Design a sellable nerf p90 from scratch
in
3D Modeling Design
held by
gavinb2
Last seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Description:
Here i am going to be selling a nerf p90. You have to make a p90 as a 1-1 replica with custom nerf magazines that look exactly like a p90 magazine. Since im selling it you have to make every item from scratch. This is a brushless build which will use this websites flywheels, and motors, and they have designs for the flywheel cage (closest spacing 39mm, furthest spacing is 40mm) it will have an oled screen powered by the arduino uno. On the butt of the stock, it’s magnetic which can be taken off (just the grip part) and there is a little battery tray which connects to a xt60. The tray can hold pretty big lipo batteries and is easy to pull off. This will shoot half length darts, and the flywheel cage is NOT going to be horizontal because the blaster would be the normal, clean look then this glob of spacing that looks ugly so they will be vertical with NO extended parts for holding the flywheels. The pusher motor can handle 3s-4s lipos with a max of 35 DPS. Next to the oled screen will be a knob that can be pressed down and turned infinitely to the left and right. This will be used with the oled. There is a housing for the uno, that holds all wires comfortably with little holes that they run through and there is a cap to it so once you remove the cap then you remove the uno and wires. I am righty so if you put the blaster on my shoulder like i will shoot it since its on my right arm, the space between the stock will have the screen as well as the knob closer to the magazine side not closer to the butt stock. If you have any questions or need pictures for information message me but here are the links you need, and my description for how you need to code the arduino and oled.Motor: kellyindustries.us/collections/flywheel-parts/products/plus-motor-brushless
ESC: (2x) outofdarts.com/products/brushless-esc-30a
Flywheels: kellyindustries.us/collections/flywheel-parts/products/daybreak-wheels-for-plus-motors-brushless
Oled: www.cadcrowd.com/safety
Arduino:
store.arduino.cc/products/arduino-uno-rev3
knob: you find a suitable one OR design one.
Some useful sources (keep in mind one of these has a normal nerf magazine i want mine like a normal horizontal p90 magazine with the circle
www.instagram.com/rraijjar/
www.printables.com/model/129568-real-files-n90-wip-by-sch00f
mine will look more similar to rajjars
Oled description:
The oled screen would show these features. My oled has buttons that you can press with your finger that do actions. So theres going to be 5 buttons that you can click on (ammo counter, select fire, FPS, DPS, Lipo Warning, Save and Load. Here is the function for everything: ammo counter makes it so you select the amount darts in the mag and counts them as you shoot it. It has several modes made once you click it like (tachi, koda, talon (15) talon (18) which when you click it it selects your magazine type. Tachi holds 29, koda holds 22, and you get the 2 talons. There’s a (+) feature where you can use the knob which when you scroll left it lowers the number, when you scroll right it increases it, and then you can press on it to select it. Then you can name it with a small keyboard and a text box telling you what to write. You can use your fingers but the knob will work with everything. When you select a magazine type with your finger or with the scroller, it brings you back to the main screen and gives a quick pop up message saying in bold with a square around it that everything else disappears and says if you press lets say koda, it will say Successfully chosen “koda” then it says auto exited. Then for the next button, keep in mind since theres the 5 buttons, 2 on top 3 on the bottom, the scroller will highlight them if your on it and if you are on the last one of the top, and scroll to the right if your on the top right button then it brings you to the bottom row. This works with every corner. On to the next button which is select fire. When you click or press on it, then it has 3 buttons, Single Round, Burst round where right after it says if i chosen 3 round burst it will say Burst (3), and then full auto. In the bottom right there will be a mediumly sized button saying “edit” where it edits your burst fire where you can pick from 2 to 5. Then after hitting edit and selecting it, you press the number and it brings you back to the select fire screen where it hasn’t chosen anything yet since you only edited the burst. If i chose 4 round burst, then it will say Burst (4) and then you can press any of the 3 buttons and that will select it bringing you back to the Home Screen and saying that you chose lets say burst (4) and auto brought you to home. For the next button, FPS, when you select it, there will only be one button. When selecting the edit button in the bottom right corner of the screen, it will show a percentage of the power that the flywheels are spinning at. If mine is at 65% power, on apple devices, how for stop watch or clock how your number is bright and the rest of the numbers below and above it get darker and darker. So thats what it will be like so you can select any power by turning the knob to the left or right where the least number you can pick is 15% and the max is 100% after hitting 15%, and try to scroll down lower, a red sign prompts up that 15% is the lowest power you can go and dont scroll down anymore. Same for hitting 100%, so on the arduino, these all do something so 65% makes the flywheels spin 65% speed. After clicking your number lets say 65%, then you will exit the editor and still be on the fps screen mode and click the fps button which will say fps (65%) then click it and it says the message. For our next button, DPS, this controls the darts per second this will do. Same with fps, lowest is 15% and 100% is the max with the red screen. Exiting the editor and back to the Home Screen and to the next button. “Lipo Warning” is our next feature that will detect if you put anything more or less than a 3s lipo It will tell you to unplug your battery and put a 3s lipo in, and thats the only supported battery type. Then it says this may break the blaster. That’s not even pressing the button. Pressing the button tells you how many volts are left in the lipo and when to charge it if it gets below 11.3 volts. After 10 seconds it automatically shuts off. For our last button, “save and load” save and load is a button that when you press it, it has 2 buttons on it saying save, and the other button is load. When clicking save, it saves everything you did and all your settings, and makes you write a name for the save slot. Then theres an enter key and i forgot to say but for the ammo type button like the magazine, theres a delete button, space bar, capital key, and enter key. No special eaters allowed, only letters and numbers. After hitting enter, it says in a popup successfully saved and created slot “” with the name so if my name was nerf battle 1 then it would say successfully saved | created save slot “nerf battle 1” you have a total of 10 slots. For load, you just click load and can scroll through all your saves and under the name will say what you picked so under nerf battle 1, in smaller writing will say 4 round burst, koda mag, and then your fps and dps percents. And yeah thats about it if i make some small changes or if you need something to be changed thats fine. Also when you plug in your lipo, everything gets ready, and the screen turns on when you plug in your battery, and click the knob once, or touch the screen. When it turns on it will say im still working on the design GV, with the GV having small letters in between so my name is (Gavin Vanguard), but the capital letters will be bigger and the inside letters will be like 0.35 of the size of the actual big letters.
THE IMAGE I PUT IS LIKE THE N90, WHICH HAS A VERTICAL MAGAZINE. YOU ARE DESIGNING A SPECIAL ONE
THE LONGEST I CAN MAKE THE CONTEST IS 30 DAYS BUT YOU HAVE 100 DAYS.
Wants:
None
Don't Wants:
The flywheels to be horizontal like this: www.printables.com/model/658870-gnk-90-top-loading-solenoid-powered-brushless-nerf
Software:
- Autodesk Fusion 360
Payment PendingEntries
No Entries Submitted Yet.
Discussion
https://www.youtube.com/watch?app=desktop&v=2tjM3GSXOkw
Can we design this in solidworks software?
I can do that for you if you can pay an advance.
Hi, please make it prepaid to bring top designers...
Make it prepaid pls.
On my description for the oled screen, it should be able to take 3s and 4s and will automatically detect it. If its 2s, 1s or 5s + then it will give the warning screen
Similar Contests on Cad Crowd
power box
it is a box, come with 2 pcs 18350 batter and get a LCD dispolay to show the power capacity and alos on the box there are 3 buttons, one for switch on/off, and 2 for adjust specifications, if not 2 buttons, could be 1 pole or other design for adjust. also we need a connect on box to connect other device, it is kind of screw thread connection.
Underwater modular drone
The underwater drone is modular and autonomous. Users can assemble it from different modules fitting to each other similar to Lego pieces. Core modules are: stern with cameras and sensors, bow with propulsion system, battery, sonar, basket, a continuous robotic arm. It can work: with or without tether and recharge itself autonomously, has multiple internal navigation systems, has two independent moving cameras and lights enabling him to observe two things at the same time. The modules should be presented on the principles "Rubix cube". At this stage we are focusing on design and creativity, no need to include moving parts, they are a bonus.
Must be highly visible in the water.
(Book) 'Dragons throughout the Multiverse' Miniature design
I am a small independent self-publisher and the author/artist (Photoshop) for the Book (but that is the limitation of my design/technical expertise). This is a 3rd Printing of the book (40th Anniversary Edition) ©1982, 1994, 2022).
I Need to contract with a good (possibly more competively priced) STL designer.
I am going to start a Kickstarter Campagin to solicit presales for the STLs associated with this book *(and possibly do a jont-venture and/or profit share arrangemnt with the STL Designer(s) I select).
(The Book has over 80+ Dragons and their included photos)
*I can share samples of interior Artwork to aid in concept and STL design
Anyone interested please submit a sample of the design you create based on (photo supplied below - a more simple design IMO)). Also submit a portfolio of simialr works.
Thank you for your time and efforts.
Modeling & Graphic Design for a Modern Landfill
We are looking for some one to design a complete landfill for use on our Tradeshow booth. We are looking for someone who can layout the entire site. From the waste cell to the roads, to the working face of the landfill and Leachate systems, liners etc. We would also like to incorporate our equipment and products into the design. This is mostly for Leachate. What we are attempting to do is show how to Waste Companies can handle their leachate to save money.
There are 3 steps to this process.
The first is minimization. We have developed a spray on solution that will repel water from the side slopes of the landfill and on the flat top of the landfill. Ideally we show a rain cloud raining down on the side of the landfill here and then we can have our graphic artists do bubbles on the rendering showing where that product is used.
The second part we do is pre-treatment. We have designed a system that can process and clean the leachate. The leachate is pumped from the bottom of the landfill to holding tanks where we clean it from there it goes to Leachate ponds where our Evaporation Misting Equipment evaporates the water. We also have the leachate evaporated inside buildings.
Ideally we want to show the daily operations of a landfill and where all of our products are used on that landfill. Visiting our website will give you a very in-depth look at what we do
Attached are some samples of how landfills have been rendered in the past as well as a top view of a modern landfill in California. Also included is a aerial photo of a landfill cell being built with liner and a side view of all the layers that go into a landfill. If you have any questions or need more details please leave note
This image will be blown up to fit a booth that is 5'6" high and 113" wide
Fibre Optics Installation Design Using Siemens PLM Tools
Design of Fiber Optics Cable Implementation on a 45KM Pipeline ROW Using Siemens PLM tools for CAD Design, Modelling and Process Simulation.
Using Siemens SolidEdge, Technomatix Jack, TeamCenter and Into Site:
Design Alignment Sheet for the 45M Pipeline and Fiber Optics Cable and render a 3D model of :
Kolo creek End Facility FOC tie-in (telecoms room)
The 42km Gas Pipeline with a 48 Core Aqua-Marine Fiber Optic Cable (FOC) with Uraduct Cable Protection
Uraduct Cable Protection with Piggyback Clamps on the 10km swamp area
Showing the 18km Land section
Showing the 15km swamp Sections
Showing the 7km seasonal Swamp Section
Show the Splicing points for the FOC Joint boxes
Show all Major and Minor river crossing
Show all Major and Minor road crossing
Soku End facility Tie in
Well Heads to End facilities
Provide as built model of the project after installation and commissioning.
Steven Minichiello