Architecture Drawings: 3D Model/Technical Drawings
in
Construction Drawings
held by
lameyahalb
Last seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Description:
Hello i need help with my course for materials and methods. i have a project due next week; im supposed to build a model with real materials (brick,steel,MDF,concrete)
in order to start i have to draw the model using rhino. i saw one of your technical drawing assembly, it was very detailed, technical and good. That is exactly im supposed to draw but not an actual building/house; I need to pick a very small part of an assigned building from the exterior side (half a wall) , then draw it with details showing any technical and material construction.
- Detailed 3d model of that small structure
- 2D Drawings in details (plans,sections,elevation etc.)
[must be applicable for a contractor/engineer to understand how to build]
would you be able to help me out with this?
Please let me know when you get this
Much Thanks
Alya
Wants:
The structure model that i have to beuild is [36x18inches or 18x24inches]
- Detailed 3d model of that small structure
- 2D Drawings in details (plans,sections,elevation etc.)
[must be applicable for a contractor/engineer to understand how to build]
Don't Wants:
I dont want the entire building model. just literally half a wall.i attached pictures, the screenshots is the part i have to build/draw.
another picture is an example of details needed in the 2d drawings.
Ask for Sample:
I want to see progress just incase i need some changes
Software:
- Rhinoceros (RhinoCAD, Rhino 3D)
Prepaid PrizeEntries
Discussion
Hello,
can you answer to be able to help you?!
Make a rectangler on the part you want
can you answer to be able to help you?!
Make a rectangler on the part you want
did you get it done yet?
Hi Alya,
Couple of questions
1) Which screen shot to refer there are 2 (I suppose it is the larger one)
2) I could only see brick & concrete where is the steel & MDF?
3) Bricks appear to be rotated at an angle what is the angle of rotation? we have to approximate?
4) Approx. size of diamond pattern at the centre of the wall
5) Do you want the model with realistic render?
Couple of questions
1) Which screen shot to refer there are 2 (I suppose it is the larger one)
2) I could only see brick & concrete where is the steel & MDF?
3) Bricks appear to be rotated at an angle what is the angle of rotation? we have to approximate?
4) Approx. size of diamond pattern at the centre of the wall
5) Do you want the model with realistic render?
Similar Contests on Cad Crowd
Ting Casita
planning to put a simple Casita in my third garage. Friend will do the construction for me,need a reasonable price person to draft a plan for the city to approve.
Please code me an approximate price. Its a 20'x30' garage, the city allows to build
a 20'x10' casita out of it.So the Casita is only 200SF.
Structural Analysis Project
I have a structural analysis project and i would like you to help me with it
Universal Washroom Floor Plan - Layout Design in AutoCAD
This layout and design is for the building permits for a barrier free washroom. This washroom needs to meet the Alberta Building Code in terms of barrier free design (handicap accessible) and construction, but also has to have the smallest footprint possible. It is a free standing washroom in an industrial condo bay which is mostly unfinished. Essentially the washroom is freestanding on 3 sides on the 4th side backs up against a perimeter wall of the bay. (I have attached a rough sketch to give you an idea)
There is already a washroom in place but it was not built to the Alberta Building Code so I need to correct this issue.
The winner will have a solid understanding of what is required for building permits. I can provide the specifications for a barrier free washroom if desired, but the designer must come up with a cost effective and structurally sound solution.
Building Envelope Details
We have several projects coming up that require CAD services. They would include plans, elevations, details, and some 3-D models/renderings. For this contest create a detail from a simple sketch and a new title block for us so we can see your skills.
Notice Engineer& Technician.Tutor for Sap2000, Staad.pro, Revit
Notice Engineer& Technician.Tutor for Sap2000, Staad.pro, Revit
A P.Eng. holder with 12 years experience are available to teach ( Sap2000, Etabs, Safe, Staad.pro, Robot,Advanced Autocad, Revit, Tekla, Abaqus, Ansys, Civil3D , Csi Bridge) students, technicians and
engineers who apply for job.
I have tutoring experience with students from York ,Ryerson and Queen Universities and engineers from various structural firms.
I offer flexible timing.
I offer online tutoring via Skype for students from various places.
Direct email : behzadvaghei at yahoo.com
Tel: 6477161339
El-Domo