. Here is a link that shows what we are looking for in terms of 3D carving.
http://3dcarving.blogspot.com/2012/01/basic-3d-carving-technique-02.html
http://3dcarving.blogspot.com/2012/01/basic-3d-carving-technique-02.html
Please note that the first submission by filiposki was not correctly done. We do not want an embossed look. We want a carving.
jmorrow-
We will be running this on a 3 axis CNC. We have all basic tooling for the CNC. We will be doing a lot of the work with a 1/8" ball tip and we also have a v grooving tool.
We will be running this on a 3 axis CNC. We have all basic tooling for the CNC. We will be doing a lot of the work with a 1/8" ball tip and we also have a v grooving tool.
what tooling do you have to help in the tool path and tool forms while designing in aspire
I will have our designer send the lower CAD version.
youssef90-
I will try to upload the file in STL format.
youssef90-
I will try to upload the file in STL format.
File not opened..not supported
Please save as with lower CAD version!
Can you Upload the file in STL format?
because this file in DWG and is not available!
because this file in DWG and is not available!
Similar Contests on Cad Crowd
Mr Jinendra Shah
We value our client’s time and thus try our best to churn out these high quality 3D photorealistic models within the shortest turnaround time possible.
Thermoforming Machine Design on OpenSCAD
Can you convert our existing thermoforming machine drawing which is in Autocad 3D and 2D format to an OpenSCAD based drawing ?
KeyShot Photorealistic Renders
We commissioned five photorealistic images to be created in KeyShot. As you can see from the final results, the images are very nice...but they aren't photorealistic.
Your job is to take the five .ksp files and make them truly photorealistic. If you already have the skills then this is an easy project.
Do not change the colors, models or camera angles. Just take our existing work to the next level. Make it truly photorealistic.
Please deliver to us both multi-layer .psd files (with transparency) and updated .ksp files.
build up 3D person model files (obj, stl..) from 2D pictures.
Dear Mr. / Mrs.
I am looking for the service that build up 3D person model files (obj, stl..) from 2D pictures.
I am running a small bussiness in Vietnam and daily have this request from customers. So I would like to receive a good offer for long co-operate.
https://www.dropbox.com/s/pehlvb9wx038zjm/Quan%20May%2020%2014.rar
Here are sample photos and the object file that I creat by 123D Catch, I have 3d scan by Kinect too (because it is too large so I uploaded to dropbox). I just need only head of person.
Regards.
Satellite model - from photos
I am looking for a a 3d water tight stl of the attached Pictures. This is needed by March 31. Texture is not required, just the shape, with medium detail (printing on FDM printer at .18 mm) The struts supporting the underside of the dish do not need to be intricately done. It Can be three separate parts if needed. The object cannot be any larger than 150 mm x 150 mm x 150 mm
Aravinda
Designer